Page 1
SPECIALISED WIRING ACCESSORIES LTD
Operating Instructions - SSTCT1
Suitable for the tensioning and cutting of SWA range of stainless steel cables
Push lever up to
cut excess tie
Abbey Mills Charfield Road Kingswood Wotton-Under-Edge Glos GL12 8RL
Tel: 01453 844 333 Fax: 01453 842 224
E-mail:[email protected] www.swaonline.co.uk
The cable tie gun is intended for use on stainless steel ties only.
1. Fasten the tie by feeding the tail through the buckle, and securing, if appropriate.
(Roller-ball ties automatically secure once the tail is fed through the buckle)
2. The tail of the tie is to be fed through the head of the tool from the front as indicated in
the illustration above. Press handles together and continue to do so until the tie is fully
tensioned.
3. To cut the tail of the tie, push the lever upwards fully – thus leaving the tail of the tie flush
with the buckle.
SWA cannot accept liability for faults or injuries through misuse of the tool.
Issue date: July 2015 Page 1 of 1
Loading...