Swann SFA1PBA User Manual

designed for life

16 Inch (40cm) Black

Stand Fan

Model: SFA1PBA

v1.1

IMPORTANT INFORMATION - RETAIN FOR FUTURE USE

When using any electrical appliance, basic safety precautions should always be
followed including the following:

PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT.

WARNING!: to reduce the risk of fire, electrical shock or injury to persons or
property:

• Always operate the product from a power source of the same voltage, frequency
and rating as indicated on the product identification plate.

• Remove the unit from its packaging and check to make sure it is in good condition
before using.

• Do not let children play with parts of the packaging (such as plastic bags).

• Close supervision is necessary when the product is used by or near children or

infirms persons. Do not allow children to operate the unit.

• Incorrect operation and improper use can damage the appliance and cause
injury to the user.

• Do not operate any product with a damage cord or plug, or is dropped or appears
damaged in any way. Return the complete product to the place of purchase for
inspection, repair or replacement (if under warranty).

• Before unplugging the power cord, be sure to turn the power off. When touching
the unit, be sure your hands are dry to prevent electrical shock.

• Remove the plug from the socket by gripping the plug. Do not pull on the cord to
disconnect the appliance from the mains. Always unplug the unit when not in use,
before cleaning or when adding or removing parts.

• Never install the unit where it is exposed to direct sunlight, excessive moisture/
rain, dust and lack of ventilation near any heat sources.

• Never immerse the unit in water or any other liquid for cleaning purposes.

• Avoid making contact with moving parts. CAUTION: Never insert fingers, pencils

or any other objects (hair, clothes, utensils, knives, screw drivers, etc.) through
the guards whenever the power plug is connected, especially while the unit is
working.

• Always place the fan on a stable, level surface when operating to prevent the
fan from overturning. Do not run the power cord under carpet. Do not cover the
power cord with throw rugs or runners. Route the power cord away from walking
paths so that nobody can trip over it. The cable should be ketps away from heat,
sharp edges and oil.

• To reduce the risk of electrical shock, do not immerse or expose the product
of flexible cord to rain, moisture or any liquid other than those necessary for
correct operation of the product.

2

IMPORTANT INFORMATION - RETAIN FOR FUTURE USE

• This product should not be used in the immediate vicinity of water, such as
bathtub, washbowls, bathroom swimming pool etc., where the likelihood of
immersion or splashing could occur.

• Be sure that no other high current appliances are plugged into the same circuit
as your fan, as an overload can occur.

• The use of accessory attachments that are not recommended or supplied by the
manufacturer may result in injuries, fire or electric shock.

• Do not let the cord hang over the edge of a table or counter. Ensure that the cord
is not in a position where it can be pulled on inadvertently.

• Do not allow the cord to touch hot surfaces and do not place on or near a hot gas
or electric burner or in a heated oven.

• Do not use the appliance on a gas or electric cooking top or over or near an open
flame.

• Avoid the use of an extension cord as the extension cord may overheat and
cause a risk of fire.

• Do no use outdoors. FOR INDOOR USE ONLY.

• Do not use the appliance for other than its intended use.

• CAUTION: Do not cover the grill, or operate in close proximity to curtains etc. in
order to avoid overheating and fire.

• This appliance is intended to be used in household and similar applications
such as: staff kitchen areas, in shops, offices and motels and other working
environments; farm houses; by clients in hotels, motels and other residential type
environments; bed and breakfast type environments.

• In case of technical problems, switch off the product and do not attempt to repair
it yourself. Return the appliance to an authorised service facility for examination,
adjustment or repair. Always insist on the use of original spare parts. Failure to
comply with the above mentions precautions and instructions, could affect the
safe operation of this product.

• Your appliance must never be switched on through an external timer or any kind
of separate remote control system.

• Do not carry the appliance by the power cord.

• Do not leave the appliance unattended during use. Always unplug the unit when

not in use or before cleaning.

