SWAGTEK 005017 User Manual
47mm
47mm
Using Amazon Echo
Mini Smart Socket
Instructions
Quick Guide
Parameters
• Product: Mini Smart Socket
• Model:Mini Wi-fi Plug
• Rated Voltage: 120V
• Rated Current: 10A (Max.)
• AC Frequency: 50/60Hz
Power Socket
On/Off Button
Press Long Time,
Restore to Factory Settings.
Preparation
• Amazon Alexa APP
• Amazon Alexa account (users need to register
their own account)
• Smart Life APP
• Smart Life APP account (users need to register
their own account, select region as “The United
States”.)
• Echo, Echo Dot, Tap and other Amazon
voice-operated devices
• Our smart device (For example, smart plug)
Rename the device after configuring successfully,
and then name of the device is recommended to
use English words which easy to pronunciation.
Part 1: Download & Registration
• Scan the QR code to download “Smart Life” app
or search and download app directly from APP
Store or Google Play.
• Enter the register/login interface; input the phone
No. / Email and password to login, or tap at the
bottom of page connected to related authorization
interface, input the phone No./Email for getting
verification code to register.
• Note: Our APP only supports 2.4 GHz WI-FI networks.
Smart Life - Smart Living
Yu xiang >
Set your Echo speaker
by Alexa APP
• Sign in with Alexa account &
password (If not have, sign
up first). After login, click the
menu at the top left, then
click the “Settings”, and
choose “Set up a new device”.
• Choose a device (for example,
Echo). When the right page
appears, long press the small
dot on your Echo device until the
lights turn to be yellow. Then
click “Continue” on APP. (Note:
at this time the mobile phone
can not open VPN software.)
Echo Setup
Wait for the orange light ring
Make sure your Echo is plugged into a power outlet.
in about a minute,Echo will tell you that it is ready and
the light ring will turn orange. Then con�nue.
Con�nue
cancel setup
Don’t see the orange light ring?
Part 2: Add Plug
Preparations :
The socket default setting is turned off, Long press
on/off button about 5s until indicator light quickly
flashes, then open the APP to enter “Home”
interface.
• Make sure the phone connect with WIFI
successfully.
• Tap “add device” or the icon “+” at the right
corner of interface to add device
• Tap “Confirm indicator rapidly blink”.
• Input WIFI password, then tap “Confirm”
• Wait for configuring successfully, then tap “Done”.
• User could rename the device through tapping
the top right icon “...”
• Choose user’s WiFi and wait for a few minutes.
• After an introduction video, click next step. It will
go to “Home” page automatically. Now the echo
connected to Alexa APP through WIFI successfully.
Enable our skill in Alexa APP
• Choose “Skills” in the options bar, and then search
“ Smart Life” in the input box; Select “Smart Life” in
the search results, and then click “Enabled Skill”.
(Note: There will be the interface on the right, which
indicates that the account has been bound. If there
is more than one test, you can click the “Disable
Skill” to remove the binding, and then click the
“Enable Skill” to continue to bind a new “Smart Life
account”.)
( As the picture shows )
Start your smart life
Add Device
Experience center >
• Input the user name
and password that you
had previously registered
(Only support the account
in the United States).
When you see the right
page, it means that the
Alexa account linked with
Smart Life account.
Alexa has been
successfully linked with
Smart Life.
You can now close this window,return to your Alexa
app and run discovery to find your new devices.
Part 3: Profile
Profile is the entrance
for the user to manage
personal information,
mainly show the following
information (see chart):
Tap to set your name
Scenes
Device Sharing
Message Center
Integration
Experience Center
Scan QR Code
FAQ
Feedback
About
Control Device via Alexa APP
After the previous operation
is successful, you can control
socket via Echo.Discover
device: Firstly, users need to
say to Echo: Echo (or Alexa),
discover my device,” Echo
will start to find the device
which added in Smart Life
APP, it will take about 20
seconds to show the result.
Or click “Discover devices”
in Alexa APP, it will show
the devices that found
successfully.
Your Groups
Use groups to control multiple devices at a time.
you don’t have any groups yet.
Your Devices
Devices that Alexa has discovered and can control.
Alexa found 2 Smart Home
devices.
Lily (Offline)
Smart Bulb
Lucy tv (Offline)
Smart Socket
Notice
• Please check if there is damage caused by
transportation. If broken, please contact supplier
for replacement.
• Please follow the specification instruction and
notice to keep product in a good and safe use
condition.
• Put the socket in proper condition and out of
reach of children.
• Plug in fully to the socket when using.
• The total power of being electric connected
appliances could not bigger than the
maximum power of the socket.
• Do not disassemble or reinstall the socket,
otherwise it may cause security risks.
Note: “Echo” is one of the wake-up names, which
can be any of there three names (Settings): Alexa/
Echo/Amazon.
• Support Skill List
Create group
Users can control devices by instructions like below:
Alexa, turn on [bedroom socket]
Alexa, turn off [bedroom socket]
Discover devices
Note: The name of the device must be consistent
with the addition of Smart Life APP.
Forget
Forget
Control Device via Alexa APP
1.This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1)This device may not cause harmful interference,
and (2)This device must accept any interference
received, including interference that may cause
undesired operation.
2.Changes or modifications not expressly approved
by the party responsible for compliance could void
the user’s authority to operate the equipment.
FCCRadiationExposureStatement
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. In
order to avoid the possibility of exceeding the FCC
radio frequency exposure limits, Human proximity to
.
the antenna shall not be less than 20cm (8 inches)
during normal operation
NOTE
This equipment has been tested and found to comply
with the limits for a Class B digital, pursuant to Part 15
or the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in
a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if
not installed and used in accordance with the
instructions, may casue harmful interference to radio
communications, However, there is no guarantee that
interference will not occur in a particular installation.
If the equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
--- Reorient or relocate the receiving antenna.
--- Increase the separation between the equipment
and receiver.
--- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
--- Consult the dealer or an experienced radio/ TV
technician for help.
Loading...