Do not use the phone in situations where it might cause danger.
Transportation Safety
Please observe all transportation laws and regulations.
Please drive with both hands on the wheel.
DO NOT TEXT AND DRIVE
Hospitals
Please follow limitations.
Please turn off your mobile phone when near medical instruments.
Airports
Remember to follow all airport and flight safety regulations.
4
Please do not use your phone during flight.
Toxic Chemicals
Do not use your mobile phone around fuels or chemicals.
Hazard
Do not use in hazardous areas where explosions may occur.
Accessories and Batteries
Use only ELITE 6R PLUS authorized batteries and accessories.
Backup
Remember to keep a written record of all important information.
Water
Your phone is not waterproof. Keep it away from water and liquids.
SOS Emergency Calls
Make sure your mobile phone is switched on and in a service area. In home screen, tap the
phone key and dial 911 and send.
5
Appearance and Key Function
Receiver
Front camera
Volume
Power
Home
Menu
6
Back
Rear Camera
Flash
Battery
cover
Speaker
7
Introduction
Installation of the SIM Cards
Note: Please keep the SIM card
are easily damaged due to scratching or bending. Please be cautious when carrying,
installing or taking out the SIM cards. SIM: Contact your cellular phone service provider directly to obtain the SIM card.
To insert SIM cards:
1. Remove the rear cover. Insert the SIM card(s).
2. Insert the SD card. (For additional storage capacity)
out of the reach of children. The SIM card and its contacts
8
Memory Card
SIM Slots
3. Replace the rear cover of the phone and power on.
9
Power On and Off
On - Please ensure the SIM card has been properly inserted into the phone. Long press the Power key to switch on the phone.
Off - In standby mode, long press on Power key until an options menu appears. Select Power Off in the menu and confirm.
Security
You may set a security lock feature as a security measure for the phone. For further
information regarding password locks, password revision and other functions please enter
into the security option in system settings.
Call Functions
At the dial keyboard, enter the phone number and then click the dial key. If dialing an
extension, you may click the dial pad icon in the bottom of the screen to open the interface
and enter the number of the extension. You may also press and hold the 0 key to add a (+)
sign when adding an international dialing prefix.
10
11
Call history
Every telephone number called and received will be saved in the history. All numbers in the
history can be dialed directly by clicking the Redial on the screen. When the number
appears on the list, click it to view details.
Call Options
There are different options that can be used in the history and dialing interface. You may
press the MORE while in the dial interface and adjust speed dial and call settings. In the
dialing interface, you may press the search button to browse through contacts list or set
default contact resources.
Contacts
Enter: Click on the applications menu and select contacts.
• The default display is the phone contacts and SIM card contacts.
• The contacts are organized alphabetically by default.
12
Options
Add Contact
13
Add New Contact
1. Click the add contact icon to add contact.
2. Select to save your contacts to the Google account, the phone or the SIM card.
3. You may enter different contact details which include adding a picture, name, telephone
number, group, address, and email among other options.
4. Click to finish and save contact.
14
15
Messaging
You may use this function to exchange text messages and multimedia messages with your
family and friends. The messages to and from the same contact or phone number will be
saved into a single conversation so you may see the entire message history conveniently.
Send an SMS
Application Menu » Messaging » New message (or shortcut icon)
1. Click to enter recipient (You may enter contacts from contact book or enter a new
number)
2. Compose Message
3. Send
Send an MMS
When creating message, the default message style is SMS. The message will
automatically convert to MMS when adding an attachment.
1. Click the attachment icon in the messaging interface.
2. Click to add attachments and create an MMS message.
16
Attachment Type for
MMS Message
17
Internet Browser
Menu Functions
Backward
• After browsing through multiple pages, this option will return the user to the
previous page.
Forward
• After browsing through multiple pages, this option will move to a web page after
the current page.
Windows
• You may view all windows open by clicking the windows icon in the upper right
part of the browser.
Bookmarks
• Click the save to Bookmarks option to make the current URL as a saved
Bookmark.
History
• Click History to open saved bookmarks.
18
More
Find on page: Search current page.
Share page: Select to share the current page.
Save for offline reading: Saves page for offline reading.
Settings: Contains a variety of browser settings.
19
Bluetooth & Wi-Fi
Bluetooth is a short-range wireless communications technology that devices can use to
exchange information and connect to different types of devices which include headsets and
other devices.
Power on Bluetooth
1) Settings » Bluetooth and select to power on bluetooth.
2) The bluetooth icon will appear in the notification bar. Click “scan for devices” and the
phone will start to scan for all devices within range.
