M1
LOGIC
User Guide
User Manual | Manual de Usuario
Guia de Usuario
Welcome
Thank you for purchasing this innovative Duo product. Due to
different software versions and network operators, refer to your
phone for the correct details. The specifications in this manual are
subject to change without notice. Duo reserves the final right to
interpret the performance of this mobile phone. While the utmost
care was taken in the production of this manual, neither Duo nor
any other affiliated company, assumes responsibility for any
mistakes or errors that may be in this document. Duo and the Duo
logo are registered trademarks of Duo. Other trademarks are the
property of their respective owners.
Description of Keys
[Left soft key]
Press this key to enter the main menu
Press this key to confirm the function
Press this key to answer a call
[Right soft key]
Press this key to enter phonebook
Press this key to go back to previous menu
Press this key to reject a call
[OK Key] Press OK key to confirm and enter main menu, press and
hold this key to turn on torch light
[Call key] Press this key to make a call
Press to answer an incoming call
Press to enter call history
[End key] Press to end a call, press and hold to turn off phone
Power On: Press and hold to turn on phone
Press this key to go back to standby screen.
[Navigation keys]
Press to scroll through options when browsing a function list. In
edit mode, press direction keys to navigate. In standby mode,
press a direction key to enter the specified function page. You can
also customize direction keys to match the desired functions. In
conversation mode, press up or down to adjust volume
[Number keys]
Dial numbers to make call. Press and hold number keys for speed
dial, if you set speed dial on.
[ * key] , press * key twice. In Player function or FM radio press *
key to decrease volume.
[ # key] Press and hold this key to switch between profiles. Press
with left soft key to lock the keypad. In Player function or FM radio,
press # key to increase volume.
Getting Started
1. Installing the SIM Card and the Battery
Ensure that the gold contact area on the SIM card is facing
downward, and the beveled edge is properly aligned with the SIM
card slot.
Warning: Make sure to switch off the phone before taking out SIM
card, otherwise your SIM card might be damaged.
2. Removing the Battery and the SIM Card. Before removing the
battery and the SIM card, ensure that your phone is powered off.
3. Charging Batter. It takes about 2.5 hours to fully charge the
battery. While charging, the power indicator on the phone’s
display will flash and rotate, if the phone is off a charging screen
will appear indicating the phone is charging. Once the charging
indicator stops flashing, charging has completed, if the phone is
off a charging-finished icon will appear. It is normal for the battery,
phone, and charger to get hot during the charging process.
Note: Battery must be charged in a well-ventilated area with a
temperature between -10℃~+55℃. Only use a charger provided
by manufacturer. Using an unauthorized charger might cause
damage and voids the warranty. If the charging temperature is too
high or too low, the phone will automatically give a warning and
stop charging to prevent damage.
4. Turn phone on/off To turn phone on/off, press and hold the End
key. If you turned on the phone without a SIM card installed you
will see the prompt "Insert SIM card". Once the phone is ready
you may see the following prompts: Enter phone password – if you
have set up phone lock password. Enter PIN – if you have set up
SIM card password. Search – the phone will search till finding
appropriate network connection.
Basic Functions
1 Making a call
When the logo of the service provider appears on the display
screen, you can dial or receive calls. The info bar at the upper left
corner of the display screen shows network signal strength (when
there are 5 info bars the signal is at its strongest). The call quality is
very likely to be affected by obstructions; therefore movement in a
small area can effectively improve call performance. Enter phone
number, then press Dial Key to make the cal l.
2 Emergency calls
As long as in the network service range (which can be confirmed by
checking the signal strength bars), you can always call emergency
service. If your network supplier does not provide roaming service
in your area, the screen will display"Emergency", to inform you
that only emergency calls are permitted. If you are within the
network service range, you can also make emergency calls even
without the SIM card.
3 Answering a call
Simply press the Call Key to answer an incoming call. If an
earphone has been connected, use the button on the earphone to
answer a call. If it is not convenient for you to press it, turn on
automatic answer, assuring that the earphone is plugged in, so as
to answer calls automatically while the phone rings or vibrates.
If Any Key answer function is chosen, pressing any key, other than
End key and up/down key, can answer an incoming call.
4 Call records
Your phone can also store call records of the latest missed calls,
received calls, dialed calls, time of last call as well as total talk time.