• Ensure that the unit is switched off after use.The manufacturer does not accept
responsibility for any damage or injury caused by improper or incorrect use, or
for repairs carried out by unauthorised personnel.

• Use this fan as described in this manual. Any other uses, not recommended by
the manufacturer, may cause fire, electric shock, or injury to persons and may
void the warranty.

• Do not leave the appliance unattended during use. Always unplug the unit when
not in use or before cleaning.

3

IMPORTANT INFORMATION - RETAIN FOR FUTURE USE

• Ensure that the fan is switched off from the supply mains before removing the
guard.

• Children should be supervised to ensure that they do not play with the appliance.

• This appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning the use of the
appliance by a person responsible for their safety.

• The installation of a residual current device (safety switch) is recommended to
provide additional safety protection when using electrical appliances. It is advisable
that a safety switch with a rated residual operating current not exceeding 30mA
be installed in the electrical circuit supplying the appliance. See your electrician

for professional advice.

TECHNICAL DATA

Description: 16 INCH (40CM) BLACK STAND FAN
Model: SFA1PBA
Input Voltage: 220-240V
Frequency: 50Hz
Power Consumption: 60 Watts

BEFORE FIRST USE

Please read and follow the instructions in this user manual even if you feel you are
familiar with the product, and find a place to keep it handy for future reference.

For your convenience record the complete model number (located on the product
identification plate) and the date you recieved your product, together with your
purchase receipt and attach to the warranty and service information. Retain in the
event that warranty service is required.

Before use, remove all packaging and inspect the appliance for any damage. If there
appears to be any damage, please take the unit back to place of purchase for a
replacement.

NOTE: The rating of this product (as marked on the product identification plate)
is based on specific loading tests. Normal use or the use of other recommended
attachments may draw significantly less power.

4

ASSEMBLY

1. Remove the fan retaining
nut (2) in clockwise
direction and grille retain­ing nut (4) counterclock­wise, then remove the two
pieces.

2. Place the back grill (5) with
the handle up noting
locating pegs.

3. Firmly tighten the plastic
nut (4) for fixing the grill.

4. Place the blade (3) on the
rod (6) until it contacts the
retaining pin.

5. Fit the fan retaining nut (2)
on the motor shaft. THIS IS
A LEFT HAND THREAD.

6. Unscrew the screw on one
of the grills. Place the front
grill (1) on the back grill
(5), the small holes at the
bottom of the grills must
match in order to pass
the screw through. Set
the grilles using the 3 clips
then tighten the screw.

BASE ASSEMBLY

1. Insert the tube of the fan (10) in the base (11), and screw it on with the nut (12).

2. Insert the telescopic tube (8) in the leg tube (10), and secure the assembly firmly
with the adjustment screw (9).

3. Insert the upper part of the fan already mounted (7) on the telescopic tube (8)
and firmly attach to the screw positioned at the back.

5

HOW TO USE

NOTE: Before inserting the plug into a power outlet, make sure the correct voltage

being used corresponds to what is indicated on the rating label, and that the socket
has an earth facility.

It is best to select the fan position before connecting to the mains supply. Always
place the fan on a suitable, flat, stable surface away from strong heat sources (e.g.
direct sunlight).

1. Pull top button out for no oscillation. Push button in for oscillation.

2. The fan can be tilted upward or downward to direct the air accordingly.

3. Plug the power cord into a suitable power socket.

4. You can adjust the speed with the speed buttons: 0: Off - 1: Slow - 2: Medium -
3: Fast.

CARE AND MAINTENANACE

NOTE: If the power cord set of this appliance becomes damaged, discontinue use.

Repairs should be undertaken only by a qualified technician.

CAUTION: To avoid risk of electric shock, you must always switch off and unplug the
fan before cleaning.

• Your appliance must be switched OFF via the main power supply and unplugged,
and allow it to cool down before proceeding with any cleaning, assembling or
disassembling.

