w
25
Hanger Webcam
SW385-WH5
www.swannsecurity.com
SW385-WH5-60010-290909
Platinum Series
Before you Begin
Package Contents
FCC Verification:
NOTE: This equipment has been tested and found to comply with the limits for
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna
· Increase the separation between the equipment and the receiver
· Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected
· Consult the dealer or an experienced radio/TV technician for help
W-25 Webcam•
Software CD-ROM•
Operating Instruction• s
Technical Specifications
Image Sensor 1/4” Color CMOS
Max. Resolution 2560 x 1920 (5 Mega Pixels)
Video Format 24-bit RGB / YUY2
Frame Rate 30fps @ 640 x 480
15fps @ 1600 x 1200
Focus Range 5cm - ∞
White Balance Automatic
Microphone Yes
Audio Range 9ft / 3m
Dimensions 110mm x 75mm x 40mm
4.3” x 3.0” x 1.6”
Weight 110g / 2oz
Minimum System Requirements
Interface Type USB 2.0
Processor Pentium IV or above
RAM 1GB or greater
Video Card Intel 945 or greater
Hard Drive Space Minimum 1GB free
Operating System(s)
Microsoft® Windows® XP
Microsoft® Windows® Vista
Microsoft® Windows® 7
Mac® OS X® 10.x*
*Cyberlink software not compatible with Mac.
Windows is a trademark of Microsoft Corporation in the United States and other countries.
Mac is a registered trademark in the United States and other countries.
Included Software
Connection Guide
For best results, install the software on the included CD-ROM before
connecting the W-25 to your computer.
Locate a free USB 2.0 port on your computer.•
Attach the W-25’s USB plug directly to the free USB 2.0 port.•
Do not use a USB hub, nor a USB extension cable, as these can interfere with •
the webcam’s connection to your computer, and compromise performance.
If you’re running a compatible operating system (see opposite), the W-15 will •
automatically be detected and drivers will be installed. A popup dialog box will
alert you once drivers have been installed.
There is no need to restart your computer if you connect/disconnect the W-15 •
webcam. Like most USB devices, it supports “hot-swapping”.
To physically mount the W-25 Webcam, use the base folded down as a stand, •
or fold the base and use it as a clamp to attach the W-25 to your LCD screen
or notebook display.
Placement Tips
Where you put the W-25 is really up to you, but here are a couple of suggestions.
The W-25 will automatically adjust exposure levels (that is, how bright •
everything in the image appears to be) unless manually overridden. Thus, if
you’re sitting in front of a bright light source (such as a window) and you are
in shadow, the difference in brightness might cause you to ‘under expose’ and
appear only as a silhouette. We suggest trying to keep everything the camera
sees evenly lit.
Any camera generally gives better results being set up higher than the subject •
and looking down, rather then looking up at it. This is particularly true of faces
- it’s not so attering seeing up one’s nose! Thus, we suggest mounting the
W-25 level with yourself or slightly above.
We’ve included all the software you’ll need to run the W-25 on the included
CD-ROM. Please note that the included software requires a Microsoft
Windows operating system - see Technical Specications opposite.
Installation
Insert the CD-ROM.•
If the program does not run automatically, then open the CD-ROM drive in •
Windows Explorer, and double-click “autorun.exe”.
Select your desired language.•
Follow subsequent instructions on screen.•
Support documentation for the software is available on the CD-ROM.•
Please note: The included software is created, licensed and supported by Cyberlink, a leading video software application group. If you
require any support or further assistance, visit Cyberlink’s web site, located at www.cyberlink.com
© Swann Communications 2009
Swann Communications warrants this product against defects in workmanship and material
for a period of one (1) year from it’s original purchase date. You must present your receipt
as proof of date of purchase for warranty validation. Any unit which proves defective during
the stated period will be repaired without charge for parts or labour or replaced at the sole
discretion of Swann. The end user is responsible for all freight charges incurred to send the
product to Swann’s repair centres. The end user is responsible for all shipping costs incurred
when shipping from and to any country other than the country of origin.
The warranty does not cover any incidental, accidental or consequential damages arising
from the use of or the inability to use this product. Any costs associated with the fitting or
removal of this product by a tradesman or other person or any other costs associated with
its use are the responsibility of the end user. This warranty applies to the original purchaser
of the product only and is not transferable to any third party. Unauthorized end user or
third party modifications to any component or evidence of misuse or abuse of the device will
render all warranties void.
By law some countries do not allow limitations on certain exclusions in this warranty. Where
applicable by local laws, regulations and legal rights will take precedence.
Swann Communications USA Inc.
12636 Clark Street
Santa Fe Springs CA 90670
USA
Swann Communications PTY. LTD.
Building 4, 650 Church Street,
Richmond, Victoria 3121
Australia
Swann Technical Support
All Countries E-mail: tech@swannsecurity.com
Telephone Helpdesk
See http://www.worldtimeserver.com for information on time zones and the
current time in Melbourne, Australia compared to your local time.
USA toll free
1-800-627-2799
(Su, 2pm-10pm US PT)
(M-Th, 6am-10pm US PT)
(F 6am-2pm US PT)
USA Exchange & Repairs
1-800-627-2799 (Option 1)
(M-F, 9am-5pm US PT)
AUSTRALIA toll free
1300 138 324
(M 9am-5pm AUS ET)
(Tu-F 1am-5pm AUS ET)
(Sa 1am-9am AUS ET)
NEW ZEALAND toll free
0800 479 266
INTERNATIONAL
+61 3 8412 4610
Warranty Information
Help Desk & Technical Support
Loading...