Swann SR11010, SR11020 Installation And User Manual

Installation and User Guide

For model: SR11010 (all colours)

Swan Service Helpline

0845 610 4118

Retro Topmount

Refrigerator

SR11010.indd 1 21/07/2014 10:42

22

Important Safeguards

• Do not connect your appliance
to the electricity supply until all

packing and transit protectors
have been removed.

• Leave to stand upright for at

least 4 hours before switching on
to allow compressor oil to settle

• This fridge/freezer must only be

used for its intended purpose i.e

the storing and freezing of edible

foodstuff.

• Do not dispose of the appliance

on a fire. Your appliance

contains non CFC/HFC natural
substances in the cooling system

and in the insulation, which are

potentially flammable if exposed

to fire. Therefore, take care not
to damage, the cooling circuit
or pipes of the appliance in
transportation and in use. In

case of damage do not expose

the appliance to fire or potential

ignition source and immediately

ventilate the room where the
appliance is situated.

• We suggest you contact your
local authority for disposal

information and facilities available.

• See installation section for

information on suitable location.

• On delivery, check to make

sure that the product is not
damaged and that all the parts
and accessories are in perfect
condition.

• Ensure that the plug remains
readily accessible. Do not use
multiple adaptor or extension

cables
.

• Failure to observe these
instructions may invalidate your

right to free service during the
guarantee period.

• Keep ventilation openings, in the

appliance enclosure or in the built­in structure, clear of obstruction.

WARNING: Keep ventilation

openings, in the appliance
enclosure or in the built-in
structure, clear of obstruction.

WARNING: Do not use

mechanical devices or other

SR11010.indd 2 21/07/2014 10:42

3

Important Safeguards

means to accelerate the
defrosting
process, other than those

recommended by the

manufacturer.

WARNING: Do not damage the

refrigerant circuit.

WARNING: Do not use electrical

appliances inside the food
storage compartments of the

appliance, unless they are of
the type recommended by the

manufacturer.

• We suggest you keep these

instructions in a safe place for

easy reference.

• This appliance is not intended for
use by persons (including children)
with reduced physical, sensory

or mental capabilities, or lack of

experience and knowledge, unless
they have been given supervision

or instruction concerning use

of the appliance by a person
responsible for their safety.

• If the supply cord is damaged,

it must be replaced by the

manufacturer, its service agent

or similarly qualified persons in
order to avoid a hazard.

• The plug must be accessible

after the installation.

• Children should be supervised
to ensure that they do not play

with the appliance.

CAUTION: In order to avoid
a hazard due to inadvertent

resetting of the thermal cutout,
this appliance must not be

supplied through an external

switching device, such as a
timer, or connected to a circuit

that is regularly switched on and
off by the utility company

This appliance should only
be connected to an earthed,
switched mains socket. Do not
use an extension cord with this
appliance

SR11010.indd 3 21/07/2014 10:42

4

Your Refrigerator

Freezer section

Freezer shelf

Refrigerator shelf

Refrigerator shelf

Wire wine rack

Thermostat & bulb

Vegetable drawer
Salad crisper

Dairy & multipurpose

guards

Dairy &

multipurpose
guards

Dairy &

multipurpose
guards

1. Turn off the refrigerator and disconnect the plug
from the outlet.

2. Using a Phillips screwdriver to remove the bulb lens

3. Remove the old bulb by turning it counterclockwise.

4. Replace a new bulb (10W) clockwise making sure
you have correctly positioned the bulb.

5. Replace the light cover in original location and click
to put in place.

6. Reconnect the refrigerator to the electrical outlet
and switch on.

CHANGING THE BULB

Service label

Drain hole

SR11010.indd 4 21/07/2014 10:42