s&w 945 User Guide

Read the instructions and
warnings in this manual
CAREFULLY BEFORE using
this firearm.
2100 Roosevelt Avenue • Springfield, MA 01104
1-800-331-0852 • Fax: 413-747-3317
www.smith-wesson.com
945 Series
READ THESE INSTRUCTIONS
AND W ARNINGS CAREFULLY. BE
SURE Y OU UNDERSTAND THESE
INSTRUCTIONS AND WARNINGS
BEFORE USING THIS FIREARM.
This SAFETY, INSTRUCTION
and PARTS MANUAL should always accompany this firearm and be transferred with it upon
change of ownership or presented
to another person. A copy of the
SAFETY, INSTRUCTION, & PARTS
MANUAL is available FREE upon
request from:
SMITH & WESSON
CUSTOMER SUPPORT CENTER
2100 ROOSEVELT AVENUE
SPRINGFIELD, MA 01104
TEL.: 1-800-331-0852
E-mail: qa@smith-wesson.com
2
INDEX
SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
BASIC FIREARMS SAFETY RULES . . . . . . . . . . . . . . . .5-6
SAFE STORAGE AND TRANSPORTATION . . . . . . . . . . .7-8
NOMENCLATURE . . . . . . . . . . . . . . . . . . . . . . . . . . .8-9
PREPARATION FOR FIRING . . . . . . . . . . . . . . . . . . .9-10
AMMUNITION . . . . . . . . . . . . . . . . . . . . . . . . . . .10-12
MODEL NUMBER IDENTIFICATION . . . . . . . . . . . . . . . .13
INSPECTING YOUR PISTOL . . . . . . . . . . . . . . . . . . . .14
LOADED CHAMBER INDICATOR . . . . . . . . . . . . . . . . . .15
LOADING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16-17
FIRING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
DECOCKING . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-19
CLEARING MISFIRES . . . . . . . . . . . . . . . . . . . . . . . .19
UNLOADING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
SIGHT ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . 20
FIELD STRIPPING DISASSEMBLY . . . . . . . . . . . . . .20-21
FIELD STRIPPING REASSEMBLY . . . . . . . . . . . . . . . . .22
MAGAZINE DISASSEMBLY . . . . . . . . . . . . . . . . . . . . .23
MAGAZINE REASSEMBLY . . . . . . . . . . . . . . . . . . . . . .23
CLEANING & MAINTENANCE . . . . . . . . . . . . . . . . . . . .24
SERVICE/SHIPPING/PARTS . . . . . . . . . . . . . . . . . .25-26
WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
EXTENDED SERVICE POLICY . . . . . . . . . . . . . . . . . . . .28
EXPLODED VIEWS . . . . . . . . . . . . . . . . . . . . . . . . . .29
NOTES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
WARNINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
3
SAFETY
SAFETY IS YOUR
NUMBER ONE
RESPONSIBILITY!!!!
WARNING: YOU MUST FOLLOW ALL OF THESE SAFETY RULES TO ENSURE THE SAFE USE OF YOUR FIREARM
Safe gun handling is YOUR personal
responsibility at all times. Firear ms are dangerous
and can cause serious injury and death if they are misused or used inappropriately. Safety must be the prime consideration of anyone who owns or handles firearms.
•You are responsible for the firearm at all times.
In owning a firearm, you must undertake full-time responsibility for your firearm’s safety and security. You must protect yourself and all others against injury or death from misuse of the firearm.
Saf
e storage is y
our responsibility.
In particular, you must secure firearms safely from children and unauthorized users. A lock has been provided for your use with this firearm. A lock is not a substitute for safe and secure storage as defined in the “Safe Storage and Transportation” section of this manual.
Accidents are the result of violating the rules of safe gun handling and common sense.
For your safety and the safety of others, never rely on mechanical features alone. Only your
safe gun-handling habits will ensure the safe use of your firearm. This is your responsibility.
•Ne
ver keep ammunition in the same location as
the handgun. Store in a separate and secure
place.
READ
and UNDERSTAND these instructions
before using your firearm.
4
5
BASIC FIREARM
SAFETY RULES
At home, in the field, at the range, or anywhere, the first concern of every firearm owner should be safety. Apply the fol­lowing safety rules in every situation, with any kind of firearm.
BEFORE HANDLING ANY FIREARM, UNDERSTAND ITS OPERA
TION.
Not all firearms are the same. Familiarize yourself with the mechanical features of any firearm you intend to use. If you feel uncertain about any operational aspects of your handgun, please contact Smith & Wesson at 1-800-331-0852 before proceeding with its operation.
•AL
WAYS SAFELY STORE AND SECURE YOUR
FIREARM. Safe and secure storage of your firearm
is one of the most important responsibilities of firearms ownership. It is a full-time responsibility. You must always secure your firearm and ammunition separately so that they are not accessible to children or other unauthorized persons. (See Safe Storage Instructions on pages 7-8.)
