Swann SW234-PC2, SW234-PCG, SW361-PD2, SW361-PD4 Operating Instructions Manual
Advanced security made easy™
plug&playsecurity
PenCam Recorder
Mini Video Camera & Recorder
Operating Instructions
SW234-PC2 / SW234-PCG /
SW361-PD2 / SW361-PD4
www.swannsecurity.com
MPD2200710E
1
222
Before You Begin
FCC Verification:
NOTE: This equipment has been tested and found to comply with the limits for Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
· Reorient or relocate the receiving antenna
· Increase the separation between the equipment and the receiver
· Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
· Consult the dealer or an experienced radio/TV technician for help
IMPORTANT: Prohibition against eavesdropping.
Except for the operations of law enforcement officers conducted under lawful authority, no person
shall use, either directly or indirectly, a device operated pursuant to the provisions of this Part for the
purpose of overhearing or recording the private conversations of others unless such use is authorized
by all of the parties engaging in the conversation.
WARNING: Modifications not approved by the party responsible for compliance could void user’s authority to operate the equipment.
IMPORTANT SAFETY INSTRUCTIONS:
· Make sure product is fixed correctly and stable if fastened in place
· Do not operate if wires and terminals are exposed
Package Contents
PenCam Recorder - 4GB* (SW234-PCG, SW361-PD4)
- 2GB* (SW234-PC2, SW361-PD2)
Operating Instructions
#
Ink Refill
Software CD-ROM
PenCam Layout
Top of PenCam
USB Connection
* Available in Gold or Silver
#
The PenCam is already preloaded with an ink cartridge.
There is no need to change the
cartridge unless the pen is out
of ink.
Bottom of PenCam
3
PenCam Layout (cont)
ON/OFF/Record button
Hidden
Camera
Hidden USB Port Twist to reveal
Blue / Orange
Status LED
Reset Button
Working Pen Tip
Turning the PenCam On
1. Press the button (on top off the pen) and hold until the both the orange and blue light turn on
then release it.
2. When the camera is ready to use the orange standby light will stay on and the blue light will turn
off (the orange light will blink when it is on standby in picture mode or stay lit when it is on standby
in video mode)
Turning the PenCam Off
1. With the PenCam on standby press and hold the button until the orange light turns off.
2. The PenCam will not switch off if you do this while the PenCam is in Video mode and recording.
3. If the PenCam is recording you must press the button once to set it on standby (static orange light)
then press and hold the button until the orange light turns off.
Press & hold the button to turn
the PenCam on. Release when
the blue / orange light appears
Loading...