91450
Please read the following instructions
and warnings carefully.
KEEP THIS INSTRUCTION MANUAL
FOR FUTURE REFERENCE.
For technical support, contact us at (401) 671-6551
or www.summerinfant.com/contact
Ages: Birth until infant begins to push up
on hands and knees, roll over or becomes
too active to remain in product.
Adult assembly required.
By Your Side™ Within Reach
INSTRUCTION MANUAL
Thank you for purchasing the By Your Side™ Within Reach from SwaddleMe. Offers a
safe way for baby to sleep next to you. Provides a cozy and comfortable environment
with drop-down side for easy access to baby. Moms love its breathable mesh sides,
sturdy, padded metal frame, adjustable incline and removable, washable sheet.
Please retain information
for future reference.
Colors and styles may vary.
MADE IN CHINA.
10/17
Summer Infant (USA), Inc.
1275 Park East Drive
Woonsocket, RI 02895 USA
(401) 671-6551
© 2017 Summer Infant (USA), Inc.
Summer Infant stands behind all of its products. If you
are not completely satisfied or have any questions,
please contact our Consumer Relations Team at
(401) 671-6551 or www.summerinfant.com/contact
connect with us:
• Fitted Sheet: 100% Polyester. Machine wash warm with like colors. Use
non-chlorine bleach only if needed. Tumble dry, low heat.
• Sleeper Pad & Frame: Wipe clean with a damp cloth. Air dry.
• Do not use sleeper if any components are damaged or broken.
to clean:
maintenance:
WARNING:
Prevent possible strangulation or entanglement.
Never use sleeper sheet unless it fits securely on sleeper pad.
drop-down side:
Drop-down side easily lowers
after sliding the button and
provides easy-access to baby
Pull slide button and
push down side bar of
sleeper to lower
Side bar will return to
original position when
button is released
IMPORTANT –
Read the instructions carefully before use and keep them for future reference.
WARNING –
Do not leave child unattended.
FALL HAZARD –
To help prevent falls, do not use this product when the infant begins to
push up on hands and knees or has reached 15lbs (6.8kgs), whichever comes first.
SUFFOCATION HAZARD – Infants have suffocated:
• In gaps between extra padding and side of the sleeper.
• On soft bedding.
NEVER add a mattress, pillow, comforter, or padding.
Use ONLY the pad provided by Summer Infant.
• Do not use this product if the adult mattress is not firm enough to allow the product to lie flat
when adults are on the bed.
• To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs
to sleep, unless otherwise advised by your physician.
• NEVER use on a water mattress.
• NEVER move, lift or transport sleeper while child is in it.
• NEVER place unit on an elevated surface other than bed.
• NEVER use this product in a motor vehicle.
• NEVER use near stairs.
• NEVER leave child unattended.
• NEVER use product on a stand.
• NEVER place the product within 12 inches of the edge of the bed.
• ALWAYS use on flat, stable surfaces.
• ALWAYS keep product away from hazards that may injure your child.
• DO NOT use if any part is broken, torn or missing.
• DO NOT let other children play unattended near the sleeper.
• This product is only suitable for a child who cannot sit up unaided, roll over and cannot push itself up on
its hands and knees or becomes too active to remain in product.
• Use ONLY replacement parts supplied or approved by Summer Infant.
• Be aware of the risk of open fire and other source of strong heat, such as electric bar fires, gas fires, etc.,
in the near vicinity of the sleeper.
• If a sheet is used with the pad, use only the one provided by Summer Infant or one specifically designed
to fit the dimension of the sleeper pad.
• Inspect product regularly for signs of damage and wear.
STRANGULATION HAZARD: Strings can cause strangulation! Do not place items with a string around a
child’s neck, such as hood strings or pacifier cords. Do not suspend strings over sleeper or attach strings
to toys. AVOID CO-SLEEPING HAZARDS:
• NEVER allow infant to sleep in the product while sharing a bed with another toddler or child.
• NEVER allow infant to sleep in the product while sharing a bed with an adult who is under the influence of
alcohol or medication. These substances increase the risk of rolling onto the infant and make it harder for
the adult to wake up at the baby’s distress.
• NEVER allow infant to co-sleep with an obese person.
• NEVER allow infant to sleep in the product while sharing a bed with an adult who has sleep disorders (i.e.
sleepwalking, nightmares, fitful sleep).
• NEVER use the product if it DOES NOT LIE LEVEL on the mattress when both parents are on the bed.
• ALWAYS place the product against the headboard when co-sleeping.
• NEVER use the product anywhere else in the bed. Make sure that adult bedding does not cover the
product when bedding is fully extended, in order to reduce suffocation risks and overheating.
• NEVER use more than one pillow per adult on each side of the product.
WARNING:
FAILURE TO FOLLOW THESE WARNINGS AND THE
INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.
2
7
1
set up:
features & components:
Padded Metal Frame
Provides head-to-toe protection
from parental rollover.
Mesh Sides
Provides breathability and
clear view of baby.
Soft, Comfortable
Fabrics
Removable Mattress Pad
and Fitted Sheet
Made with soft, comfortable fabrics.
Sleeper Frame:
inserting the wedge and mattress:
Unfold the
sleeper to lay flat.
Unfold two
rotating end tubes.
Mode 1: Flat
Mode 2: Incline
Wedge can be placed
into the product in
two ways: Incline Mode
or Flat Mode
Unfold mattress
and place on
top of wedge
IMPORTANT:
Mattress should always
be placed on top of
wedge.
!
IMPORTANT: When
used in flat mode,
wedge should be stored
at childs feet.
!
6
7
Drop-Down Side
Easily lowers after pressing
button to provide easy-access
to baby and automatically
returns to upright position for
safety.
Incline Wedge
Nests within product to be used
in inclined or flat position.
2
nd
1
st
3
6
click!
click!
4
5
2
3
set up (continued):set up (continued):
Connect the frame
with rotating end
tubes by clicking
valco pins into place.
Flip sleeper
into upright
position.
click!
2
nd
1
st
4
5
Connect top then
bottom tubes before
connecting ends.
Fasten velcro
covers on
either side
x 2
Set valco pins
until they rest
against tube.
Engage BOTH
sides, then
press pins
in together.
Loading...