• Clean the housing with a damp cloth, a vacuum cleaner brush nozzle over the fan
grille to remove any dust or dirt that may have accumulated.

• Never use harsh detergents, petrol, alcohol, chemical cleaners or solvents to
clean the appliance, as these could deform or damage the product.

• Never immerse the appliance in water.

6

DISPOSAL OF UNIT

Appliances bearing the symbol shown here may not be disposed of in
domestic rubbish or any other household waste. You are required to
dispose of old electrical and electronic appliances like this separately.

To prevent possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote the sustainable re-use
of material resources. To dispose of your appliance correctly, please contact or take
it to your local refuse/ recycling centre. Alternatively, contact your local council or
information on your local re-use centre. Please make this product environmentally
safe for recycling.

CUSTOMER SERVICE

Australian Customer Service

GAF Control (Sales) Pty Ltd
P.O. Box 19
Altona North, Victoria, 3025
Phone: [phone]
Hours: 9am - 5pm (EST) Mon - Fri

www.swan-brand.com.au or www.gafcontrol.com.au

*This product may vary slighlty to the product illustrated due to ongoing product
development.

SWAN BRAND HERITAGE

In 1933 Swan were the first to develop
an electric heating element that could be
immersed in water. This led to the Swan
kettle range that could boil up to six pints of
water in just over nine minutes - pretty hot
for the time! These days it takes about two
minutes for a Swan kettle to boil.

7

WARRANTY - RETAIN FOR FUTURE USE

GAF Control (Sales) Pty Ltd provides a 24-MONTH WARRANTY for SWAN

PRODUCTS purchased within Australia.

Please refer to the terms and conditions of the warranty as stated below.

The benefits of this warranty are provided in addition to other rights or remedies
you may have under a law in relation to the goods and services to which this
warranty relates. Our goods come with guarantees that cannot be excluded under
the Australian Consumer Law. You are entitled to a replacement or refund for a
major failure and for compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have goods repaired or replaced if the goods fail
to be of acceptable quality and the failure does not amount to a major failure. The
above applies subject to the item not being accidentally dropped by the user-or
being used for purposes other than the intended use - or being tampered with.
GAF Control (Sales) Pty Ltd guarantees the product for 24 months from date of
purchase. Refunds or replacements at retail store level are under guidance of the
stores rules/regulations. In the event of requiring assistance, the retailer from who

you purchased the product should be your first port of contact.

Before making a claim under warranty, please refer to your user/installation
manual to ensure that you have followed correct operating procedures of your
product, and refer to the trouble shooting section to assist solving any problems

you may have.

SUPPLIER WARRANTING THIS PRODUCT:

GAF Control (Sales) Pty Ltd

P.O. Box 19, Altona North,

Victoria, 3025, Australia.

Due to the Swan policy of continual product development; specifications, colours
and details of our products may differ slightly from what is in, or depicted in the

user manual or on the product and its carton.

Product: Made in China.

This information can also be found at our website

www.swan-brand.com.au or www.gafcontrol.com.au

8

WARRANTY - RETAIN FOR FUTURE USE

*Terms and Conditions:

• The warranty period begins from the day of purhcase.

• Your proof of purchase MUST be produced before free service or a

replacement will be provided.

• Where the Product is replaced pursuant to this Warranty, the replacement
Product will be subject to the warranty terms and warranty commencement
date of the original product.

• This warranty is only valid if the product is operated and maintained in
accordance with the manufacturer’s instructions.

• The appliance must not be modified or changed in any way.

• Fans and fixed wiring products must only be installed by persons who are

appropriately licensed by the applicable state regulatory body. Therefore to
protect our repair personnel, on-site warranty will not be accepted if products
have been installed by unlicensed persons.

• Small Appliances (including Bar Fridge up to 120 Litres) will be subject to a
replacement if the product is found to be faulty within 12 months of purchase
. Large Appliances will be subject to In-Home Warranty upon provision of
proof or purchase.