3) In bluetooth settings all the devices found will displayed in the list under the icon.
20
List of available devices
Power on Wi-Fi
1) Settings » Wi-Fi and select ON to power on Wi-Fi
2) Click on the desired Wi-Fi network to be connected. Unsecured networks can be
connected to directly - secured networks require a password or credentials prior to
connection.
21
List of available networks and the network
connection screen
22
Camera
Camera
Prior to use: Insert SD card before using the camera or video camera. All photos or videos
taken by the phone are typically stored in the memory card for large storage capacity of
images.
Open Camera
1. Applications Menu » Camera
2. Switch to video mode if you want to record videos.
Note: You may place a camera shortcut icon on any of the screens
Take Pictures
1. Aim the object that the picture will be taken.
2. Press the “Shutter” button on the screen.
3. After taking the picture, the file will be saved in the camera’s gallery folder.
4. You can view the photos by clicking the preview box button.
You may adjust various settings for the camera by pressing Menu while in the
23
camera interface. When in the camera viewfinder mode, you can switch to video
or photos’ gallery.
Settings
Select between Camera &
Video
24
Gallery
Open Images
Applications Menu » Gallery
Pictures and videos are
stored in separate albums
25
Share Pictures
You may share pictures by sending them through different types of installed applications.
You may also send pictures through the MMS message function by composing a message
and attaching the picture. Any image can also be sent via the Bluetooth function by
selecting Bluetooth equipment that has been paired.
Adjust Image
Press Menu and Edit to adjust images
You may select from different effects that may include: Vintage, Black and White, Instant,
Latte, Litho, X-Process, Crop, Rotate, Mirror, Straighten, Vignette, Contrast, Exposure,
Auto color, Shadows, Vibrancy, among other settings that can be used to adjust picture
images.
View Images
In the picture interface, click on an album to view images
In the photo album, scroll the picture towards left to view the next picture or towards right to
view the previous one.
26
Crop Pictures
If you want to adjust the size of the picture, use the crop tools. Once the arrow appears,
pinch your fingers in or out to adjust the size. If you want to adjust the image and keep its
proportion, please hold down any of the four corners of the image and adjust accordingly.
Music
Open Music
Application Menu » Music
27
Song Status
Track Controls
Search Music
You may choose to search for music from media folder through artist name, song name,
album name. The following formats are available: AMR, MIDI, MP3, WAV, and OGG.
28
Sound Recorder
The Sound Recorder can record voice or any audio.
You may send any recorded audio via Bluetooth or MMS and also have the option to make
any recorded audio the phones default ring tone.
The recorder uses 3GPP format.
Record
-Keep the phone’s microphone near the voice source.
-Click the record button to record the audio.
-Click the stop button to stop recording the audio.
29
Recording Time
Recording
Controls
All recordings will be saved in the recording folder in the default music program and can be
accesse
30
Alarm Clock
1. Click on the Clock icon in the application menu
2. Click set alarm button and enter the alarm clock set interface where you may delete and
edit alarms
Click to edit or delete
alarms
Click to add alarms
31
FM Radio
FM Radio
Through this function, you may listen to FM radio on the device. The FM radio uses the
wired headphones as an antenna in order to receive signal. Before using this function,
connect the original equipment headphones that came with the phone.
Open FM radio
Press the FM Radio icon to open the application.
1. Click “Search” automatic scans of FM channels.
2. Click to add favorite radio stations.
FM Radio as Background
Click on the Home key to move the FM Radio to the background.
32
Add Favorite Radio
Scan
Stations
33
Settings
Wi-Fi
Settings » Wi-Fi to power on. When on, the Wi-Fi will automatically search for available
networks. Any unsecured network can be used directly and any secured network requires
a password or credentials prior to connection.
Bluetooth
• Press the switch to power on Bluetooth. Once on, the Bluetooth will automatically
scan for any nearby open equipment.
HotKnot
• Press the switch to power on HotKnot. When on,allow data exchange when the
screen touches another device .
34
SIM cards
• Press the switch to power on SIM cards. When insert two cards, click to set
cellular data、Calls、SMS messages.
Data Usage
• Mobile and Wi-Fi Data Usage
More
• Airplane Mode
• Default SMS app
• Tethering, Portable Hotspot
• VPN
• Cellular networks
35
Note: When in flight mode, all network connections will turn off automatically.
Display
• Brightness, Auto rotating screen, Wallpaper, Screen Timeout.