•AL
WAYS TREAT EVERY FIREARM AS IF IT WERE
LO
ADED AND WOULD FIRE IF
THE TRIGGER
IS PULLED.Do not take anyone’s word that the
firearm is unloaded – always check for yourself. Never pass your firearm to another person until the cylinder or action is open and you visually check that it is unloaded. Keep your firearm unloaded and safely stored when not in use.
•AL
WAYS KEEP YOUR FIREARM POINTED IN A
SAFE DIRECTION. Never point a firearm at anyone
or anything you do not intend to shoot whether or not it is loaded.This is particularly important when loading, unloading, or field stripping the gun. ALWAYS control the direction of the firearm.
NEVER
PLACE YOUR FINGER INSIDE THE
TRIGGER GU
ARD UNLESS YOU INTEND TO FIRE.
Your firearm cannot fire unless the tr igger is pulled. Ensure that other objects do not actuate the trigger.
•AL
WAYS BE SURE OF YOUR TARGET AND WHAT
IS BEYOND IT. Always be sure of where the bullet
will strike and shoot only where there is a safe backstop free of obstructions, water or other surfaces which can cause ricochets. Do not fire into the sky.
WARNING!
THE F AILURE T O FOLLOW THESE BASIC FIREARM SAFETY RULES MAY RESULT IN AN UNINTENDED DISCHARGE WHICH COULD CAUSE SERIOUS PERSONAL INJURY OR DEATH.
6
BASIC FIREARM SAFETY RULES CONT’D.
ADDITIONAL IMPORTANT SAFETY RULES
Never carry or store a firearm with the hammer or striker in
the cocked position.
Do not allow a firearm to be used by individuals who have
not read these basic firearms safety rules and do not under­stand its safe operation and the rules of safe gun-handling.
Be sure all accessor ies, such as holsters and grips,
are compatible with the firearm and that the accessories do not interfere with safe operation.
Use the correct ammunition for your particular
firearm as indicated by the marking on the barrel. Never use non-standard, reloaded, or “handloaded” ammunition which has not been subjected to internal ballistic pressure testing.
Discharging firear ms in poor ly ventilated areas,
cleaning firearms, or handling ammunition may result in exposure to lead and other substances known to cause birth defects, reproductive harm, and other serious physical injury. Review the warnings and labels for all ammunition and cleaning products carefully. Have adequate ventilation at all times. Wash hands thoroughly after exposure.
Never use alcohol or drugs before or while shooting.
Do not use your firearm if you are on any medication which impairs, even slightly, your mental or physical ability.
Wear eye and hearing protection appropriate for
firearm use every time you discharge your firearm. Make sure others in the vicinity of where you will be shooting do so as well.
Do not allow any alteration or replacement of parts in
your Smith & Wesson firearm unless performed by a qualified gunsmith using genuine Smith & Wesson parts. If you do otherwise, improper functioning of your firearm may occur and serious injury may result.
Never cross obstacles such as fences or streams
with a loaded firearm.
Firear m safety training is available. Contact your dealer for
availability.
Appropr iate use for your firearm means using your firearm
for legal purposes. For example - target shooting and lawful resistance of deadly criminal force.
These are basic firear ms safety rules. There are other
common sense safety rules that should be followed at all times under the circumstances then presented.
SAFE USE OF A FIREARM IS YOUR PERSONAL RESPONSIBILITY AND THE FAILURE TO FOLLOW ALL OF THESE BASIC SAFETY RULES MAY RESULT IN SEVERE PERSONAL INJURY OR DEATH.
7
WARNING:
SAFE AND SECURE STORAGE OF YOUR FIREARM IS ONE OF THE MOST IMPORTANT RULES OF FIREARM SAFETY. YOUR F AILURE T O FOLLOW THESE RULES MAY RESULT IN SERIOUS INJURY OR DEATH.
You must always secure your firearm and ammunition
separately so that they are not accessible to children or other unauthorized persons.
Safe and secure storage and transportation of your
firearm are your responsibility. It is a full-time responsibility.
•AL
WAYS STORE YOUR FIREARM UNLOADED.
Your firearm and ammunition should be stored separately in places and in a manner inaccessible to children and unauthorized persons.
•SMITH &
WESSON HAS PROVIDED A LOCK FOR
USE WITH YOUR FIREARM. There are also a variety of
other locks and safe storage containers available in the marketplace which may be appropriate for your particular needs. Consult your local gunshop, hardware store, or local police department for guidance on the variety of other safe storage devices or practices which may be appropr iate for your particular needs. By purchasing this firearm you have taken on the responsibility of safely securing the firearm at all times and preventing its unauthorized use. It is your personal responsibility to select and use whatever devices or practices that will enable you to safely secure your firearm at all times.
DO NOT USE A LOCK ON A LOADED HANDGUN
AND NEVER LOAD A LOCKED HANDGUN!!
Onl
y you can determine what devices or practices are
appropriate for the safe storage of your firearm and
your ammunition.
NEVER ASSUME THAT A “HIDING” PLACE IS A
SECURE STORAGE METHOD. Others may be aware of
your storage location or come upon it by chance. It is your personal responsibility to use common sense when storing and securing your firearm and ammunition and to always make sure that it is not accessible to children or other unauthorized persons.
