Get Started in Four Easy Steps
At a Glance
Thank you for choosing the Smart Home Outdoor Camera. Please take a moment to
familiarize yourself with key areas of the camera.
Sunshield
for protecting
lens against
direct sunlight
Antenna Connector
Reset Button
(To reset camera, unplu g
power, then press button
while reconnecti ng power.
Release button af ter 10
seconds.)
Microphone
Light Sensor for
night detection
Adjustable Knob
for orientating
camera view
Infrared LEDs
for night vision
Connect
Ethernet Cable
Attach
Antenna
Power Camera
Register Camera
1
2
3 4
Smart Home
Outdoor Camera
Security Made Smarter
QUICK START GUIDE
EN
© Swann Communications 2018
SMARTHOME-OCAMVER1E
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) This device must accept any interference received, including interference that may cause
undesired operation.
Correct Disposal of this Product
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible
harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse
of material resources. To return your used device, please use the return and collection systems or contact the retailer where the
product was purchased. They can take this product for environment safe recycling.
Limited Warranty Terms & Conditions
Swann Communications warrants this product against defects in workmanship and material for a period of one (1) year from its original
purchase date. You must present your receipt as proof of date of purchase for warranty validation. Any unit which proves defective during the
stated period will be repaired without charge for parts or labour or replaced at the sole discretion of Swann. The end user is responsible for
all freight charges incurred to send the product to Swann’s repair centres. The end user is responsible for all shipping costs incurred when
shipping from and to any country other than the country of origin.
The warranty does not cover any incidental, accidental or consequential damages arising from the use of or the inability to use this product.
Any costs associated with the fitting or removal of this product by a tradesman or other person or any other costs associated with its use are
the responsibility of the end user. This warranty applies to the original purchaser of the product only and is not transferable to any third party.
Unauthorized end user or third party modifications to any component or evidence of misuse or abuse of the device will render all warranties
void. By law some countries do not allow limitations on certain exclusions in this warranty. Where applicable by local laws, regulations and
legal rights will take precedence.
CE marking on this product represents the product is in compliance with all directives that are applicable to it.
Attach Antenna Connect Ethernet Cable Power Camera
Screw the Wi-Fi antenna onto the antenna connector. For best reception,
leave the antenna in a vertical position.
1 2 3
Power Adapter
(Your adapter may look
different, depend ing on
your location)
Connect the camera directly to your internet router using the included
Ethernet cable.
Plug the camera into a wall outlet using the included power adapter.
Ethernet Cable
Ethernet Port
Antenna Connector
Wi-Fi Antenna
Power
Connector
Register Camera
4
Creating a Smart Home Account
Before you can set up your camera, you will need to create a Swann
Smart Home account. Your Swann Smart Home account is what you use
to connect devices and manage your Smart Home system and services.
To sign up for a free account, go to: home.swannone.com.
Setting up your camera
Sign in to the Smart Home portal at home.swannone.com. Then follow
the on-screen instructions to add the camera to your Smart Home account.
Once setup is complete, download the SwannOne app from the Apple App
Store or Google Play. The SwannOne app lets you view live video feed
remotel y using a smartphone or tablet.
Router
TIP The Ethernet cable is only required for initial setup. Configure the camera to connect to
your Wi-Fi network directly during registration then go wireless.
SwannOne
SwannOne
Loading...