Swann SwannOne SoundView SWO-SV02K Quick Start Manual
Get Started in Four Easy Steps
At a Glance
Questions? Get more information regarding the setup and use of your
SwannOne products on the web at swannone.com, or simply email us at
support@swannone.com.
Thank you for choosing the SwannOne™ SoundView Outdoor Camera. Please take a
moment to familiarize yourself with key areas of the camera.
QHSVC02K260914E
© Swann Communications 2015
EN
Quick Start Guide
Read me first
SwannOne Warranty
Your SwannOne products are backed by a full 12 month guarantee from the date of purchase. In the
unlikely event of anything going wrong, you can have confidence that your purchase is protected.
Refer to swannone.com for terms and conditions.
SoundView
Outdoor Camera
www.swannone.com
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1)This device may not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired operation.
Sunshield
for protecting
lens against
direct sunlight
Antenna Connector
Reset Button
(To reset camera, unplu g
power, then depress
button while reconnecting
power. Release button
after 10 seconds.)
Microphone
Light Sensor for
night detection
Adjustable Knob
for orientating
camera view
Infrared LEDs
for night vision
Connect
Ethernet Cable
Attach
Antenna
Power Camera
Register Camera
1
2
3 4
The Ethernet cable is only required for initial setup. Configure the camera to
connect to your Wi-Fi network directly during registration, then go wireless.
Attach Antenna Connect Ethernet Cable Power Camera
Screw the Wi-Fi antenna onto the antenna connector. For best
reception, leave the antenna in a vertical position.
1 2 3
Power Adapter
(Your adapter may look
different, depend ing on
your location)
Connect the camera directly to your broadband router using the
included Ethernet cable.
Plug the camera into a wall outlet using the included power adapter.
Ethernet Cable
Ethernet Port
Antenna Connector
Wi-Fi Antenna
Power
Connector
Register Camera
4
Creating a SwannOne Account
Before you can register the camera, you will need to create a SwannOne
account. Your SwannOne account is what you use to control and manage all
your SwannOne devices and services from anywhere.
Go to home.swannone.com from your PC, Mac, smartphone or tablet, and
sign up for a SwannOne account.
Installing the Camera
Log in to your new SwannOne account at home.
swannone.com and then follow the on-screen
instructions to add the camera to your SwannOne
account.
Once registration is complete, stay connected
to your SwannOne camera wherever* you are by
downloading the SwannOne app on your smartphone
from the Apple App Store or Google Play.
Broadband Router
Broadband Router
* Internet connection required
Loading...