FOLLO
W THE LAW!! You must be familiar with all local,
state, and federal laws regarding the safe storage and transportation of your firearm. Failure to know and follow the law may result in unauthorized access or use of your firearm by another. Obey all laws relating to the storage and transportation of firearms.
NEVER
TRANSPORT A LOADED FIREARM.
When transporting your firearm, be sure it is unloaded and that the cylinder or action is open.
SAFE STORAGE &
TRANSPORTATION
8
SAFE STORAGE & TRANSPORTATION CONT’D.
Your local police depar tment or gunshop will fur nish you
with available information on storing and/or transporting a firearm legally.
•Y
OUR FIREARM IS YOUR RESPONSIBILITY.
Protect your firearm from theft or misuse by untrained or unqualified individuals.
MAINTENANCE BEFORE ST
ORAGE
When storing, do not encase your firearm in anything that will attract or hold moisture, for example, leather or heavy cloth. Also, do not store guns with a plug inserted in the barrel for this can be a contributing factor to moisture accumulation. If your firear m is to be stored for an extended period, the bore, chambers and internal working mechanism should be oiled with acid-free lubricating oil or preservative, and the external working mechanisms, frame, cylinder and barrel should be coated with an anti-rust oil. Before using your firearm again, be sure to clean it. Every time you clean your firearm, check it for signs of wear. If wear is noted, do not use the firearm. Return it to Smith & Wesson for service or have it checked by a qualified gunsmith.
MAINTENANCE BEFORE USE
Before using your firearm, it should be cleaned. (See Cleaning Instructions at page 24.) Your firearm has been treated with either a preservative or oil to protect it against corrosion. Before using it, all excess oil should be wiped from the bore, chambers (charge holes), and exposed areas using a clean swab or patch. A light coat of high quality gun oil should be applied to the outside surfaces and mecha­nism. Care should be taken not to oil the mechanism to the degree that dust and lint may be trapped by the oil.
SAFE STORAGE & TRANSPORTATION CONT’D.
Smith & Wesson handguns are reliable and safe to use when the basic firearm safety rules are followed. There are a number of internal safety mechanisms within the lockwork of the handgun which ensure that the firearm will not discharge unless the trigger of the handgun is pulled. That is one reason why it is important to never modify or alter your firearm. Before you use your handgun, you should be fully familiar with its operation.
Here is a list of basic firearms terminology.
AMMUNITION - CENTERFIRE
- Ammunition which contains the primer in the center of the base of the case. Among the most common centerfire handgun cartridges are the .32, .38 Special, .380, 9mm, .357 Magnum®, .40 S&W®, .45 ACP and the .44 Magnum®.
AMMUNITION - RIMFIRE
- Ammunition which contains the primer material in the rim. Among the most common r imfire handgun cartridges are the .22 Long, .22 Shor t, .22 LR, .22CB, .22BB, and .22 Magnum.
CALIBER
- The diameter of a bullet, designated in hundredths or thousandths of an inch (.357) or in millimeters (9mm).
DECOCK
- The process by which the hammer or striker is
safely lowered.
NOMENCLATURE
9
NOMENCLATURE CONT’D.
DOUBLE ACTION -A firing action where the hammer or striker
is drawn back, released, and the gun fired by a single pull of the trigger.
DOUBLE ACTION ONLY
-A firearm designed so that it can only
be fired in double action.
PIST
OL -A handgun that contains the cartridges in a magazine.
REVOLVER -A handgun that contains the car tridges in a
cylinder that revolves at the rear of the barrel.
SINGLE A
CTION -A firing action where the hammer or striker is
released from the cocked position by pulling the trigger. The operation of your handgun will be explained in greater detail
in the pages that follow, as well as a greater description of key component parts.
PREPARATION FOR
FIRING
AL
WAYS WEAR EYE AND EAR PROTECTION WHICH IS
SPECIFIED FOR FIREARM USE.
Failure to wear adequate and proper ear protection on
even one occasion can potentially permanently damage your hearing. Make sure others who are nearby are wearing ear protection as well.
Always wear safety glasses, whether indoors or out.
Safety glasses protect your eyes from the firing flash and particles associated with the discharge of ammunition.
DO NO
T SHOOT A
T HARD SURFACES, WATER OR UP
INTO THE SKY. Always select a place to shoot that has a
safe backstop, is free from obstructions and water surfaces which cause ricochets.
Alw
ays be aware of other people so that persons cannot
accidentally walk into the line of fire.
Position the shooter and all others so that they are not
within an area where they may be struck by particle-spitting from a revolver or by ejected cases from other types of firearms.
Keep fingers and other parts of your body away from the
muzzle and away from the gap between the revolver barrel and cylinder, and away from the pistol slide and ejection port.
Be aler t and always follow the safety instruction of the
range officer.
10
PREPARATION FOR FIRING CONT’D.
Be sure that all cylinders and actions of firearms are
open, that chambers are clear of cartridges, magazines are removed, and that firearms are pointing in a safe direction before anyone is allowed in front of the firing position.
