Swanstone FBF-3060L-R Specification

Barrier-Free Shower Floors

Veritek® SHOWER FLOORS

With Fit-Flo™ Drain

Manufactured from Veritek®   

(See page 2 for detailed information.)

FEATURES

• Will not mold or mildew, no grout to clean.

• Coordinates with other Swanstone or Veritek® shower and bath systems.

• “S” pattern molded into floor provides a slip-resistant surface.

• Made of Veritek® with no surface coating to chip or crack.

• Can be recessed for flush mounting or can be used with a ramp.

Nominal  Rough-In Dimensions
Model  Size  60"  30"  8"  15"

FBF-3060L 30" x 60" 60-3/8" 30-3/16" 8-3/16" 15-3/16"

Barrier Free (left side drain)

FBF-3060R 30" x 60" 60-3/8" 30-3/16" 8-3/16" 15-3/16"

Barrier Free (right side drain)

IMPORTANT: Rough-in dimensions are provided for reference only.
You must measure the actual shower floor and check local building code
requirements before construction of the stud wall. Meets ADA requirements
for use in existing bathing facilities, but not for new construction.

Universal Design

WARRANTY

Limited Lifetime – Residential

Limited 5-year – Commercial

FBF-3060R 

(shown)

Barrier-Free Shower Floors

Available in Right or Left Drain Placement.

FBF-1260 Shower Ramp

TUB AND SHOWER

SPECIFICATIONS

Barrier-Free Shower Floors With Fit-Flo™ Drain 
        Ship  Ship  Carton

Model  Part  Nominal Size Dimensions   Wt. Lb.  FedEx  Dims. In.  Cu. Ft.

FBF-3060L FB03060LM 30" D x 60" W 64 – 66 x 36 x 10 14
(Left Drain) (762 mm x 1524 mm)
FBF-3060R FB03060RM 30" D x 60" W 64 – 66 x 36 x 10 14
(Right Drain) (762 mm x 1524 mm)
FBF-1260 FB01260 12" D x 60" W – Ramp 25 – 66 x 14 x 2 1.07
(306 mm x 1524 mm)

Includes: One code-approved compression-molded Veritek® shower floor with
molded-in Fit-Flo drain and installation instructions.

Packaging: Each floor packed in a rectangular carton.

ACCESSORIES

See page 101 for complete listing of all Universal Design accessories.

STANDARDS AND RATINGS

American National Standard Institute—ANSI Z124.1.2
International Association of Plumbing and Mechanical Officials (IAPMO)—Listed
CSA Standard B45.5 by IAPMO
Uniform Plumbing Code (UPC)

For a complete list of tests and results see the Technical Data Sheet – page 175.

SUPPORT DOCUMENTS

Installation instructions available at swanstone.com.

COLORS 

(See inside back cover for color sample.)

• White (010)

• Bone (037)

• Bisque (018)

• Bright White (137)

• Pearl (138)

MAINTENANCE AND   
CLEANING INFORMATION

Clean regularly with common household liquid
cleaners and a sponge or soft cloth. For hard
water stains, scale removers can be used. If
necessary, abrasive cleaners can be used with
a nylon brush or pad to remove build up on
the shower floor surface. Do not use a metal­scouring pad or a wire brush, as it will damage
the surface. Do not use “leave on” cleaning
products, such as automatic spray shower
cleaners. Prolonged contact with harsh chemicals
could have an adverse reaction over time and
discolor surfaces. Do not use cleaning agents
that caution use on acrylic, polyester or plastics.

Swan • St. Louis, MO 63101 • [phone] • swanstone.com 97