Swann SWPRO-1080PTZ Instruction Manual
Pan-Tilt-Zoom
Security Camera
For use with Swann Pro-Series 1080p DVRs
EN
INSTRUCTION MANUAL
Security Made Smarter
M1080PTZVER1E | © Swann 2017
Step One - Introduction
Important instructions
1. Make sure the camera is securely fastened.
2. Do not operate if wires and terminals are exposed.
3. Only use the supplied power adapter (24V).
4. Do not manually move the camera when it is turned
on as this may damage the internal mechanism.
5. Use a small Phillips-head screwdriver to connect
the red and black PTZ wires on the camera, to the
PTZ connection on the video & power cable.
6. This camera is compatible with most Swann Pro-
Series 1080p DVRs.
Important note: All jurisdictions have specific laws
relating to the use of cameras. Before using any camera for any purpose, it is the buyer’s responsibility to
be aware of all applicable laws and regulations that
prohibit or limit the use of cameras.
VGA 12V INVIDEO IN
AUDIO
OUT
LAN&USB
785
6
341
2
AUDIO IN
B A
PTZ
If your DVR has a green PTZ connection (as shown
above), go to step two for instructions.
If your DVR has a green and orange PTZ connection
(as shown above), go to step three for instructions.
LANLAN
VGAVGA
7 5 3 1
8 6 4 2
AUDIO
OUTPUT
AUDIO
OUTPUT
AUDIO
INPUT
AUDIO
INPUT
3 1
4 2
12V12V
RS485RS485
VIDEO INPUTVIDEO INPUT
The camera has an on-screen display that can
be accessed using the PTZ controls on your DVR.
For an explanation about the functions available,
download the instruction manual from support.
swann.com. Search for – 1080 PTZ OSD Manual.
Step Two - Connecting the Camera
Power Input
Video Output
1
Red
Black
21
3
Power Adapter
4
Power Input
Video Output
Video Input
Power Output
PTZ
Video & Power Cable
PTZ
VGA 12V INVIDEO IN
AUDIO
OUT
LAN&USB
7
8
5
6
3
4
1
2
AUDIO IN
B A
PTZ
2 3
Red
Black
Loading...