Swann Security For Android User Manual
Swann Security (Android)
Registering your Account - Step 1 Registering your Account - Step 2
Have a Smartphone or Tablet? With the Swann Security app, you can turn your mobile device
into a monitoring centre for your security device. Have the peace of mind that you can monitor
your home or business at any time from any place. Best of all, it only takes minutes to get it up
and running (if you have an iOS mobile device, flip the page for instructions).
To download the app:
1. Search for “Swann Security” at your app store
or scan the QR code below.
2. Follow the on-screen instructions to install and
accept any license requirements that may appear.
Welcome to Swann. Sign in or register.
Before registering your account, the app will
request if it can access files, record audio &
video and to access your device’s location. Tap
the “Allow” and or “Always Allow” button for
each request.
To register, tap “Register”.
Proceed to the step below.
Is this where your devices are?
The app will detect your current location. Tap
the right arrow button.
Proceed to the step below.
3. After installing Swann Security, locate the app
and tap the icon to run.
Let’s get started.
Enter your first name and last name then tap
the right arrow button (top right).
Proceed to Step 2.
Where are your devices located?
If this is the correct location that your security device is located, tap the right arrow button
and proceed to Step 3.
If you would like to change the location, tap to
change then tap the right arrow button and
proceed to Step 3.
Security Made Smarter
QSSWANNSECREV4E | © Swann 2019
1 2 3
Registering your Account - Step 3 Pairing your Security Device - Step 4 Pairing your Security Device - Step 5
Where did you buy your Swann device?
Tap the relevant place of purchase then tap the
right arrow button.
Proceed to the step below.
Stay secure.
You will receive an email asking to verify your
email address (you cannot sign in until this is
done). Once verified, tap “Next”.
Hold your mobile device over the QR code sticker on top of your DVR or NVR to scan. When the
QR code has been successfully scanned, you
will see this screen as shown on the left.
Last Step.
Enter an email address and password for your
You will be taken back to the sign in page (as
shown in Step 1). Enter your email address and
account password then tap “Sign In”.
Proceed to the step below.
Pair Device
After sign in, to pair your security device to
03/06/2019 12:30:15
User Name: The default user name for your
DVR or NVR is admin.
Password: Enter the password created during
the Startup Wizard on your DVR or NVR.
When finished, tap “Save”.
Proceed to the step below.
When your security device has been success-
03/06/2019 12:30:15
fully linked to your account, tap “Done”.
account. The password must contain a mixture
of letters and numbers. Enter your password
again to confirm. For safe keeping, write down
your password.
Tap the checkbox to agree to the terms of service.
When finished, tap “Register”.
Proceed to Step 4.
your account, you need to scan the device’s QR
code. Make sure that your mobile device and
your security device are connected to the same
Wi-Fi or modem.
When ready, tap “Start”.
Proceed to Step 5.
Channel 1
Channel 3
Channel 5
Channel 7
03/06/2019 12:30:15
03/06/2019 12:30:15
03/06/2019 12:30:15
Channel 2
Channel 4
Channel 6
Channel 8
03/06/2019 12:30:15
03/06/2019 12:30:15
03/06/2019 12:30:15
You will now see a live view of your cameras.
For a description of the functions available,
access the User Manual function within the
app. This instruction manual is also available to download from support.swann.com.
Search for - Swann Security Manual.
654
Swann Security (iOS)
Registering your Account - Step 1 Registering your Account - Step 2
Have a Smartphone or Tablet? With the Swann Security app, you can turn your mobile device
into a monitoring centre for your security device. Have the peace of mind that you can monitor
your home or business at any time from any place. Best of all, it only takes minutes to get it up
and running (if you have an Android mobile device, flip the page for instructions).
To download the app:
1. Search for “Swann Security” at your app store
or scan the QR code below.
2. Follow the on-screen instructions to install and
accept any license requirements that may appear.
Welcome to Swann. Sign in or register.
Before registering your account, the app will
request if it can send you notifications and to
access your device’s location. Tap the “Allow”
and or “Always Allow” button for each request.
Tap “Register” to start.
Proceed to the step below.
Is this where your devices are?
The app will detect your current location. Tap
the “OK” button then tap the “Allow” button.
If this is the correct location that your security
device is located, tap “Next”.
If you would like to change the location, tap
“Change”, enter your location then tap “Next”.
Proceed to the step below.
3. After installing Swann Security, locate the app
and tap the icon to run.
Let’s get started.
Enter your first name and last name then tap
“Next”.
Proceed to Step 2.
Last step.
Enter an email address and password for your
account. The password must contain a mixture
of letters and numbers. Enter your password
again to confirm. For safe keeping, write down
your password. Accept the terms of service.
When finished, tap “Register”.
Proceed to Step 3.
Security Made Smarter
QSSWANNSECREV4E | © Swann 2019
1 2 3
Registering your Account - Step 3 Pairing your Security Device - Step 4 Pairing your Security Device - Step 5
Stay Secure.
Pair Device
User name: The default user name for your
You will receive an email asking to verify your
email address (you cannot sign in until this is
done). Once verified, tap “Login”.
Proceed to the step below.
After sign in, to pair your security device to
your account, you need to scan the device’s QR
code. Make sure that your mobile device and
your security device are connected to the same
Wi-Fi or modem.
When ready, tap “Start”.
Proceed to the step below.
DVR or NVR is admin, tap to enter.
Password: Tap to enter the password created
during the Startup Wizard on your DVR or NVR.
When finished, tap “Next”.
Proceed to the step below.
Welcome to Swann. Sign in or register.
Enter your email address and account password then tap “Sign In”.
Proceed to Step 4.
If you see a message about the app requesting
to access the camera on your mobile design,
tap “OK”.
Hold your mobile device over the QR code sticker on top of your DVR or NVR to scan. When the
QR code has been successfully scanned, you
will see this screen as shown on the left.
Proceed to Step 5.
03/06/2019 12:30:15
Channel 1
03/06/2019 12:30:15
Channel 3
03/06/2019 12:30:15
Channel 5
03/06/2019 12:30:15
Channel 7
03/06/2019 12:30:15
Channel 2
03/06/2019 12:30:15
Channel 1
Channel 4
03/06/2019 12:30:15
Channel 6
03/06/2019 12:30:15
Channel 1
Channel 8
The app will verify your connection and you will
now see a live view of your cameras.
For a description of the functions available,
access the User Manual function within the
app. This instruction manual is also available to download from support.swann.com.
Search for - Swann Security Manual.
654
Loading...