Be aler t at all times. Never shoot if you are tired,
cold or impaired in any way.
Treat your firearm as if it were loaded at all times.
AMMUNITION
PREPARATION FOR FIRING CONT’D.
A. GENERAL PRINCIPLES
A firearm and ammunition are a system and must work
together. Their performance is closely related. There are different types of ammunition for different types of firearms. Your firearm has been designed for ammunition of a specific type and a specific caliber. It is impor tant to select the proper ammunition for your firearm.
!! W
ARNING !!
Never use ammunition not specifically designated for
use in your firearm. Failure to use the correct type or caliber of ammunition may cause the firearm to jam, fail to fire or even generate excessive pressure which can damage or even rupture your firearm, causing personal injury or property damage.
You are responsible for selecting ammunition that meets
industry standards and is appropriate in type and caliber for this firearm.
Locate the caliber designation printed on the handgun.
This information indicates the ammunition caliber that should be used in this firearm. (See figure #1)
B.
HANDLOADED OR RELOADED AMMUNITION
!! WARNING !!
Never use non-standard, reloaded or “handloaded”
ammunition which has not been subjected to internal ballistic pressure testing. Reloaded or handloaded
ammunition, may have many manufacturing and quality variables (such as the type and amount of gun powder).
Any ammunition that is improperly manufactured,
even in the slightest degree, may fail to fire or may generate excessive internal pressures which can damage or even rupture the firearm, causing personal injury to the shooter or those in the immediate vicinity.
FIGURE 1
.45 ACP
PERFORMANCE
11
Use only commercially manufactured ammunition with
internal ballistic pressures which are in strict accordance with the specifications of the Sporting Arms and Ammunition Manufacturers’Institute (SAAMI).
Be certain all ammunition you use complies with the
SAAMI specifications. If you are uncer tain, contact your ammunition supplier for verification.
C.
MISFIRES
If your firearm fails to fire when the trigger is pulled
(misfires), keep the firearm pointed in a safe direction, remove your finger from the trigger, and wait 10 seconds. Only after you have completed all of the above steps, remove the magazine or open the cylinder and remove the cartridge from the chamber and dispose of it properly. Keep your firearm pointed in a safe direction at all times.
If you have heard an unusual sound or felt an unusual recoil
on firing, stop firing, wait 10 seconds, unload the firearm, and examine the barrel bore for obstructions.
Make sure your barrel is clear and free of obstructions.
If you see an obstruction, return your firearm to Smith & Wesson or take it to a qualified gunsmith. Never fire a firearm with an obstructed barrel.
D
. AMMUNITION SPECIFICS
Use only ammunition specifically recommended by
Smith & Wesson for your firearm.
Never mix ammunition.
Never use a cartridge not specifically designated for use in
your firearm. Pressure from the wrong type of ammunition may be beyond the capability of your firearm to withstand and may damage or even rupture your firearm.
Whenever rimless pistol cartridges are used in the cylinder
of a Smith & Wesson revolver, (except M547) full or half-moon clips MUST be used to both position and extract such cartridges. Failure to use ammunition clips with rimless cartridges may result in malfunction of the revolver.
Additional ammunition calibers can be fired from the
following list of select calibers.
Caliber on Barrel
Can also Fire .45 Colt .45 Schofield, .45 S&W .45 S&W .45 Schofield .44 Magnum .44 Special .357 Magnum .38 Special, .38 Special +P .22LR .22L, .22 Short, .22CB, .22BB
(in revolvers only) 10mm .40 S&W (in revolvers only)
In some cases, a round of ammunition not specified on your
handgun may fit into the chamber or cylinder. Firing ammunition not specified on your handgun may cause it to rupture and cause serious injury or death.
AMMUNITION CONT’D.
12
AMMUNITION CONT’D.
E. AMMUNITION WARNINGS
“Plus-P” (+P) ammunition generates pressures in excess of
the pressures associated with standard ammunition. Such pressures may affect the wear characteristics or exceed the margin of safety built into some revolvers and could therefore be DANGEROUS.
“Plus-P” ammunition should not be used in medium
(K frame) revolvers manufactured prior to 1958. Such pre-1958 medium (K-frame) revolvers can be identified by the absence of a model number stamped inside the yoke cut of the frame. (i.e., the area of the frame exposed when the cylinder is in the open position.
“Plus-P-Plus (+P+) marking on the ammunition merely
designates that it exceeds established industry standards, but the designation does not represent defined pressure limits and therefore such ammunition may vary significantly as to the pressures generated.
“Plus-P-Plus (+P+) ammunition is not recommended for use
in Smith & Wesson firearms.
In the Model 940 revolver, some brands of 9mm parabellum
ammunition may cause difficulty in extracting spent cartridge cases from the cylinder. If this situation occurs, thoroughly clean the cylinder charge holes with solvent. If this condition persists, we recommend changing to another brand of 9mm parabellum ammunition.
