Swann PRO-531 User Manual

PRO-531

IR Dome Camera

M531CAM050312T

2

IMPORTANT NOTE: Prohibition against eavesdropping

Except for the operations of law enforcement ocers conducted under lawful
authority, no person shall use, either directly or indirectly, a device operated pursuant
to the provisions of this Part for the purpose of overhearing or recording the private
conversations of others unless such use is authorized by all of the parties engaging
in the conversation.

WARNING: Modications not approved by the party responsible for compliance
could void user’s authority to operate the equipment.

IMPORTANT: Safety Instructions

• Make sure product is xed correctly and stable if fastened in place

• Do not operate if wires and terminals are exposed

Table Of Contents

Before You Begin 2

IMPORTANT NOTE: Prohibition against eavesdropping 2
IMPORTANT: Safety Instructions 2

Pack Contents 3

Single Camera Pack 3

Mounting the camera 3

Two or Four Camera Pack 3

Mounting the Camera (cont.) 4
Troubleshooting 4
Technical Specications 5
Connection Guide 6

Before You Begin

3

Single Camera Pack

• 1 x PRO-531 CMOS Security Camera

• 1 x Extension cable

• 1 x Screws & wall plugs

• 1 x Power Adapter

• 4 x Security Stickers

• 1 x Operating Instructions

Two or Four Camera Pack

• 2/4 x Pro-531 CMOS Security Camera

• 2/4 x Extension Cable

• 2/4 x Screws and Wall Plugs

• 1 x Power Splitter

• 1 x Power Adaptor

• 4 x Security Stickers

• 1 x Operating Instructions

Pack Contents

The Pro-531 is a 600TVL mid-sized dome camera that uses a CMOS video sensor
ensuring high quality images. It is housed in a light plastic body making it easy to
mount and blend into most modern decors.

The Pro-531 also features night vision IR LEDs which give black and white ‘night
vision’ even in total darkness.

Mounting the camera

There are two main parts to mounting the Pro-531; the base which is xed to a ceiling
or wall and the camera which is then secured to the base.

• If the base is already secured to the dome camera, twist it anti-clockwise while
holding the camera to remove it from the camera.