Swann Big Dome Deterrent Specification

Help Desk / Support Details

Swann Technical Support

All Countries E-mail: [e-mail]

Telephone Helpdesk

UNITED STATES toll free

877-274-3695

(Sun-Thurs, 2pm-10.30pm PST)

800-627-2799

(Mon0Fri, 9am-1pm PST)

USA Exchange & Repairs

562-777-2551

(Mon-Fri, 9am-5pm PST)

AUSTRALIA toll free

1300 13 8324

(Mon-Fri, 9am-5.30pm Aus EST)

[phone]

(Mon-Fri, 9am-5.30pm Aus EST)

See http://www.worldtimeserver.com for information on different time zones

and the time in Melbourne Australia compare to your local time.

Warranty Information

English

Big Dome Deterrent

Large indoor & outdoor dome
with aluminum wall mounting bracket

International

If this device does not work when you first plug it in,
do not take it back to the store.

Swann Communications warrants this product against defects in workmanship and material for
a period of one (1) year from it’s original purchase date. You must present your receipt as
proof of date of purchase for warranty validation. Any unit which proves defective during the
stated period will be repaired without charge for parts or labour or replaced at the sole
discretion of Swann. The repair or replacement will be warranted for either ninety days or the
remainder of the original one year warranty period, whichever is longer. The end user is
responsible for all freight charges incurred to send the to Swann’s repair centres.
end user is responsible for all shipping costs incurred when
other than the country of origin. The warranty does not cover any incidental, accidental or
consequential damages arising from the use of or the inability to use this . Any costs
associated with the fitting or removal of this product by a tradesman or other person or any
other costs associated with its use are the responsibility of the end user. This warranty applies
to the original purchaser of the only and is not transferrable to any third party.

Unauthorised end user or third party modifications to any component or evidence of misuse or
abuse of the device will render all warranties void.

product

product The

shipping from and to any country

product

www.swannsecurity.com

Contact the Swann Helpdesk using our fast e-mail service
[e-mail] or call us on one of the Toll-Free
numbers shown on the back cover of this booklet.

Most problems can be quickly and easily fixed with a simple
e-mail or a quick chat with one of our friendly technical staff.
(Toll-Free available in the US and Australia only)

FCC NOTICE

This device co mp li es w ith Part 15 of FCC Rules.
Operation is s ub je ct t o the following conditi on s:
(1) This device ma y no t ca use harmful interfere nc e, a nd
(2) this device mu st a cc ept any interference re ce iv ed ,
including in te rf er ence that may cause undes ir ed o peration

Installation Guide

Instructions on how to attach a fixed camera and wall mounting bracket.

1. Firstly attach the camera onto the camera
bracket. Keep the orientation of the dome in
mind when mounting the camera.

2. Adjust the camera bracket to suit your viewing
direction. Then secure the bracket into place by
screwing the locking screw in a clockwise
direction.

7. Connect the AV and DC cable onto the back
of the camera. This illustration shows how to
connect the cables into the back of a Swann
C500, but actual connections will vary
depending on your camera.

8. We highly recommend you test the camera
now. Connect the other end of the AV cable into
you TV/monitor and power up the camera to see
if you get a picture. Make sure the camera is in
focus and all the appropriate settings are made.
If possible, temporarily mount the dome to the
desired location and check if the image is
viewable.

3. Screw the camera bracket onto the bottom of
the dome using the bracket retainer.

5. Now thread the cable into the bottom of the
dome.

4. Thread the AV cable through the wall
mounting bracket. Make sure the male DC plug
is passed through the bracket so it can be
connected to the camera. (See above image)

6. Fix the wall mounting bracket onto the dome
by screwing in the 3 holding screws in a
clockwise direction using a flat head screw
driver.

9. Align the dome cover and dome ring over the
holes. (See image above)

To mount the dome onto your wall, please visit your local hardware store for wall mounting bolts.
We recommend you get advice from your hardware store staff on the appropriate tools to use and
wall mounting bolts for your wall. Please keep in mind the dome and wall mounting bracket weighs
approximately 5.5 lb / 2.5 kg
Please make sure you remove the dark insert film if you wish to use this dome deterrent as a real
dome camera. (See image below)

10. Secure the dome cover to the dome body
using 3 screws supplied.