Help Desk / Support Details
Swann Technical Support
All Countries E-mail: tech@swann.com.au
Telephone Helpdesk
UNITED STATES toll free
877-274-3695
(Sun-Thurs, 2pm-10.30pm PST)
800-627-2799
(Mon-Fri, 9am-1pm PST)
USA Exchange & Repairs
562-777-2551
(Mon-Fri, 9am-5pm PST)
AUSTRALIA toll free
1300 13 8324
(Mon-Fri, 9am-5.30pm Aus EST)
+61 3 8412 4610
(Mon-Fri, 9am-5.30pm Aus EST)
See http://www.worldtimeserver.com for information on different time zones
and the time in Melbourne Australia compare to your local time.
Warranty Information
English
Twin Value Pack
2 Camera Color
Video Surveillance
International
If this device does not work when you first plug it in,
do not take it back to the store.
Swann Communications warrants this product against defects in workmanship and material for
a period of one (1) year from it’s original purchase date. You must present your receipt as
proof of date of purchase for warranty validation. Any unit which proves defective during the
stated period will be repaired without charge for parts or labour or replaced at the sole
discretion of Swann. The repair or replacement will be warranted for either ninety days or the
remainder of the original one year warranty period, whichever is longer. The end user is
responsible for all freight charges incurred to send the to Swann’s repair centres.
end user is responsible for all shipping costs incurred when
other than the country of origin. The warranty does not cover any incidental, accidental or
consequential damages arising from the use of or the inability to use this . Any costs
associated with the fitting or removal of this product by a tradesman or other person or any
other costs associated with its use are the responsibility of the end user. This warranty applies
to the original purchaser of the only and is not transferrable to any third party.
Unauthorised end user or third party modifications to any component or evidence of misuse or
abuse of the device will render all warranties void.
product
product The
shipping from and to any country
product
www.swannsecurity.com
8
Contact the Swann Helpdesk using our fast e-mail service
tech@swann.com.au or call us on one of the Toll-Free
numbers shown on the back cover of this booklet.
Most problems can be quickly and easily fixed with a simple
e-mail or a quick chat with one of our friendly technical staff.
(Toll-Free available in the US and Australia only)
Installation Guide
Contents Technical Specifications
Introduction
Your package comes with
Connect the Camera to your monitoring device
Connect the Camera to your monitoring device (continued)
Important Information about this product
Tips for using your Swann Security Camera
Tips for locating your camera
Technical Specifications
Help Desk / Support Details
Warranty Information
2
2
2
2
3
3
4
4
5
5
5
5
6
6
7
7
Back Cover
Back Cover
Back Cover
Back Cover
Introduction
The Twin Value Pack Camera is a versatile security camera that produces a quality color image in
daylight and by using the black & white image in the dark. This gives you the
fitted Infra-Red LEDs a
capability of viewing the images produced under most lighting conditions, even at night. It can be used to
provide your home or office with a clear picture that can be easily displayed on a DVR, TV, VCR or
Security Monitor.
The Twin Value Pack Camera is designed for best performance when used with Swann DVRs and Security
Monitors, but will just as easily work with your existing CCTV Equipment, TV, VCR or a Computer with a
video capture card. The camera can be used indoors or in a weatherproof enclosure outdoors. The Twin
Value Pack Camera can be used for a variety of purposes including monitoring callers at the door or
keeping your car, yard, shop or children’s play area under observation or even watching your baby while it
sleeps.
Your package comes with…
• 2 x Twin Value Pack Cameras
• 2 x Power Adapters (design may vary from depending on country)
• Security Stickers
• This Instruction Sheet
If any of these items are missing, please contact your retailer.
INSTALLATION
FCC NOTICE
This device co mp li es w ith Part 15 of FCC Rules.