5 Call options
When on a call pressing “Options” will display the options
available during a call*:
Turn on Speaker phone, Put current call on hold, Enter contacts
menu, Enter Call log menu, Enter message menu, Record the
current call, Mute, Multiple party conference call, Call Waiting
* Some of these functions are dependent on the services offered by your operator.
Function menu
1 Scrolling and selecting functions
In standby mode press left soft key "menu" to enter function
menu, or during a call,
press ”Options” to enter call option menu. Press up or down keys
to scroll to the function you need,
then press left soft key, or OK key, to enter that function. You can
exit a menu by pressing the right soft key,
or the End key to return to standby mode.
2 List of functions
1 Call logs
2 Contacts
3 STK(SIM Toolkit)
4 Multimedia
4-1 Camera
4-2 DV
4-3 Audio
4-4 Video
4-5 FM radio
4-6 Recorder
4-7 Image
4-8 Snake
5 Message
5-1 Write message
5-2 Inbox
FCC Statement
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates
and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation.
Note: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this
equipment. such modifications could void the user’s
authority to operate this equipment. Any Changes or modifications
not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
5-3 Outbox
5-4 Drafts
5-5 Send box
5-6 Security inbox
5-7 Templates
5-8 Broadcast message
5-9 Voice mail server
6 Profiles
6-1 Normal
6-2 Silent
6-3 Indoor
6-4 Outdoor
7 Tools
7-1 Whatsapp
7-2 My files
7-3 Alarm
7-4 Calendar
7-5 Bluetooth
7-6 Calculator
7-7 World clock
7-8 Ebook
7-9 Torch
8 Internet
9 Settings
9-1 Call settings
9-2 Phone settings
9-3 Display
9-4 Security
9-5 Connections
SAR Statement
This Phone meets the government's requirements for exposure to
radio waves. The guidelines are based on standards that were
developed by independent scientific organizations through
periodic and thorough evaluation of scientific studies. The standards
include a substantial safety margin designed to assure the safety of
all persons regardless of age or health.
FCC RF Exposure Information and Statement The SAR limit of USA
(FCC) is 1.6W/kg averaged over one gram of tissue. This device has
also been tested against this SAR limit.
Detail SAR information of this device can be viewed on-line at
http://www.fcc.gov/oet/ea/fccid/.
Please use the device FCC ID number for search. This device was
tested for typical body-worn operations with the back of the handset
kept 1.5cm from the body. To maintain compliance with FCC RF
exposure requirements, use accessories that maintain a 1.5cm
separation distance between the user's bodies. The use of belt clips,
holsters and similar accessories should not contain metallic
components in its assembly. The use of accessories that do not satisfy
these requirements may not comply with FCC RF exposure
requirements, and should be avoided.
FCC ID:O55M112X2
Specifications
Duo Shark
Description
Memory*
External Memory
Cellular
Display
Camera
Wireless
Connectors
Multimedia
Audio**
Video**
Photographs
Battery
Input/Output
Dimensions/Weight
Specifications are subject to change without prior notice.
* Actual storage may be less due to device software.
** Certain bitrates, resolutions, and/or file variations may not be compatible.
Feature Phone
32Mb(ROM) + 32Mb(RAM)
Micro SD slot(max.32GB)
GSM Quad-band,GPRS/WAP
1.77”color LCD display,Resolution:128×160
VGA
Bluetooth
Micro USB 2.0(for charging)
Built-in speakerµphone
FM Radio,Audio player
Video player
Photo gallery viewer
800mAh Li-ion
Input:AC110-220V,Output:DC 5V@500mA
111.4×46.0×14.0mm/66g.
Bienvenido
Gracias por haber adquirido este teléfono móvil innovador Duo. Lo
invitamos a leer las instrucciones presentes en este manual para que
pueda configurar y utilizar todas las funciones que ofrece su teléfono
nuevo. Las especificaciones en este manual están sujetas a cambios
sin aviso. Duo reserva el derecho de interpretar el funcionamiento y
rendimiento de este teléfono móvil. Aunque este manual fue
elaborado a conciencia y con mucho cuidado, Duo ni ninguna
empresa afiliada, asume responsabilidad por cualquier error o errores
contenidos en este documento. Duo y el logotipo de Duo son
marcas registradas de Duo. El resto de las marcas comerciales son la
propiedad de sus respectivos dueños.
