Swann SW242-LPN, SW242-LP4 User Manual
DVR4-1100™
4CH Digital Video Recorder
SW242-LP4 / SW242-LPN
U
U
s
s
e
err
M
M
a
a
n
n
u
u
a
all
INDEX
1. DVR Features....................................................................... 1
2. Layout
2.1
Front Panel...............................................................................................1
2.2 Rear Panel................................................................................................ 2
2.3
Remote Controller............................................................................... 2
3. Installation
3.1 Installing Hard Drive..........................................................................3
3.2 Connecting Camera and Monitor................................................. 3
3.3 Connecting Power Supply…………………………..…..3
4. System Boot
4.1
Detecting Installed Hard Drive.....................................................4
4.2 Recovering Lost Data........................................................................4
4.3 Restore Recording Feature.............................................................. 4
4.4 Main Screen............................................................................................5
5. DVR Setup
5.1
Setup Menu............................................................................................. 5
5.2 Camera Select........................................................................................ 6
5.3 Record Select.........................................................................................6
5.4 Resolution................................................................................................7
5.5 Record Frame.........................................................................................7
5.6 Record Quality ......................................................................................8
5.7 Schedule Set............................................................................................8
5.8 Miscellaneous Menu - Auto Record................................9
5.9 Miscellaneous Menu - Password Enable......................... 9
5.10 Miscellaneous Menu - Password Change ....................... 9
5.11 Miscellaneous Menu - Color Set..................................... 9
5.12 Miscellaneous Menu - Time Set.................................... 10
5.13
Hard Disk Set.......................................................................................10
5.14
Motion Set..............................................................................................11
5.15 Video Mode...........................................................................................12
5.16 Factory Reset........................................................................................12
6. Recording
6.1 Start Recording....................................................................................12
6.2 Stop Recording....................................................................................13
6.3 Recording Time on Hard Drive..................................................13
7. Playback.............................................................................. 14
8. USB Programming............................................................. 15
8.1 PC Viewer Program........................................................ 15
8.2 Program Buttons ............................................................ 15
8.3 PC Backup
...............................................................................................16
9. Specifications...................................................................... 17
10. Appendix
10.1 System Connection Diagram......................................... 18
10.2 DVR Accessories (included)......................................... 18
- 1 -
User’s Manual
z 4 Channel BNC Camera Input
z 1 Channel BNC Video Output
z Video Source Option: NTSC / PAL
z Motion Detection with Sensitivity and Area Settings
z Time Schedule Recording / Motion Triggered Recording
z One ATA-100 Hard Disk Interface
z USB 2.0 Back up to computer
z With Remote Control & Removable Hard Drive Tray
2.1 Front Panel
CH1
Channel #1
Stop
Stop recording / playing back
CH2
Channel #2
REC
Record
CH3
Channel #3
Menu/Esc
Enter / exit setup menu
CH4
Channel #4
SEL/Edit
Select / modify item
Quad
Quad View
Up
Move up / left cursor
REW
Rewind
Down
Move down / right cursor
Pause
Pause
PWR
Power indicator
Play
Play recorded video
HDD
Hard disk drive indicator
FWD
Forward
Chapter 1: DVR Features
Chapter 2: Layout
Removable HDD Tray
HDD Lock
IR Receiver
- 2 -
User’s Manual
2.2 Rear Panel
USB Port is located on the right side of the case.
2.3 Remote Controller
CH1 Select or enlarge Channel #1
CH2 Select or enlarge Channel #2
CH3 Select or enlarge Channel #3
CH4 Select or enlarge Channel #4
Quad Quad View
Rewind
Play recording list
Forward
Record
Pause
Stop recording / playing back
Menu Enter or exit setup menu
Move up / left cursor
SEL Select / modify item
Move down / right cursor
Power Supply Input
Grounding Terminal
4 BNC video inputs
1 BNC video output
Fan
- 3 -
User’s Manual
3.1 Installing Hard Drive
1. Unplug the power supply. Don’t install or uninstall HDD when DVR is on!!
2. Slide the HDD tray out of DVR body carefully.
3. Connect the power cord and data cable to hard disk drive.
Make sure the HDD is set to be MASTER according to the hard drive manual.
The 4 pin connection is the DC power cable for HDD, and the wider cable is the standard
hard drive IDE type connection.
4. Insert the HDD tray into DVR body tightly.
5. Lock the HDD tray.
Lock the caddy by turning the key clockwise.
If you need to unlock the tray, turn the key anti-clockwise.
CAUTION:
1. If you do NOT lock the HDD tray, the DVR system might not function properly.
2. Do not remove the HDD tray while the DVR is on!
3.2 Connecting Camera and Monitor
There are 4 camera inputs and 1 video output with BNC connectors (Refer to
2.2 Rear Panel).
3.3 Connecting Power Supply
Please only use the power adapter supplied with the DVR. The standard power
supplied to the DVR is DC 12 Voltage, 3 Amperes.
Chapter 3: Installation
- 4 -
User’s Manual
4.1 Detecting Installed Hard Drive
4.2 Recovering Lost Data
4.3 Restore Recording Feature
After connecting the power, the system
will boot-up and detect the installed hard
drive.
On the screen it will show the hard drive
information.
A power error can cause data to be lost,
and the DVR system will automatically
recover lost data after power is reconnected.
If a power error occurs during
recording process, the system will
automatically resume recording after
power is reconnected.
Chapter 4: System Boot
Checking HDD ……
MASTER…
RECOVER HDD?
04811-101735
(SELECT)YES/(MENU)NO
Power Error Detected
Restore Hard Disk (Master) OK
Restore REC Mode…………
OK
Loading...