Operation is sub je ct t o the following conditi on s:
(1) This device ma y no t ca use harmful interfere nc e, a nd
(2) this device mu st a cc ept any interference re ce iv ed,
including in te rf er ence that may cause undes ir ed o peration
2 7
Image Sensor: 1/3”(8.5mm) Color CMOS
Picture Elements: PAL - 628 (H) x 582 (V), NTSC - 510 (H) x 492 (V)
Video System*: NTSC - In countries using the NTSC TV standard
PAL - In countries using the PAL TV standard
Horizontal Resolution: 380 TV Lines
Lens details:* DTS ~ 6¼ft (2m) - 3.6mm Lens
DTS ~ 10ft (3m) - 6mm Lens
DTS ~ 18ft (5.5m) - 12mm Lens
S/N Ratio: > 40db
Minimum Illumination: < 3 Lux (Color), 0 Lux (B&W) @ F1.2
IR Effective Range: 12 - 15ft (4 - 5m)
Electronic Shutter: Auto 1/60 ~ 1/15,000sec
Video Output: 1.0v (P-P) @ 75 ohm
Power Supply: 12volts DC
Operating Current: 500mA
Video Cable Connector: RCA Female
Housing Material: Aluminium Alloy
Dimensions: 1¾” (L) x 2” (W) x 2¾” (H) / (45mm x 50mm x 70mm)
Operating Environment: 14°F ~ 104°F (-10°C ~ 40°C)
Weight: ¼lb (105g)
*DTS: Refers to the ideal” Distance to Subject” for a given lens based on a 6ft (2m) object filling the screen of a standard TV
from top to bottom at the indicated distance with the camera mounted 3ft (1m) above the ground.
*Please note that this camera ships in the appropriate TV/Video system for the country of sale. In countries using the NTSC
TV standard the camera will be built to the NTSC standard, and in countries using the PAL TV standard, the camera will be
built to the PAL standard. The camera cannot be switched from one standard to the other.
FCC Notice
We, Swann Communications of 10612 Shoemaker Avenue, Bldg A, Santa Fe Springs, CA 90670 USA, declare under our sole
responsibility that the product:
SW-P-HSK
This product meets the requirements specified in Part 15 of FCC Regulation. Operation rests with the following two
conditions:
(1) The equipment should not cause any harmful interference;
(2) The equipment must receive and process any interference, including any possible interference caused by operation
mistakes. After testing the product, we confirm that it complies with the provision for class C digital equipment in the 15th
part in FCC regulation; and the receiver complies with the limitations for class B digital equipment in Part 15 of FCC
regulation. The product generates, applies and emits radio waves. It might cause harmful interferences to wireless
communication if not be installed and used following the description of the manual. The product may cause interference in
residential area, and the customer should take remedies to eliminate the interference at their own costs. If the product
causes any harmful interference to wireless equipment or disturbs the receiving of TV signals (it can be identified by turning on
and off the product), you can solve the trouble by following methods:
(1) Re-adjust the product or put it in another place;
(2) Extend the distance between the equipment interfered and the product; and
(3) Refer to dealers or experienced radio electrician for help.
CE Notice
This product complies with standards including Low Voltage Device Directive 73/23/EEC; EMC Directive 89/336/EEC and
R&TTE Directive 1999/5/EC. It passed the subject tests by the authority concerned and is authorized to bear CE mark.
Tips for locating your camera Connect the Camera to your monitoring device
You should position your cameras to cover the areas most exposed to risk. See
our suggestions below for some ideas:
Take note that the Twin Value Camera will require a waterproof housing to
protect it from the elements if used outdoors. Direct exposure to the effects of
the weather will void the warranty.
1. Doorways
2. Windows 3. Car Parks
4. Verandahs
Use the diagram over the page as a guide during installation of the cameras.
Step 1: At the end of your Twin Value Pack Camera cable you will find three colored plugs:
•Yellow (Video RCA)
•Red (Audio RCA)
•Black
Step 2: Plug the yellow RCA plug (1) into the "Video In" input (3) (usually located at the back
of your TV or VCR).
Step 3: Plug the Red RCA plug (2) into the "Audio In" input (4) (usually located at the back of
your TV or VCR).
Step 4: Connect the black plug (5) at the end of your Twin Value Pack into the black plug at the
end of the power adaptor (6).
Step 5: Plug the power adaptor (6) into the mains power point in your wall.
Step 6: If you have an AV TV with RCA sockets you will need to switch the TV to the AV
channel on your TV to view the camera. To connect the Twin Value Pack Camera to your
VCR, you will need to turn the VCR to the AV Input selection and turn your TV onto
the channel you would normally use to view a tape or movie on your VCR. The AV
Channel on your TV or VCR may be activated by a button on your remote that is marked
with this symbol , or L1 or L2 or possibly AV1 or AV2.
