SWAGTEK 504019 User Manual

ACCESSORIES:

QUICK GUIDE / USER MANUAL

4.1

QUICK GUIDE

USER MANUAL

logicmobility.com

Made in China

Warranty Certiﬁcate Terms and Conditions

LOGIC warrants that their Products will be free from defects in material and workmanship. The warranty period is one (1) year for the products and three (3) months for the accessories which are part of the original package including the battery. The warranty period begins the date of purchase by the End-User who shall present an invoice or a purchase receipt when requiring warranty service otherwise the warranty period will begin from the date of manufacture of the product. LOGIC will repair a product without cost to the customer if it presents a manufacturing defect or defect in workmanship during the warranty period and if the defect occurred under normal conditions of use in accordance with the instructions and specifications stated in the user’s manual.

For additional information about the terms and conditions

of LOGIC‘s Limited Warranty or to

obtain warranty service information, please visit the support section at: logicmobility.com

Certificado do Garantía Términos y Condiciones

LOGIC garantiza que sus productos estarán libres de d efectos de materia prima y ensamblaje. El período de garantía es de un (1) año para los productos y de tres (3) meses para Ios accesorios que forman parte del paquete original incluyendo la batería. El usuario ﬁnal deberá presentar una factura o un recibo de compra cuando exija el servicio de garantía, de lo contrario el período de garantía comenzará a partir de la fecha de fabricación del producto. LOGIC reparará un producto, sin costo para el cliente si presenta un defecto de fabricación o un defecto de ensamblaje durante el período de garantía y si el defecto se produjo en condiciones normales de uso de acuerdo con las instr

ucciones y especiﬁcaciones

indicadas en el manual del usuario.

Para más detalles de la Garantía Limitada de LOGIC y para obtener información del servicio de garantía, por favor visite la sección de soporte en nuestro sitio web: logicmobilitycom.

Conecte su teléfono Logic a una computadora utilizando el cable USB.

Transfiera sus archivos de música desde su computadora a su teléfono Logic.

Instalar tarjeta SIM / tarjeta de memoria.

Conozca su teléfono Logic.

Gracias por haber adquirido este innovador producto de LOGIC. Las especificaciones en este manual están sujetas a cambios sin previo aviso.

LOGIC y el logotipo de LOGIC son marcas registradas de Swagtek, Inc. El resto de las marcas comerciales son propiedad de sus respectivos dueños.

Cargue por 24 horas antes de usar.

QUICK GUIDE | GUÍA RÁPIDA

X50

Thank you for purchasing this innovative LOGIC device. The specifications in this document are subject to change without notice.

LOGIC and the LOGIC logo are registered trademarks of Swagtek, Inc. Other trademarks are the property of their respective owners.

Install SIM card / memory card.

Get to know your Logic phone.

Connect your Logic phone to the computer using the USB cable.

Copy music files from your computer to your Logic phone.

Charge for 24 hours before using.

AUDIO JACK

3.5 MM

MICRO USB PORT

270mm

100mm

CLOSE FINISHED SIZE: 67.31mm X 95.758mm

SHEET - FRONT SIDE

OPEN SIZE WITH BLEED: 100.33mm X 271.272mm

SHEET - BACK SIDE

OPEN SIZE WITH BLEED: 100.33mm X 271.272mm

CLOSE FINISHED SIZE: 67.31mm X 95.758mm

123

5” 3G SMARTPHONE

VOLUME +/-

POWER /

LOCK KEY

CAMERA

5” TOUCHSCREEN

VOLUMEN +/-

ENCENDER/ BLOQUEAR

ENTRADA DE AUDIO 3.5 MM

PUERTO MICRO USB

PANTALLA TÁCTIL DE 5”

SIM1

SIM2

SIM1

SIM2

FLASH

CÁMARA

FLASH

FCC Statement

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause

undesired operation.

2. Changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

SAR Information Statement

Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. * Tests for SAR are conducted with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone when tested for use at the ear is 0.533W/Kg and when worn on the body, as described in this user guide, is 1.151W/Kg(Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements). The maximum scaled SAR in hotspot mode is 1.185W/Kg. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RFexposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/ oet/fccid after searching on

FCC ID: 055504019 Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Asso-ciation (CTIA) web-site at http://www.wow-

+ 1 hidden pages