Smith & Wesson has found wide variations in primer
sensitivity between some brands and types of .22LR ammunition. Smith & Wesson recommends that before you put your .22LR handgun into regular use, that you fire several boxes of your choice of ammunition through it to determine reliability of ignition. If “failure to fire” occurs, tr y different types of brands of .22LR ammunition until a reliable loading is found.
13
MODEL NUMBER IDENTIFICATION
The serial number and the model number appear here on your pistol.
FIGURE 3c
Trigger Guard
Trigger
Grip
Magazine
Magazine
Release
Front Sight
Rear Sight
Hammer
Frame
Slide
Slide Stop
Notch
Safety Lever
Ejection
Port
Slide Stop
Extractor
Slide
Stop Pin
Barrel
Front Sight
Barrel
Bushing
Recoil Spring
Guide Rod
Grip
Safety
FIGURE 2a
FIGURE 2b
FIGURE 3b
FIGURE 3a
14
INSPECTING YOUR
PISTOL
When you inspect your pistol, you should first check for yourself to ensure that it is unloaded.To do this, grasp the pistol with your finger off the trigger and outside the tr
igger guard. Point the muzzle in a safe direction and depress the magazine release and remove the magazine (Figure 5). Depress the safety lever into the fully down “fire” position (Figure 6).
With the muzzle still pointing in a safe direction, grasp the serrated sides of the slide from the rear with the thumb and fingers as shown in Figure 7, and briskly draw the slide fully rearward in order to extract any cartridge from the barrel chamber and clear it from the pistol. Do not obstr uct the ejection port because doing so can interfere with ejection of a cartridge and thereby creates the risk of exploding an unchambered cartridge and causing possible injury. In order to lock the slide in the open position, allow the slide to move slightly forward from the rearmost position while pressing upward on the slide stop. You are now able to safely check the barrel chamber and bore visually for any obstructions.You must follow this procedure every time your firearm is inspected, cleaned, handed to another person, transported or stored. Unload the magazine by holding it with the bullet end of the cartridge pointing away from you and pressing each cartridge forward and out of the magazine. Pick up and secure any live rounds on the ground when you finish.
FIGURE 5
FIGURE 4
FIGURE 7
DO NOT BLOCK EJECTION PORT!!!
FIGURE 6
15
LOADED CHAMBER
INDICATOR
Currently manufactured 945 pistols come with a loaded chamber indicator. This indicator can be observed by looking at the top of the slide/ejection port, (Figure 8) noting an opening at the rear of the barrel hood. By looking into this opening, you can observe as to whether or not a round is in the firearm’s chamber. You would see the actual brass or silver colored rim through this opening if the chamber of the firearm was loaded.
FIGURE 8
INSPECTING YOUR PISTOL CONT’D.
Familiarize yourself with the safety lever on your pistol.When the safety lever is fully down as shown in figure 5, it is in the "fire" position; when the safety lever is fully up, as shown in Figure 4, it is in the "safe" position. It can only be placed in the “safe” position when the hammer is cocked (Figure 4). When it is in the “safe” position, the slide is also locked in place and cannot be moved rearward. Notice how the safety lever looks and feels in each of the two positions of its extreme travel - fully up for "safe" and fully down for "fire".
Please be advised that other model or brand pistols may have a safety or decocking lever that operates differently.
.45 ACP
PERFORMANCE
16
LOADING
• Do not load the pistol until you are about to fire.
Keep your finger outside the trigger guard until you are ready to fire.
WARNING: These Smith & Wesson centerfire pistols will fire with the magazine removed. Keep your fin­ger off the trigger and outside of the trigger guard until you have made the commitment to fire.
• Only use Smith & Wesson magazines specifically manufactured for your particular model of pistol. Do not interchange magazines from one model pistol into another model pistol.
• Smith & Wesson has provided you with a magazine designed to operate in your specific model of pistol.While your magazine may be able to be inserted into another model pistol, it will only function properly in the specific model for which it was designed.
•Follow instructions in this manual and any other specific instructions which may be marked onto, or accompany, a magazine. Failure to use the particular type of Smith & Wesson magazine specified for your model and caliber of pistol may result in a malfunction.
• Load the magazine by pressing a cartridge head (rear of cartridge) downward on the forward portion of the magazine follower (or downward on the case of the previously loaded cartridge) and sliding the car tridge fully under the lips of the magazine until the cartridge head is against the rear wall of the magazine. (Figure 9) Repeat the procedure for the number of cartridges you wish to load, up to the magazine capacity. Do not attempt to load your magazine with more than the specified number of cartridges because doing so can cause a feeding failure.
• Hold the pistol in one hand with the muzzle pointing in a safe direction and with your finger off the trigger and outside the trigger guard. Insert the loaded magazine into the magazine well of the pistol until it is locked in place.
WARNING: Do not use excessive upward force when inserting a loaded magazine into the pistol. Excessive upward force could cause the slide to move forward, chambering a round and making the pistol ready to fire.
FIGURE 9
LOADING CONT’D.
17
•To make sure that the magazine is fully and securely inserted, apply some removal pressure to the exposed portion of the magazine butt plate.
