Swanstone FTS-3738 Specification

Transfer Shower Floors 

35"

35-1/2"

1-7/16"

1-7/16"

Veritek® SHOWER FLOORS

With Fit-Flo™ Drain

Manufactured from Veritek®   

(See page 2 for detailed information.)

FEATURES

• Will not mold or mildew, no grout to clean.

• Coordinates with Swanstone or Veritek® shower and bath systems.

• “S” pattern molded into floor provides a slip-resistant surface.

• Made of Veritek® with no surface coating to chip or crack.

Nominal  Rough-In Dimensions
Model  Size  38"  37"  19"  18-1/2"

FTS-3738 37" x 38" 38-3/8" 37-3/16" 19-3/16" 18-9/16"

Shower Transfer Floor

IMPORTANT: Rough-in dimensions are provided for reference only.
You must measure the actual shower floor and check local building code
requirements before construction of the stud wall.

Universal Design

WARRANTY

Limited Lifetime – Residential

Limited 5-year – Commercial

TUB AND SHOWER

SPECIFICATIONS

Transfer Shower Floors With Fit-Flo™ Drain 
        Ship  Ship  Carton

Model  Part  Nominal Size Dimensions   Wt. Lb.  FedEx  Dims. In.  Cu. Ft.

FTS-3738 FF03738MD 37" D x 38" W 46 – 45 x 43 x 10 12
(940 mm x 965 mm)

Includes: One code-approved compression-molded Veritek® shower floor with
molded-in Fit-Flo drain and installation instructions.

Packaging: Each floor packed in a rectangular carton.

ACCESSORIES

See page 101 for complete listing of all Universal Design accessories.

STANDARDS AND RATINGS

American National Standard Institute—ANSI Z124.1.2
International Association of Plumbing and Mechanical Officials (IAPMO)—Listed
CSA Standard B45.5 by IAPMO
Uniform Plumbing Code (UPC)

For a complete list of tests and results see the Technical Data Sheet – page 175.

SUPPORT DOCUMENTS

Installation instructions available at swanstone.com.

COLORS 

(See inside back cover for color sample.)

• White (010)

• Bone (037)

• Bisque (018)

• Bright White (137)

• Pearl (138)

MAINTENANCE AND   
CLEANING INFORMATION

Clean regularly with common household liquid
cleaners and a sponge or soft cloth. For hard
water stains, scale removers can be used. If
necessary, abrasive cleaners can be used with
a nylon brush or pad to remove build up on
the shower floor surface. Do not use a metal­scouring pad or a wire brush, as it will damage
the surface. Do not use “leave on” cleaning
products, such as automatic spray shower
cleaners. Prolonged contact with harsh chemicals
could have an adverse reaction over time and
discolor surfaces. Do not use cleaning agents
that caution use on acrylic, polyester or plastics.

Swan • St. Louis, MO 63101 • [phone] • swanstone.com 99