Gesture Settings
• Fingers Gesture
• Gesture Motion
• Smart Motion
Sound & notification
This option sets the phone tone settings for receiving calls and notifications. Some of the
settings include:
• Vibrate, volume, ring tones, ring tones notification, dial touchpad, and haptic
feedback and tones
36
Storage
• View the SD card and phone memory usage.
• Allows the removal or formatting of the SD card.
.
Battery
• Click to switch to power saving mode
Apps
• Manage applications - Manage and delete installed applications.
• Running services - Press the ‘Force Stop’ button to stop any of the services listed
and removes from the running services list.
Location
•Mobile Network Location - Use wireless services to find locations in
applications.
37
• When using the GPS, power on to set satellite positioning for accuracy.
Security
Set up screen locks: Use slide, face/voice unlock, pattern, PIN or password to lock the
screen.
• Pattern: The first time there will be simple unlock instructions and examples. Click
“next step” to continue the security pattern step.
• PIN: Enter PIN number to unlock the screen.
• Password: Use password to unlock the screen
You may stop the security feature at any time.
Set up SIM card PIN lock
• SIM card PIN (Personal Identification Number) is used to prevent unauthorized
use of SIM card.
To change a blocked PIN code, you will need to unlock the SIM lock then go to the Change
Password screen. The phone will automatically prompt you enter the old PIN code and ask
to enter a new PIN code twice. The phone will then prompt you that the change was
38
successful. If you enter the PIN incorrectly three times, the SIM and PIN codes will be
automatically locked. You will need the PUK code to unlock the phone which is available
through your service provider. If you enter the PUK code incorrectly 10 times, the SIM card
will be permanently locked. Please see your service provider for a new SIM card.
• Password visible – Make the password visible when it’s typed.
• Use security credentials - Allow applications to visit security credentials or other
credentials.
Emergency rescue
• When you are in an emergency,emergency rescue helps you by sending your
emergency contacts a message along with your location.
Accounts
• Add accounts, include Exchange ,Google,IMAP,POP3,facebook,skype,whatsapp.
Language & Input
39
• Language – Change the language of the phone.
• Custom Dictionary - Add or delete words to the custom dictionary.
Inputting words, Predictive text function, Auto-Text, Input keyboard method
Backup & reset
• Backup Data – Will back up all application data, WLAN passwords, and other
settings to Google's servers
• Restore to Factory Settings - Clear all data stored on the phone.
Date & time
• Date and Time adjustment.
• Time Zone - Select Time Zone according to where your location.
• Select Date Format - There are 3 kinds of formats you can choose from:
40
Month-Day-Year, Day-Month-Year and Year-Month-Day, and
Year-Month-Day which is the default setting
Scheduled power on & off
• Schedule power on and off
Accessibility
• Power button ends call and auto rotate screen
• High contrast test and quick boot
• Speak Passwords and large text
Printing
Need to download the "CloudPrint.apk" from the Internet and install.
41
Developer options
• Open debug mode when USB is connected
About phone
• Phone information status and firmware updates
Storage
Connect the phone with the USB cable provided. Once connected, a connection interface
will appear. In the connection mode interface, select MTP and turn on from the connection
screen to be able to transfer files. Other storage options are also available.
42
Some system settings, hardware, and UI options may vary depending on final version.
Additional Information
The information provided in this user manual is subject to change without notice and ELITE
6R PLUS Products reserves the right to modify the manual at any given time. ELITE 6R
PLUS Products has made every effort to ensure that this user manual is accurate and
43
disclaims responsibility and liability for any inaccuracies or omissions. ELITE 6R PLUS
Products makes no commitment to keep current the user manuals, however, does reserve
the right to make improvements to the user manual at any given time without notice.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
44
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Specific Absorption Rate (SAR) information
SAR tests are conducted using standard operating positions accepted by the FCC with the
phone transmitting at its highest certified power level in all tested frequency bands,
although the SAR is determined at the highest certified power level, the actual SAR level of
the phone while operating can be well below the maximum value, in general, the closer you
are to a wireless base station antenna, the lower the power output.
Before a new model phone is a available for sale to the public, it must be tested and
certified to the FCC that it does not exceed the exposure limit established by the FCC,
Tests for each phone are performed in positions and locations (e.g. at the ear and worn on
the body)as required by the FCC.
For body worn operation, this model phone has been tested and meets the FCC RF
45
exposure guidelines when used with an accessory designated for this product or when
used with an accessory that contains no metal and that positions the handset a minimum of
1.0 cm from the body.
Non-compliance with the above restrictions may result in violation of RF exposure
guidelines.
46
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.