Swann DIY Security Cam Specification
Help Desk / Support Details
Swann Technical Support
All Countries E-mail: tech@swann.com.au
Telephone Helpdesk
UNITED STATES toll free
877-274-3695
(Sun-Thurs, 2pm-10.30pm PST)
800-627-2799
(Mon-Fri, 9am-1pm PST)
USA Exchange & Repairs
562-777-2551
(Mon-Fri, 9am-5pm PST)
AUSTRALIA toll free
1300 13 8324
(Mon-Fri, 9am-5.30pm Aus EST)
+61 3 8412 4610
(Mon-Fri, 9am-5.30pm Aus EST)
See http://www.worldtimeserver.com for information on different time zones
and the time in Melbourne Australia compare to your local time.
Warranty Information
English
DIY Security Cam
Color Video Camera with Audio
With Tripod and Telephoto Lens
International
If this device does not work when you first plug it in,
do not take it back to the store.
Swann Communications warrants this product against defects in workmanship and material for
a period of one (1) year from it’s original purchase date. You must present your receipt as
proof of date of purchase for warranty validation. Any unit which proves defective during the
stated period will be repaired without charge for parts or labour or replaced at the sole
discretion of Swann. The repair or replacement will be warranted for either ninety days or the
remainder of the original one year warranty period, whichever is longer. The end user is
responsible for all freight charges incurred to send the to Swann’s repair centres.
end user is responsible for all shipping costs incurred when
other than the country of origin. The warranty does not cover any incidental, accidental or
consequential damages arising from the use of or the inability to use this . Any costs
associated with the fitting or removal of this product by a tradesman or other person or any
other costs associated with its use are the responsibility of the end user. This warranty applies
to the original purchaser of the only and is not transferrable to any third party.
Unauthorised end user or third party modifications to any component or evidence of misuse or
abuse of the device will render all warranties void.
product
product The
shipping from and to any country
product
www.swannsecurity.com
4
Contact the Swann Helpdesk using our fast e-mail service
tech@swann.com.au or call us on one of the Toll-Free
numbers shown on the back cover of this booklet.
Most problems can be quickly and easily fixed with a simple
e-mail or a quick chat with one of our friendly technical staff.
(Toll-Free available in the US and Australia only)
Installation Guide
Installation Instructions
How to connect DIY Security Cam to your TV or VCR
The DIY SecurityCam is designed for use with any TV, VCR, Security Monitor or computer with a
video capture card. The camera has a built-in microphone to offer sound as well as a visual image
and can be used indoors or in a sheltered position outside. The DIY SecurityCam can be used for a
variety of purposes including monitoring callers at the door, keeping your car, yard, shop or
warehouse under observation or used as a camera to monitor your baby.
Contents and Parts Identification
1. DIY Security Camera with telephoto lens & cable*
2. 9Volt DC 300mA Power Adaptor (adaptor design varies depending on country)
3. 9Volt Battery Snap
4. Tripod
5. This Quick Start Guide
1
3
2
4
How to connect DIY Security Cam to your TV or VCR
DIY SecurityCam
Your is designed to transmit quality color images and sound to your
television and is operated by mains power.
To help guide you through the process of setting up the , we have outlined
the steps and numbered each of the components required in the diagram below.
VCR, TV or MONITOR
WHITE
V
I
D
E
IO
D
O
U
A
OU
T
N
I
V
I
D
E
A O
O
U
D
I
VIDEO IN
* To extend the operating distance from your TV or VCR you will need to purchase an A/V extension cable
(sold separately) which are available at most electronics stores.
3 4
AUDIO IN
2
1
YELLOW
DIY SecurityCam
POWER
7
ADAPTOR
POWER
6
PLUG
BLACK
5
DIY SECURITYCAM
Step 1: At the end of your DIY SecurityCam cable you will find three colored plugs:
Yellow (Video RCA) ~ White (Audio RCA) ~ Black (DC Power)
Step 2: Plug the yellow RCA plug into the "Video In" input (3) (usually located at the back of your TV or VCR).
Step 3: Plug the white RCA plug into the "Audio In" input (4) (usually located at the back of your TV or VCR).
Step 4: Connect the black plug (5) at the end of your DIY SecurityCam into the black plug at the end of the
power adaptor (6).
Step 5: Plug the power adaptor (7) into the mains power point in your wall.
Step 6: If you have an A/V TV with RCA sockets you will need to switch the TV to the AV channel to view the
camera. To connect the camera to your VCR, you will need to turn the VCR to the A/V Input selection and turn
your TV onto the channel you would normally use to view a tape or movie on your VCR. This channel may be
activated by a button on your remote that is marked with this symbol , or L1 or L2 or possibly AV1 or AV2
.Please read the instructions for your VCR or TV for more information on using their A/V inputs.
Step 7: If the picture is not clear, you will need to focus the camera by loosening the small locking screw below the
lens, and turning the lens in a clockwise or anti-clockwise direction until the image is clear. Once the lens is
focussed correctly, tighten the locking screw to hold it in place.
Mounting the camera
1. Once you have chosen the best position for the camera, switch the power to the
camera off, and unplug the power lead from the camera.
2. When mounting the DIY SecurityCam to your ceiling or wall, please ensure that you
swing the mounting bracket backwards so that the small holes (microphone) at the top of the camera lens are
‘up’, otherwise you will find that your pictures are displayed upside down.
3. Mount the camera bracket in the chosen location by marking holes with a masonary drill bit. Line up the camera
bracket to the drilled holes and screw into position using the screws provided. If securing the bracket to a
wooden surface it should not be necessary to drill holes or use masonary plugs.
4. Run the camera cable back to the TV/VCR, any holes that you drill need to be at least 14mm in diameter to
allow the connectors to pass through. Reconnect the power lead to the camera and switch the camera power
back on.
To mount the tripod, screw the tripod into the mounting hole which is located underneath the camera bracket.
Extend the legs of the tripod to get the camera into a higher position or adjust for an un-even surface area.
Please Note: The camera must not be placed where it looks directly into the sun or any other bright light source, as
this will not only result in a poor image, but will eventually damage the electronics of the camera.
Areas with a high degree of contrast in the light levels may require re-positioning of the camera in order to obtain the
best image.
For night-time use or when situated in a dimly-lit environment the camera requires the aid of suitable exterior lighting to
ensure a good picture is achieved.
2 3
Loading...