• With the muzzle still pointing in a safe direction, grasp the serrated sides of the slide from the rear with the thumb and fingers as shown in figure 10, and briskly draw the slide fully rearward and release it. This strips a car tr idge from the magazine and seats it in the chamber of the barrel and at the same time, fully cocks the hammer.
WARNING: The pistol will fire if the trigger is pulled!
• With the muzzle pointed in a safe direction and your finger outside the trigger guard, place the safety lever in the fully up “safe” position (Figure 11).
WARNING: Some early model 945 Performance Center pistols do not have a firing pin block and will fire if
subjected to sufficient impact by being dropped. For this reason, early Model 945 pistols with no dash number on the frame should not be carried with a round in the chamber. Models with a dash number such as the 945-1 or the 945-40 have the internal firing pin block.
DO NOT BLOCK EJECTION PORT!!!
FIGURE 10
FIGURE 11
DECOCKING
If you decide not to fire and your handgun is in the fully cocked position, you must follow these instructions to safely decock the handgun.
Remove your trigger finger from the trigger and out of the trigger guard. (Figure 12).
Place the safety lever in the fully up “safe” position.
Remove the magazine from the firearm.
Place the safety lever in the fully down “fire”position.
•Draw the slide back and eject any chambered round. Look into the ejection port to ensure chamber is empty. (Figure 13)
Place your trigger finger on the trigger and place the thumb of your opposite hand on the hammer. (Figure 14)
Pull the trigger to the rear and hold it while lowering the hammer to the forward position with your thumb. (Figure 15)
Release the trigger.
18
FIRING
• With the muzzle pointed in a safe direction and your finger outside the trigger guard, depress the safety lever fully down into the "fire" position. Check to make sure that the hammer is fully cocked. If it is not, cock it by drawing it fully back with the thumb of the shooting hand.
•To ensure proper firing control and to fully depress the grip safety, the pistol should now be gripped firmly with the shooting hand.
•Draw the trigger fully to the rear. This releases the hammer and causes it to strike the firing pin. Upon fir ing, the slide moves rearward thereby extracting and ejecting the spent cartridge case and returns the hammer to the fully-cocked position.
• The slide then returns forward feeding the next cartridge from the magazine to the barrel chamber.The hammer remains in cocked position so that subsequent shots will also be fired in the single action mode.This sequence can be repeated until the last round has been fired at which time the magazine follower exerts upward pressure on the slide stop causing it to engage the slide and hold it in the "open" position.
WARNING: Single action firing requires significantly less pressure on the trigger and reduced trigger travel than double action firing.
WARNING: Upon firing the pistol or releasing the slide from the slide stop, the slide moves rearward or forward with significant force and speed. To avoid injury be sure no part of your body is in the path of the slide’s travel.
19
UNLOADING
• Remove your trigger finger from the trigger and out of the trigger guard. (Figure 12).
• Place the safety lever in the up “safe”position.
•Point the muzzle in a safe direction. Depress the magazine release, and remove the magazine. Place the safety lever into the down “fire” position. With the muzzle still pointing in a safe direction, and with your finger off the trigger and outside the trigger guard, grasp the serrated sides of the slide from the rear with the thumb and fingers, and briskly draw the slide fully rearward in order to extract any cartridge from the barrel chamber and clear it from the pistol. Do not obstr uct the ejection port because doing so can interfere with ejection of a cartridge and thereby creates the risk of exploding an unchambered cartridge and possible injury.(See figure 13). Visually check the barrel chamber to be sure it is empty.
• Unload the magazine by holding it with the bullet end of the cartridge pointing away from you and pressing each cartridge forward and out of the magazine.
CLEARING MISFIRES
• If during firing, a cartridge fails to fire, the chamber must be manually cleared.Wait ten seconds while keeping the muzzle pointed in a safe direction. Grasp the serrated sides of the slide from the rear and briskly pull the slide fully rearward to eject the misfired round. Keep your finger off of the trigger and out of the trigger guard. Do not obstruct the ejection por t, and do not attempt to catch the round by placing your hand over the ejection port. (See figure 10) Also, remember that any time you release the slide while a magazine containing cartridges is in the pistol, you will have reloaded the chamber.
FIGURE 12 FIGURE 13
FIGURE 14
FIGURE 15
DECOCKING CONT’D.
SIGHT ADJUSTMENT
FIELD STRIPPING
DISASSEMBLY
• Remove the magazine by depressing the magazine release
button, clear the chamber and verify it is empty. Firmly grasp the frame and slide with the left hand as shown in Figure 16. Apply backwards pressure on the slide and move it back until the slide stop notch in the left side of the slide is aligned with the forward, rounded portion of the slide stop as shown in Figure 17. Press inward on the slide stop pin from the opposite side of the frame and remove the slide stop. (Figure 18)
• Certain model Smith & Wesson pistols are equipped with a FIxed Rear Sight that is adjustable for windage only. To adjust, move the Rear Sight in the direction you wish the group to move on the target.For example, if the group should move to the right, move the Rear Sight to the right. Use a brass or plastic drift or punch to prevent marring the Rear Sight. If the Rear Sight has a set screw, loosen the set screw prior to moving the Rear Sight.Tighten the set screw after the sight has been adjusted to the desired position.
