Swann SU3021, SU3022 Instruction Manual
INSTRUCTION MANUAL
Model: SU3021
GUARANTEE
This product is guaranteed for 2 years from the date of original purchase.
If any defect arises due to faulty materials or workmanship, the unit will,
either be repaired, replaced or refunded at our discretion.
The following conditions apply:
The product must be returned to the retailer with original proof of
purchase.
The product must be installed and used in accordance with the
instructions contained in this user instruction guide.
It must be used only for domestic purposes.
It does not cover wear and tear, damage, misuse or consumable
parts.
The supplier has no responsibility for incidental or consequential
loss or damage.
Valid in the UK & Eire only.
Valid only if purchased from the
SDHS Group.
Technical Specification:
Power supply: 220V-240V AC. 50Hz
Power Consumption: 1800 Watts Max
Model number: SU3021
Protection: Class II
SDHS Group
L70 1AB
Box MPRC 8
Swan Vacuum Helpline. Please Call 01733 404703
Swan Vacuum Spare Parts. Please Call 01733 404709
Calling from outside the UK please call - 00 44 1733 404703
1
IMPORTANT SAFETY INSTRUCTIONS
When using your Cyclonic Upright Vacuum, the following basic safety precautions
should be observed:
1. Never vacuum wet surfaces, pick up wet objects or use in wet conditions.
2. Always disconnect the vacuum from the electrical supply before attempting any
maintenance.
3. Do not vacuum anything that is burning or smoking, such as cigarettes, matches, or hot
ashes.
4. Do not use the vacuum to pick-up large objects that could, damage or cause a
blockage.
5. Do not use the vacuum to pick up builders rubble, sand, plaster dust etc.
6. This vacuum cleaner is for domestic use only. Industrial or commercial use invalidates
the warranty.
7. Do not let children use the vacuum cleaner unattended.
8. Do not use without a dust bag/bin and filter in place.
9. Use extra care when cleaning on stairs.
10. Always ensure the vacuum height setting is set in the tools position when using on
stairs. Take extra care not to allow the vacuum to tilt and the beater bar make contact
with the carpet whilst using the tools on the stairs.
11. Keep hair, loose clothing, fingers and all parts of the body away from openings and
moving parts.
Safety Alerts:
To reduce the risk of fire, electric shock, or injury
1. Do not leave the vacuum unattended when plugged in, unplug from the outlet when not
in use and before servicing.
2. To reduce the risk of electric shock, do not use outdoors or on wet surfaces.
3. Use only as described in this manual.
4. Do not use with a damaged cord or plug.
5. Do not run the vacuum cleaner over the cord. Keep the cord away from heated
surfaces.
6. Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord.
7. Do not handle the plug or the vacuum cleaner with wet hands.
8. Turn off all controls before unplugging.
2
Electrical Safety
Before switching on, make sure that the voltage of your electricity supply is the same as that
indicated on the rating plate. This product is designed to operate on 220 – 240V AC; 50Hz.
Connection to any other power source may damage the unit.
This product may be fitted with a non – rewireable plug. If it is necessary to change the fuse
in the plug, the fuse cover must be refitted. If the fuse cover becomes lost or damaged, the
plug must not be used until a suitable replacement obtained.
If the plug has to be changed because it is not suitable for your socket, or becomes
damaged in any way, it should be cut off and an appropriate plug fitted following the wiring
instructions below. This should be carried out by a qualified electrician. The plug removed
must be disposed of safely, as insertion into a 13 Amp socket is likely to cause an electrical
hazard.
IMPORTANT – THIS IS A CLASS II APPLIANCE AND DOES NOT REQUIRE
AN EARTH CONNECTION.
Wiring Instructions
The wires in this mains lead are colored in accordance with the following code:
Blue = Neutral Brown = Live
As the colours of the wires in the mains lead of this appliance may not correspond with the
coloured markings identifying the terminals in your plug, proceed as follows (refer to the
plug wiring diagram).
y
The wire which is coloured BLUE must be connected to the terminal which is marked
with the letter N or coloured Black.
y
The wire which is coloured BROWN must be connected to the terminal which is marked
with the letter L or coloured Red.
If a 13Amp (BS1363) plug is used, a 13Amp (BS1362) fuse must be fitted, or if any other
type of plug is used, a 13Amp fuse must be fitted, either in the plug or adaptor, or on the
Distribution Board.
3
GETTING TO KNOW YOUR BAGLESS CYCLONIC UPRIGHT
8
7
12
16
17
1
2
3
4
5 9
10
13
15 14
12
13
17
18
11
8
20
19
6
11
11. Furniture Guard
12. Crevice tool
13. Handle Release
14. Small brush
15. Upholstery tool
16. Extension tube (x2)
17. Hose connector
18. HEPA Filter Frame
19. Blockage inspection door
20. Exhaust filter grill
1. Upper Handle
2. On/Off Switch
3. Accessory Cover Release
4. Dust tank release
5. Dust tank
6. Carpet Height Adjustment Knob
7. Main body
8. Flexible Hose
9. Quick Release Power Cord Holder
10. Power cord
4
Loading...