Funciones de las Teclas
[Tecla de Función Izquierda]
Oprima esta tecla para ingresar al menú principal
Oprima esta tecla para confirmar una función
Oprima esta tecla para contestar una llamada
[Tecla de Función Derecha]
Oprima esta tecla para abrir los contactos
Oprima esta tecla para regresar a la pantalla
Oprima esta tecla para rechazar una llamada
[Tecla de OK] Oprima esta tecla para confirmar una función y para ingresar
al menú principal. Oprima y aguante esta tecla para utilizar la linterna.
[Tecla de Llamadas] Oprima esta tecla para iniciar una llamada
Oprima esta tecla para contestar una llamada Oprima esta tecla para
revisar el registro de llamadas.
[Tecla de Finalizar] Oprima esta tecla para terminar una llamada.
Oprima y aguante esta tecla para apagar el teléfono.
Para encender el teléfono oprima y aguante esta tecla
Oprima esta tecla para regresar a la pantalla inicial.
[Teclas de Navegación]
Oprima esta tecla para mostrar las opciones y funciones disponibles.
En ciertas pantallas, esta tecla se puede utilizar para navegar. En
modo de espera puede utilizar estas teclas para abrir ciertas pantallas.
Estas teclas se pueden programar. Durante una conversación, puede
oprimir la tecla hacia arriba o hacia abajo para ajustar el volumen.
[Teclas Numéricas]
Oprima las teclas numéricas, del 0 al 9, para ingresar números y
caracteres. Oprima y aguante las teclas numéricas para efectuar
marcación rápida. La tecla # y la tecla * corresponden a diferentes
funciones dependiendo de la pantalla o el menú. En función de
reproductor de audio o radio FM la tecla * baja el volumen y la tecla
# aumenta el volumen. La tecla # también la puede utilizar para
cambiar de perfil.
Para Comenzar
1. Instalar la Tarjeta SIM y la Batería
Inserte con cuidado la tarjeta SIM, con los conectores dorados
hacia abajo, en la ranura.
Alinee la tarjeta con la muesca de la ranura.
Nota: Para no dañar la tarjeta SIM asegúrese de apagar el teléfono
antes de instalar o retirar la tarjeta
2. Retirar la Batería y la Tarjeta SIM
Antes de retirar la batería y la tarjeta SIM asegúrese de que el
teléfono este apagado.
3. Como Cargar la Batería
Toma aproximadamente dos horas y media para cargar la bacteria.
La carga restante de la batería se muestra en pantalla por medio
del icono que aparece a la derecha de la pantalla en la esquina
superior. Cuando se está cargando la batería, una animación
aparece en pantalla. Cuando la batería ha terminado de cargar, la
animación desaparece. Mientras que es carga la batería es normal
que el teléfono, la batería y el cargador se calienten.
Nota: La batería se tiene que cargar en un lugar con propia ventilación
y con una temperatura entre -10℃~+55℃. Si la temperatura está muy
alta o muy baja, el teléfono le mostrara un aviso.
Solo se pueden utilizar baterías, cargadores y accesorios aprobados
por el fabricante. ¡El uso de una batería, cargador o accesorios no
aprobados podría dañar el teléfono móvil y causar daño!
4. Encender y Apagar el Teléfono
Para encender o apagar su teléfono, mantenga oprimida la tecla
de Finalizar hasta que encienda la pantalla y aparecerá la
animación de inicio o se apague la pantalla. Si intenta encender el
teléfono sin una tarjeta SIM instalada, el teléfono mostrara el
mensaje “Instale la tarjeta SIM”. Al encender el teléfono pudiera
ver uno de estos mensajes:
Ingrese su clave – si ha programado una clave la tiene que ingresar
aquí Ingrese el Código – tiene que ingresar el código de la tarjeta
SIM Buscando – el teléfono está buscando automáticamente la
red local
2 Llamada de Emergencia
Aunque no tenga una tarjeta SIM instalada, puede realizar
llamadas de emergencia con el teléfono.
En la pantalla vera un mensaje “Llamada de emergencia” para
indicar que solo puede realizar ese tipo de llamadas.
3 Como contestar una llamada
Oprima la tecla de marcación para contestar una llamada. Si tiene
un audífono de manos libres puede contestar una llamada por
medio del botón del audífono. También, con el audífono manos
libres conectado, puede activar la función de contestación
automática para contestar la llamada en cuanto entra. Si tiene
activada la función de contestar con cualquier tecla puede oprimir
cualquier tecla, menos [Tecla de Finalizar] y [Teclas de
Navegación] para contestar una llamada.