• Certain model Smith & Wesson Pistols are equipped with a
screw type rear sight adjustable for elevation and windage.
ADJUSTING FOR ELEVATION
Rotate the Adjusting Screw installed on the top of the Rear Sight body clockwise to lower the Rear Sight or counterclockwise to raise the Rear Sight. (Raising Rear Sight will raise the group, etc.)
ADJUSTING FOR WINDAGE
Rotate the Adjusting Screw installed in the right side of Rear Sight body clockwise to move the Rear Sight Blade to the right or counterclockwise to move it to the left.(Moving Rear Sight to the right will move the group to the right, etc.)
20
Ensure your firearm is unloaded before adjusting your sights. At all times follow the basic rules of safe gun handling.
FIGURE 16
FIGURE 17
FIGURE 18
21
WARNING: The recoil spring is under pressure . Control the recoil spring and the guide so that they do not fly out and cause injury.
• Allow the slide to move forward until it is aligned with the frame in its normal closed position. Pull the slide forward off the frame while grasping the recoil spring assembly and slide together as shown in Figure 19. Remove the recoil spring assembly by depressing the spring slightly and releasing it carefully from the small radial undercut in the barrel lug. Remove the barrel from the slide. Figure 20 shows the par ts you will have after field stripping.
NOTE:
No further disassembly is recommended, as the pistol may be properly cleaned and lubricated when field-stripped as described above.
FIELD STRIPPING DISASSEMBLY CONT’D.
FIGURE 20
FIGURE 19
FIELD STRIPPING
REASSEMBLY
• With the rear of the slide pointed in a safe direction and the bottom of the slide turned up, replace the barrel in the slide (Figure 21) while fitting it into the spherical barrel bushing. This can be difficult as the fitting tolerances are particularly tight between the barrel and the bushing (Figure 22 & 23). A small amount of oil on the barrel can assist in this operation.
WARNING: Barrel to bushing alignment is critical. You must use finger pressure only to align and insert the barrel into the bushing. Patience and practice is required since the clearance is precise and minimal.
When the barrel is completely installed in the slide, its muzzle will be flush with the end of the slide.With the barrel lug turned up (away from the ejection port), insert the spring end of the recoil spring guide assembly in the guide housing (Figure
25). Grasp the recoil spring guide bushing and pull it toward you enough so the bushing can be securely engaged in the small radial machine cut in the barrel lug. Be careful that it does not become disengaged, fly out and cause injury.Make sure it is properly centered in the cut as it will protrude from the slide after assembly if it is not centered. Place a drop of oil on each of 4 locations on the slide rails. (Figure 24).
• Holding the slide and recoil spring guide firmly in one hand, move the rear of the slide onto the frame rails.Continue moving the slide onto the frame by depressing the ejector lever down into its respective frame slot (See Figure 26). Position the slide so that the slide stop notch on the slide is aligned with the slide stop hole in the frame. Inser t the slide stop and allow the slide to return to the "in battery" position. Decock the hammer. Reinser t the magazine.
22
FIGURE 24
FIGURE 22FIGURE 21
FIGURE 23
DISASSEMBLY (see Figure 27)
1. Remove all cartridges from the magazine.
2. Using a drift punch, depress floorplate catch (1) through hole in magazine floorplate (2).
3. Slide magazine floorplate (2) out of magazine tube (3) while holding floorplate catch (1) in the magazine tube (3).
4. Remove floorplate catch (1) and magazine spring (4) out through bottom of magazine tube (3).
MAGAZINE DISASSEMBLY
FIGURE 25
(3)
(4)
(1)
(2)
23
FIGURE 27
FIGURE 26
ASSEMBLY (see Figure 27)
1. Install magazine spring (4) and floorplate catch (1) in magazine tube (3) in exactly the same orientation as they were when they were first removed during disassembly (as explained above).
2. While holding floorplate catch (1) in magazine tube (3), slide magazine floorplate (2) into magazine tube (3) so that the round projection of the floorplate catch (1) engages the magazine floorplate (2).
MAGAZINE ASSEMBLY
FIELD STRIPPING REASSEMBLY CONT’D.
CLEANING AND
MAINTENANCE
!! W
ARNING !!
Ensure your firearm is unloaded before beginning to clean it. At all times follow the basic rules of safe gun handling.
Your firearm is a precision instr ument and to insure reliable function, it is necessary to follow a routine maintenance procedure. After firing your handgun, be sure to unload it following the procedure outlined in the section entitled “Unloading” on page 21 before perfor ming any cleaning or maintenance procedure.Your handgun should be cleaned by brushing the barrel bore and chamber (charge holes) with a good powder-removing solvent and bore brush.Wipe the areas clean with patches or a swab. Using a small br ush dipped in solvent, remove all deposits from around the breech of the barrel, chamber (charge holes), extractor and adjacent areas which have been subjected to the action of powder or primer residue. Remove any residue on the frame with light brushing and a solvent. After cleaning the entire gun, use a cloth to apply a light film of high quality gun oil to all external metal surfaces and wipe clean.