• Hard-wired Products (such as ceiling fans) will be subjected to 12-Months
In-Home Warranty only when installed by a qualified trades person and the
qualified installers details are provided to GAF Control upon request.

*Warranty Exclusions:

A claim may be refused if the defective claim has arisen for reasons other than a
manufacturers fault or defective parts or workmanship. Circumstances in which a
warranty claim may be declined include, but are not limited to the following:

• Normal wear and tear;

• Misuse or abuse, including failure to properly maintain or service;

• Damages caused by improper or incorrect installation force-majeure,

electrical surges, lightning, power grid fluctuations, water or by connection
to alternative power supply sources (such as solar inverters etc), are not
eligible for warranty repair;

• Insect or vermin infestation;

• Failure to clean or improper cleaning and/ or operation of the product;

• If the product is modified without authrosation from GAF Control (Sales) Pty

Ltd in writing;

9

WARRANTY - RETAIN FOR FUTURE USE

• If you are unable to supply a certificate of compliance for installation of any
type as required by State & Territory Laws.

Under these circumstances, if the goods are found to be free of defects or any of the
above, the customer will be responsible for payment to the service agent.

Other warranty exclusions include but are not limited to:

• Special access equipment such as scaffolding, scissor lifts or cherry pickers,
etc. The need for such equipment must be stated when booking a service call
and will be charged to the customer on site by attending service agent.

• Damage to property including furniture, carpets, walls, ceilings or any other
event either directly or indirectly are excluded from warranty;

• This product is only covered under warranty for a period of 90 days when
used in a commercial application.

• Any losses or expenses incurred by you in relation to the product or making
a claim under this warranty including without limitation any costs associated
with installation, reinstallation or transporting the product;

• Light globes, remote controls, batteries, filters or similar perishables parts
are not covered under this warranty.

*Important Information:

Please note that all ceiling fans, and some other appliances, will make some audible
noise. Signals sent through the power grid by the electricity supplier for off peak hot
water, street lights and other signals, may cause an intermittent humming noise in
your electrical appliances. These noises do not occur as a manufacturers fault and
are not covered under warranty. Light fittings may accentuate noises and vibrations
and can often be traced back to loose fitting glass or other components.

Before making a claim, please ensure that you have read through this document and
taken all necessary steps to ensure that you have complied with and understand the
points above.

Product fitness for purpose and overall design/sizing is solely the responsibility of
the dealer/ installer and, to the extent permitted by law, GAF Control (Sales) Pty Ltd
takes no responsibility for, and this warranty does not cover, any loss that is suffered
by you as a result directly or indirectly purchasing a product that is not fit for the
purpose you intended or is in any other way inadequate for this purpose.

10

WARRANTY - RETAIN FOR FUTURE USE

GAF Control (Sales) Pty Ltd does not cover travelling costs incurred by their service
agents where service is requested by the purchaser 25km outside of the service
network and a fee may be charged to attend your home.

*Making a Claim:

• When calling to make a claim for warranty, please ensure that you have the
following information on hand:

1. Model Number of product.

2. Date and place of purchase.

3. The nature of the fault.

4. Installers license number and phone number (where necessary).

5. Your name, contact address, email, telephone and fax numbers.

ADDRESS: 441 Kororoit Creek Road
Altona, Victoria, 3018,
Australia.

PHONE: [phone]

EMAIL: [e-mail]

FOR SERVICE, PLEASE CALL: 1300 767 041
FOR SPARE PARTS, PLEASE CALL: 1300 659 489

BRAND: SWAN
PRODUCT: 16 inch (40cm) Black Stand Fan
MODEL NUMBER: SFA1PBA
DATE CODE:
DATE OF PURCHASE:
PLACE OF PURCHASE:

FOR PRODUCTS REQUIRING INSTALLATION:

NAME OF INSTALLER:
PHONE NUMBER:
LICENSE NUMBER:
DATE OF INSTALLATION:

11

www.swan-brand.com.au