Statements, Disclosures and Precautions
Getting to Know Your Logic T7-QUAD Tablet
Switching Your Tablet On/Off
Logic T7-QUAD User Manual
1
Installing Software Online
Important safety instructions and certifications
Statements, disclosures and precautions
Thank you for purchasing this innovative tablet from Logic. We
invite you to read the instructions contained in this user manual so
you can configure and utilize all the functions of your new tablet.
For additional information you can visit us at: logicmobility.com
Warnings and Precautions
2
Please do not disassemble; this is a highly precise electronic
product.
Avoid any heavy impact or collision with this product
Avoid using this product in the following conditions: high or
low temperatures, moist or dusty environments, strong
magnetic fields, and/or long term exposure to sunlight.
If cleaning is necessary, only use a soft moist cotton cloth to
wipe the outer shell of the product. Do not use any other
chemical cleaning solutions.
Avoid placing this product near any liquids in case there is
accidental spillage onto or into the product
Excess use of headphones at high volume may cause
permanent hearing impairment.
Please only use permitted batteries, chargers, and
accessories with this product; use of any other types will
violate the warranty regulations and may be dangerous.
Please follow the relevant local environmental regulations to
deal with obsolete products and accessories.
3
If the product becomes faulty at any point, Logic assumes no
responsibility for any loss of data/music/video and/or any
other files. Please follow the user manual for standard
operation and timely backups.
Statements and Disclosures
Specifications are subject to change without notice.
While the utmost care has been taken in producing this
manual neither Logic, nor any other affiliated company,
assume responsibility for any mistakes or errors contained in
this document.
Screen captures presented in this manual are for reference
purposes, actual screens may vary.
Logic and the Logic logo are registered trademarks of Logic.
Other trademarks are the property of their respective owners.
Always remember to back-up important data; we assume no
responsibility for any errors with this product
Please read the operating instructions carefully. Use the
accessories supplied with the product to avoid any
4
unexpected damage. Warranty cannot be honored if the
product is used with incompatible accessories.
Although the latest version of Android available at the time of
the products manufacturing is compatible with tablet
specifications, Logic assumes no responsibility for the
performance of the Android software supplied by Google
and/or any errors/software bugs/software failures.
There may be slight discrepancies between pictures/data in
this manual and the actual product. The actual product is
accurate.
We cannot be responsible for any act of downloading illegal
software and/or anything else that is considered illegal.
Logic cannot support the Android Operating System or offer
any support for any Android based software that the user
may download, install, and/or purchase.
Getting to Know Your Logic T7-QUAD
5
Switching Your Tablet On/Off
To switch on: press and hold the power switch for 3 seconds and
wait for startup.
To switch off: press and hold the power switch for 3 seconds →
click Power off → click OK.
Lock/unlock screen: briefly press the power switch to lock/unlock
the screen.
Forced shout down: if the device is not responding, press and hold
the power switch for 7 seconds to force a shut-down.
6
Warning: a forced shut-down may cause unexpected errors in the
system
Touch Screen
The touch screen is easy and convenient to use. You can use the
touch screen in the following methods:
Single click: briefly tap the screen with your finger.
Click and hold: click the screen with your finger and hold for about
2 seconds.
Drag: click a certain icon on the screen and hold, then move your
finger, the icon will move accordingly.
To avoid damaging the screen, never put anything on it.
Using a Micro SD Card
Your device supports up to a 32GB storage card. Locate the slot
labeled T-Flash on your tablet to access the Micro SD slot.
7
Insert the card into the card slot, and push it in with your finger until
a “click” is heard. Now the card is ready for use.
Removing Micro SD card
First, close all programs or files on the card. Click Settings →
Storage → Remove SD card → OK. Then press the card with your
finger, and simply remove it when it is ejected.
Avoid inserting and removing the card repeatedly in a short time,
this may cause damage to the card. We suggest you use name
brand cards to ensure compatibility.
Getting Started
Reminder icons
These reminder icons appear in the information bar along the top
of the screen to provide information as to the status of your tablet.
8
Long press: turn on/shut down
Short press: sleep/wake up
Click from any screen to return to the
main screen
Click from any screen to return to the
previous screen
Click to display the menu interface
Menu button
Display recently browsed history
Buttons: Descriptions and Functions
Charging the device
The device is equipped with a built-in battery which must be
charged before using for the first time. It is recommended to charge
the battery for minimum of 10 hours for the first time.
You may use the device while it is charging, but this may prolong
the charging time.
Only use the authorized charger provided with the unit (input:
AC110〜240V 50/60Hz; output: DC5V/2A). Logic is not
responsible for damages caused by using an unauthorized
9
charging device or other unauthorized accessories.
To charge device: connect one end of the AC adaptor to the power
outlet and the other end to the Micro USB port on the device (under
normal conditions it may take about 5 hours to fully charge the
device).
The battery icon will roll during charging, and when it is full
(it will stop rolling), please disconnect the AC adaptor.
Starting the device
Press and hold the power switch for 3 seconds and wait for system
startup.
Wi-Fi settings
We suggest you configure your Wi-Fi network before using your
new tablet, as many functions require it to work normally.
1. Click Settings→ Wireless and Network
10
2. Switch the Wi-Fi on. The device will search for and list all
available Wi-Fi networks. If an icon is displayed, you need
to enter the correct password to connect to that Wi-Fi
network.
3. Click the desired Wi-Fi network → Enter the password (if
any) → Click Connect.
4. Click Return to return to the desktop.
If the Wi-Fi network is set as hidden it will not be discovered
automatically. In this case you need to click Add Wi-Fi Network
and enter the necessary information manually.
Desktop
11
Download applications easily and
conveniently.
Send and receive emails via your email
address.
Play and manage your videos.
For arithmetic operations.
Connect to and explore the Internet.
Record and play-back sounds.
Click any icon to open the document or run the application.
Click and drag the icon to move it to another location on the screen.
Lock Screen
You can set auto lock screen or lock screen manually by pressing
the power button. The lock screen
interface is as follows:
Slide to the right to unlock the
screen. Slide to the left to unlock
and enter the camera.
Installed Applications
12
Calendar for setting schedules and
agendas.
Personalize your tablet’s settings.
View current time and set alarm clock.
View and manage your files and
applications. Install Android applications
and backup files on SD card.
History of downloaded files.
Take photos of your favorite moments.
Play and manage your music files.
Desktop Menu
On the desktop, click icon to display menu functions.
You can select your desired wallpaper from the images
available.
Managing Applications
Installing
You can find many interesting and free Android applications
through the internet. Simply open the browser and search for
“Android Applications”.
13