Swann PRO-605 SW224-HDN Operating Instructions Manual

888

© Swann Communications 2009

Swann Communications USA Inc.

12636 Clark Street

Santa Fe Springs CA 90670

USA

Swann Communications PTY. LTD.

Building 4, 650 Church Street,

Richmond, Victoria 3121

Australia

Warranty Information

Helpdesk / Technical Support Details

Swann Technical Support

All Countries E-mail: [e-mail]

Telephone Helpdesk

See http://www.worldtimeserver.com for information on time zones and the

current time in Melbourne, Australia compared to your local time.

USA toll free

1-800-627-2799

(Su, 2pm-10pm US PT)

(M-Th, 6am-10pm US PT)

(F 6am-2pm US PT)

USA Exchange & Repairs

1-800-627-2799 (Option 1)

(M-F, 9am-5pm US PT)

AUSTRALIA toll free

1300 138 324

(M 9am-5pm AUS ET)

(Tu-F 1am-5pm AUS ET)

(Sa 1am-9am AUS ET)

NEW ZEALAND toll free

0800 479 266

INTERNATIONAL

[phone]

Swann Communications warrants this product against defects in workmanship and
material for a period of one (1) year from it’s original purchase date. You must pres­ent your receipt as proof of date of purchase for warranty validation. Any unit which
proves defective during the stated period will be repaired without charge for parts or
labour or replaced at the sole discretion of Swann. The end user is responsible for all
freight charges incurred to send the product to Swann’s repair centres. The end user is
responsible for all shipping costs incurred when shipping from and to any country other

than the country of origin.

The warranty does not cover any incidental, accidental or consequential damages aris­ing from the use of or the inability to use this product. Any costs associated with the
fitting or removal of this product by a tradesman or other person or any other costs
associated with its use are the responsibility of the end user. This warranty applies to
the original purchaser of the product only and is not transferable to any third party.
Unauthorized end user or third party modifications to any component or evidence of

misuse or abuse of the device will render all warranties void.

By law some countries do not allow limitations on certain exclusions in this warranty.

Where applicable by local laws, regulations and legal rights will take precedence.

1

Advanced security made easy™

SW224-HDN

www.swannsecurity.com

SR224-HDN-10006-230709

Weather Resistant
Security Camera

Night Vision 65ft/20m

Operating Instructions

PRO-605™

222

FCC Verifi cation:
NOTE: This equipment has been tested and found to comply with the limits for

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are de­signed to provide reasonable protection against harmful interference in a residen­tial installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio or television reception, which can be deter­mined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:

· Reorient or relocate the receiving antenna

· Increase the separation between the equipment and the receiver

· Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected

· Consult the dealer or an experienced radio/TV technician for help

IMPORTANT: Prohibition against eavesdropping.
Except for the operations of law enforcement offi cers conducted under law­ful authority, no person shall use, either directly or indirectly, a device operated
pursuant to the provisions of this Part for the purpose of overhearing or record­ing the private conversations of others unless such use is authorized by all of the
parties engaging in the conversation.

WARNING: Modifi cations not approved by the party responsible for compliance
could void user’s authority to operate the equipment.

IMPORTANT SAFETY INSTRUCTIONS:

· Make sure product is fi xed correctly and stable if fastened in place

· Do not operate if wires and terminals are exposed

Before You Begin

2 7

Troubleshooting Guide

Technical Specifications

Problem: I can’t see the camera on my TV.
Solution: Ensure the camera is plugged in and the TV or VCR is tuned to the

correct input channel.

Problem: When I view my camera at night I only see a bright spot and no image.
Solution: Night Vision will refl ect when shining through a window. Move the

camera to the other side of the window or another location.

Problem: The BNC Extension Cable will not connect to my TV.
Solution: Connect the BNC to RCA adapter to the end of the Extension Cable

and plug into the TV.

Problem: On my Swann DVR, Video Loss appears where my camera should be.
Solution: Check the Extension cable is securely connected to the camera and

check the connection is secure on the back of the DVR. Also ensure the camera
has power by trying a second power outlet.

Video

Image Sensor 1/4” Color CCD
Video Quality 420 TV Lines
Number of Effective Pixels NTSC: 510 x 492
PAL: 628 x 582
Minimum Illumination 0 Lux (IR on)
Day/Night Mode Color during day /
switches to B&W night
White Balance Automatic
Signal / Noise Ratio > 50dB
Electronic Shutter 1/60 - 1/100,000 NTSC
1/50 - 1/100,000 PAL
Gain Control Automatic
Backlight Compensation Yes
Wide Dynamic Range N/A
Lens 6mm
Viewing Angle 33 degrees

Night Vision
Number of Infra-Red LEDs 24
Infra-Red Wavelength 850nm
Night Vision Distance Up to 65ft / 20m
Infra-Red LED Life 10,000 hours

General
Operating Power DC 12V
Operating Temperature -20°C ~ 60°C

-4°F ~ 140°F
Body Construction Aluminum
Dimensions - Camera 2.8” x 2.4” x 5.0”
71mm x 62mm x
127mm
Dimensions – Stand 5.3” x 3.4” x 3.4”
135mm x 87mm x
87mm
Weight – Camera 1.1lbs / 500g

7