5. Reception
areas
Where to Place The Security Stickers:
1. On your front window
2. On side windows
3. Near entrance points - doors, gates
4. Next to a dummy camera mounted outside
5. On the front counter
6. On the cash register
7. Next to an obvious camera
6
6. Cash
register
7. Mix
dummies
& real
cameras
Design of sticker subject to
change without notice.
8. Under eaves
Note: Please read the instructions for your VCR or TV for more information on using their
AV inputs.
Step 7: If the picture is not clear, you will need to undo the small grub screw that locks the lens in
place, which is located on the side of the barrel that the lens screws in to. Focus the
camera by turning the lens in a clockwise or anti-clockwise direction until the image
is clear, then re-tighten the small grub screw.
3
Connect the Camera to your monitoring device (continued) Important Information about this product
SETTING UP YOUR SYSTEM
Your Twin Value Pack Camera is designed to transmit high quality color images during the day and black
& white images at night to your Security Monitoring Device, Television or VCR and is operated by mains
power. To help guide you through the process of setting up the Camera, we have outlined the steps and
numbered each of the components required in the diagram below.
Basic Connection to VCR, TV or MONITOR
VCR, TV or MONITOR
6
LIGHT SENSOR
POWER
ADAPTOR
CAMERA
MICROPHONE
IR LEDs
! Please test all devices before final installation as it is far easier to rectify problems at this stage.
! To avoid the risk of damage to your product, use only the supplied power adaptors.
Best Results are achieved when the camera is looking down on the subject area.
!
The camera hood should be positioned to stop sunlight entering the lens and causing the picture to
!
wash out during bright daylight.
! Areas with a bright background may cause degradation of the image. If possible, position
your camera so that it doesn’t point towards a very bright light source.
! Do not cut the DC power cable of the Camera to fit with another power source. This may result
in damage to the Camera & any unauthorised modifications will void your warranty.
! The Twin Value Pack Camera is not water or weatherproof and requires a suitable protective
enclosure if it is to be situated in an outdoor location.
VIDEO IN
V
I
D
E
I
D O
O
U
A
O
U
T
N
I
V
I E
D
A
O
U
D
I
O
3 4
Red
2
1
YELLOW
5
BLACK
AUDIO IN
Connection to VCR, TV or MONITOR using an extension cable
*
CAMERA
Black
5
Red
2
Yellow
1
VCR, TV or MONITOR
V
I
D
E
O
I
D
O
U
A
O
U
T
N
I
V
I
D
E
A
O
U
D
I
O
VIDEO IN
3 4
AUDIO IN
6
POWER
ADAPTOR
MICROPHONE
IR LEDs
LIGHT SENSOR
RCA Extension cable
(Not Included)
* RCA Female to RCA Female gender changers are included
* RCA Female to RCA Female gender changers are included
in all Swann RCA extension cable packs.
in all Swann RCA extension cable packs.
If you are mounting the camera permanently it is recommended that you use the Swann Security
Camera Extension cables with RCA adaptors such as the 120ft AV Cable (Product code SW-P-36M)
or the 60ft AV Cable (Product Code SW-AVCABLE) Check the Swann website for information on
other Swann cable and accessory products or see your local electrical store for more information on what
cables and accessories are available in their range to suit Security Cameras with RCA video connectors.
Tips for using your Swann Security camera
1. Deterrence is the best and most cost effective security method for:
- preventing criminal activity before it occurs is preferable to, and cheaper than, cleaning
up after it occurs
- the Twin Value Pack Camera is an example of cost effective security utilizing
the 'art of deterrence' to outsmart thieves and criminals
2. Always place cameras high enough that they can't be closely inspected or easily accessed
3. Position cameras and dummies where they can be easily seen for maximum deterrence
4. Position a monitor where it can be seen but not touched
5. If you have more than one camera use a monitor with channel switching function, a Quad
Processor or DVR with multiple views to show potential offenders the level of coverage you have
protecting your site.
6. Add extra Swann dummy cameras to give the impression of heightened security
7. Purchase a Swann DVR (product code SW-R-DVR4NET) to monitor and record activity on your
cameras. Depending on the settings used, DVRs can record for months.
8. Position a VCR with tapes or boxes close to your monitor for added effect, implying there is a
security video recorder even if there isn't one
4
5
Loading...