4 Registro de Llamadas
El teléfono mantiene un registro de llamadas que incluye la última
llamada perdida, llamadas recibidas, llamadas realizadas, tiempo
de la última llamada, tiempo total en uso.
5 Opciones durante una Llamada
Durante una llamada aparecerá el mensaje “Opciones” en
pantalla que le mostrara las opciones disponibles*.
Función de altavoz
Poner llamada actual en espera
Abrir pantalla de contactos
Abrir registro de llamadas
Abrir menú de mensajes
Grabar llamada actual
Silenciar llamada
Llamada multipartita
Llamada en espera
* Algunas funciones dependen de su red o proveedor local.
Menú de Funciones
1 Como Seleccionar Opciones
Desde la pantalla en espera puede oprimir la tecla de función
izquierda para abrir el menú de funciones o si está en una llamada
puede seleccionar “Opciones” para abrir el menú de opciones
durante una llamada. Utilice la tecla de navegación para
seleccionar la opción deseada. Para salir del menú oprima la tecla
de función derecha o la tecla de finalizar para regresar a la pantalla
en espera.
2 Lista de Funciones
1 Registros de llamadas
2 Contactos
3 STK(Herramientas
para SIM)
4 Multimedia
4-1 Cámara
4-2 DV
4-3 Audio
4-4 Video
4-5 Radio FM
4-6 Grabadora
4-7 Imágenes
4-8 Snake (juego)
5 Mensajes
5-1 Escribir mensaje
5-2 Bandeja de entrada
FCC Statement
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates
and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation.
Note: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this
equipment. such modifications could void the user’s
authority to operate this equipment. Any Changes or modifications
not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
5-3 Bandeja de salida
5-4 Borrador
5-5 Correos enviados
5-6 Bandeja de entrada
con seguridad
5-7 Plantilla
5-8 Difundir mensaje
5-9 Correo de voz
6 Perfiles
6-1 Normal
6-2 Silencio
6-3 Interior
6-4 Exterior
7 Herramientas
7-1 Whatsapp
7-2 Mis archivos
7-3 Alarma
7-4 Calendario
7-5 Bluetooth
7-6 Calculadora
7-7 Reloj Mundial
7-8 Ebook
7-9 Linterna
8 Internet
9 Ajustes
9-1 Ajustes de
llamadas
9-2 Ajustes del
teléfono
9-3 Pantalla
9-4 Seguridad
9-5 Conexiones
SAR Statement
This Phone meets the government's requirements for exposure to
radio waves. The guidelines are based on standards that were
developed by independent scientific organizations through
periodic and thorough evaluation of scientific studies. The standards
include a substantial safety margin designed to assure the safety of
all persons regardless of age or health.
FCC RF Exposure Information and Statement The SAR limit of USA
(FCC) is 1.6W/kg averaged over one gram of tissue. This device has
also been tested against this SAR limit.
Detail SAR information of this device can be viewed on-line at
http://www.fcc.gov/oet/ea/fccid/.
Please use the device FCC ID number for search. This device was
tested for typical body-worn operations with the back of the handset
kept 1.5cm from the body. To maintain compliance with FCC RF
exposure requirements, use accessories that maintain a 1.5cm
separation distance between the user's bodies. The use of belt clips,
holsters and similar accessories should not contain metallic
components in its assembly. The use of accessories that do not satisfy
these requirements may not comply with FCC RF exposure
requirements, and should be avoided.
FCC ID:O55M112X2
Specifications
Duo Shark
Descripción
Memada*
Memada Externa
Celular
Pantalla
Cámara
Inalámbrica
Conectores
Multimedia
Audio**
Video**
Fotograbas
Batería
Entrada/Salda
Dimensione/Peso
Specifications are subject to change without prior notice.
* Actual storage may be less due to device software.
** Certain bitrates, resolutions, and/or file variations may not be compatible.
Feature Phone
32Mb(ROM) + 32Mb(RAM)
Ranura microSD (max. 32GB)
GSM Quad-band, GPRS/WAP
Pantalla a color de 1,77", Resolución: 128 x 160
VGA
Bluetooth
USB Micro 2.0 (para cargar)
Parlante y micrófono
Radio FM, Reproductor MP3
Reproductor de video
Galería de fotos
800mAh Li-ion
Entrada: CA 110-220V
Salida: CD 5V@500mA
111.4×46.0×14.0mm/66g.