
8. Warranty Information
Swann Communications warrants this product 
against defects in workmanship and materials for a 
period of one (1) year from the original purchase 
date. You must present your receipt as proof of 
date of purchase for warranty validation. 
Any unit which proves defective during the stated 
period will be repaired without charge for parts 
or labour or replacement at the sole discretion of 
Swann. The repair or replacement will be warranted for either ninety days or the remainder of 
the original one year warranty period, whichever is 
longer. 
The end user is responsible for all freight charges 
incurred to send the product to Swann’s repair 
centers. The end user is responsible for all shipping costs incurred when shipping to and from any 
country other than the country of origin. 
The warranty does not cover any incidental, accidental or consequential damages arising from the 
use of or the inability to use this product. 
Any costs associated with the fitting or removal of 
this product. Any costs associated with the fitting 
or removal of this product by a tradesman or other 
person or any other costs associated with its use 
are the responsibility of the end user. 
This warranty applies to the original purchaser 
of the product only and is not transferable to any 
third party.
Unauthorized end user or third party modifications 
to any component or evidence of misuse or abuse 
of the device will render all warranties void.
STOP
has the answers
If this product does not work when you first plug 
it in or you have any concerns, don’t take it back 
to the store!
Use the Installation Guide / Manual in the pack, or
Visit www.swannsecurity.com/help 
for FAQs, troubleshooting hints & more, or
  Contact our expert Tech Support Team... 
  Email - tech@swannsecurity.com
  United States  1-800-627-2799 
      1-877-274-3695 
  Sun 4pm-12am, Mon-Fri 8am-12am (PDT)*
  Australia  1300 138 324 
  Mon 9am-5pm, Tues-Fri 1am-5pm (AET) 
    Sat 1am-9am
  New Zealand   0800 479 266 
  Mon 11am-7pm, Tues-Fri 3am - 7pm 
    Sat 3am-11am (NZDT)
  International  +61 3 8412 4610    
  Mon 9am-5pm, Tues-Sat 1am-9am (AET) 
  *Hours vary during daylight savings times
FCC WARNING STATEMENT:
This device complies with Part 15 of FCC Rules. Operation is 
subject to the following two conditions: 
(1) This device may not cause harmful interference, and 
(2) This device must accept any interference received, including 
interference that may cause undesired operation
NOTE: All jurisdictions have specific laws and regulations relating 
to the use of cameras. Before using any camera for any purpose it 
is the buyer’s responsibility to be aware of all applicable laws and 
regulations that prohibit or limit the use of cameras and to comply 
with the applicable laws and regulations.
Theft Deterrent Kit / Anti-Shoplifting Kit
Quick Start Guide
SW276-ASL / SW276-RSL / SW276-TSL
www.swannsecurity.com
110408EN
 

1. Package Contents
3 or 4 x MaxiBrite Imitation Camera 
3 or 4 x MaxiBrite Stand 
4 x Small Security Sticker 
Large Security Sticker Sign 
4 x Imitation Dome Cameras 
Mounting Hardware 
Quick Start Guide
2. Attaching Camera Stands
3. Adjusting Camera Angle
Turn the knob to loosen 
the stand and camera and 
turn again to tighten
4. Affixing Cameras
1. Find an appropriate 
location to mount camera
2. Detach stand from 
camera
3. Use provided scews to 
fix stand to surface
4. Re-attach camera to 
stand and adjust angle
6. Placing Cameras
Place cameras near entry points such as front or 
rear doors, garage etc. Place under eaves and aim 
towards the garage or down the driveway
Screw the stand into the 
camera and twist clockwise 
to tighten
The camera stand can also be 
fixed to the top of the camera 
for more versatile applications
Swann Communications • Toll Free Technical Support: USA - 1-800-627-2799, 1-877-274-3695, Australia - 1300 13 8324 • Email: tech@swann.com.au
5. Affixing Imitation Dome Cameras
1. Find an appropriate 
location to mount camera
2. Clean surface when 
dome will be applied
3. Peel back double-sided 
adhesive
4. Carefully place rim on 
surface and hold for 30s
7. Where to Place Security Stickers
1. In front windows
2. On side windows
3. On gates/doors
4. Near an obvious camera
5. On shed doors
6. Near cash registers
7. In warehouse
8. In parking lot
www.swannsecurity.com