Swann MALARM1301012E User Manual

Wireless Alarm Kit

English

MALARM1301012E

2

Important Information

FCC Verication

NOTE: This equipment has been tested and found to comply with the limits

for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio or television reception, which can be

determined by turning the equipment o and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and the

receiver

• Connect the equipment into an outlet on a circuit dierent
from that to which the receiver is connected

• Consult the dealer or an experienced radio/TV technician for
help

These devices comply with part 15 of the FCC Rules. Operation is subject to the

following two conditions:

1. These devices may not cause harmful interference, and

2. These devices must accept any interference received, including
interference that may cause undesired operation.

WARNING

Modications not approved by the party responsible for compliance could void

user’s authority to operate the equipment.

IMPORTANT SAFETY INSTRUCTIONS

• Make sure product is xed correctly and stable if fastened in place

• Do not operate if wires and terminals are exposed

• Do not cover vents on the side or back of the camera and allow adequate space

for ventilation

3

Warranty Information

Limited Warranty Terms & Conditions

Swann Communications warrants this product against defects in workmanship and

material for a period of one (1) year from its original purchase date. You must present

your receipt as proof of date of purchase for warranty validation. Any unit which

proves defective during the stated period will be repaired without charge for parts

or labor or replaced at the sole discretion of Swann. The end user is responsible for all

freight charges incurred to send the product to Swann’s repair centers. The end user

is responsible for all shipping costs incurred when shipping from and to any country

other than the country of origin.

The warranty does not cover any incidental, accidental or consequential damages

arising from the use of or the inability to use this product. Any costs associated with

the tting or removal of this product by a tradesman or other person or any other

costs associated with its use are the responsibility of the end user. This warranty

applies to the original purchaser of the product only and is not transferable to any

third party. Unauthorized end user or third party modications to any component or

evidence of misuse or abuse of the device will render all warranties void.

By law some countries do not allow limitations on certain exclusions in this warranty.

Where applicable by local laws, regulations and legal rights will take precedence.

For Australia: Our goods come with guarantees which cannot be excluded under

Australian Consumer Law. You are entitled to a replacement or refund for a major

failure and for compensation for any other reasonably foreseeable loss or damage.

You are also entitled to have the goods repaired or replaced if the goods fail to be of

acceptable quality and the failure does not amount to major failure.

Swann Communications USA Inc.

12636 Clark Street

Santa Fe Springs CA 90670

USA

Swann Communications

Unit 13, 331 Ingles Street,

Port Melbourne Vic 3207

Swann Communications LTD.

Stag Gates House

63/64 The Avenue

SO171XS

United Kingdom

4

Congratulations on your purchase of this Swann Wireless Alarm Kit.

You’ve chosen a versatile security solution that’s great for almost any home or small
business that is as easy to install as it is to stick a double-sided piece of tape to
something.

How it Works

The Base Unit will monitor for signals
coming from the Sensors and the
Remote Control.

The sensors and the remote control
can only send information. The
receiver/siren can only receive
information. Thus, the receiver needs
to be in a central location as close to
the sensors and where you’ll want to
use the remote control.

Each sensor has a number from 1
through 4, which correspond to the
numbers on the front face.

Alarm / Chime

You can set the Receiver to act as either an alarm siren or as a doorchime.

When set to Chime, the receiver will emit a chime tone each time any sensor detects
anything. This means that any time something moves in front of the PIR Sensors the
chime will sound.

Remember: There’s no such thing as “too much protection”.

This Wireless Alarm Kit is a fantastic entry-level, easy to install security system and is
a great deterrent to theives and intruders. However, it’s not infallible, and could be
circumvented by a skilled (or very lucky) assailant.

Remember: The Wireless Alarm Kit will detect intruders, it can’t actually do anything
to stop them other than making a loud alarm noise.

We strongly suggest that the Wireless Alarm Kit be used as part of a comprehensive
security solution, perhaps involving CCTV and/or an Internet-based monitoring
solution. Quality doors and locks are also important, as are vandal-resistant windows
if you happen to be in a high-risk area.

Introduction