CAUTION:
You must follow the instructions provided with your gun cleaner and gun lubricant. Some cleaners can cause damage to your handguns.
CAUTION:
You should avoid prolonged solvent immersion and prolonged ultrasonic cleaning of your firearm. Choice of solvent should be restricted to those products specifically developed for firearms maintenance. Instances of damage to a firearm’s finish have been recorded when these cautions have been ignored. Ammoniated solvents or other strong alkaline solvents, should not be used on any Smith & Wesson firearm. As a rule of thumb, if you would be comfortable applying the solvent of your choice to the finish of your automobile, it will probably be safe for use on your firearm.
After the initial cleaning, there is usually some residue in both the barrel and cylinder that works out and becomes apparent within 24-48 hours. This can be removed with a bristle brush and a light re-application of powder removing solvent after which the oil film should be re-established on all surfaces.
Cleaning is considered essential in order to ensure the proper functioning of your handgun.
For additional maintenance, we recommend the services of a qualified gunsmith. Please refer to the section entitled “Service”. If your firearm will be used or stored in a cold climate, be sure to
use an oil that will not thicken at low temperatures.
24
25
SERVICE,
SHIPPING & PARTS
SERVICE
Should your Smith & Wesson firearm require service, it should be returned to Smith & Wesson in its original case or in a similarly secure container. It is not necessary to take the gun to a dealer for shipment. However, before shipping your firearm, call or e-mail our Customer Service Dept. for authorization and shipping instructions.
Before shipping your handgun, ensure that the firearm is unloaded, package it securely, and do NOT ship any ammunition. The package must NOT bear any markings which indicate the identity of the contents. Enclose a letter which includes your full name and address (no P.O.Boxes, please), daytime telephone number, e-mail address, the serial number of the firearm, and details of the problem experienced or work desired. Record the serial number before shipping, in case you wish to check on the repair status of your firearm.
Ship Centerfire pistols and ALL
revolvers to:
Customer Service, 2100 Roosevelt Avenue, Springfield, MA 01104
Ship ALL .22 caliber pistols to:
Customer Service, 19 Aviation Drive, Houlton, ME 04730
Please call the above telephone number or e-mail the above
address before shipping!!
Since we cannot assume responsibility for custom parts and accessories, such as stocks, special sights, or holsters, please remove these items before returning your firearm.
Warranty repair work will begin upon receipt and examination of the firearm. In the case of repairs or work not covered by the warranty, a quotation covering the cost of the work plus round trip transportation charges will be sent to you. Repairs or modification will begin upon receipt of payment.
Customer Service
2100 Roosevelt Avenue
Springfield, MA 01104
Tel: 800-331-0852 • 413-781-8300
E-mail: qa@smith-wesson.com
For Owners Within The United States
26
SHIPPING
When shipping a firearm, it is most important that you comply with federal, state, and local laws and regulations. The following guidelines are meant to help, but you must seek assistance from the appropriate authorities if necessary.
Check magazines and chambers to ensure that they
are unloaded. Do not ship ammunition.
Do not attempt to MAIL a handgun; only federally
licensed dealers may mail a firearm.
If your firearm must be replaced, it may be necessary
to ship the replacement to a dealer rather than directly to you. You will be requested to furnish a signed FFL (Federal Firearms License) from your dealer in such an instance.
When returning a pistol, please include all magazines
ensuring they are unloaded; they are impor tant to the proper function of the handgun.
A
CCESSORIES & PARTS
Replacement parts and accessories for your Smith & Wesson firearm are available from your local Smith & Wesson Stocking Dealer, or directly from the Smith & Wesson Parts Department.
When ordering parts directly from the factory, please provide the following information:
• Model Number
• Dash Number
• Serial Number
• Approximate date of purchase
•Part view Number (refer to diagram)
• Complete Return Address
• VISA/Discover/MasterCard Number and Expiration Date
•For Foreign Orders Only, Fax Number or E-mail Address
SERVICE, SHIPPING, & PARTS CONT’D.
27
WARRANTY
For Owners Within The United States
This warranty is granted by Smith & Wesson, 2100 Roosevelt Avenue, P.O.Box 2208, Springfield, MA 01102-2208. This warranty is effective from the date of purchase after February 1, 1989 and applies to the original owner of any handgun purchased after that date. With respect to such handguns, this warranty supersedes any and all other warranties.
Smith & Wesson handguns are warrantied to be free from defects in material and workmanship. Any such defects of which Smith & Wesson receives written notice within one year from the date of purchase by the original owner, will be remedied by Smith & Wesson without charge within a reasonable time after such notification and delivery of the handgun as provided below. If any unsafe and/or illegal condition if found during warranty inspection, Smith & Wesson will return the handgun to its original specification.
Warranty claims (in writing) and the handgun concerned should be delivered to Smith & Wesson’s Customer Service Department at the above address. In addition, a copy of the bill of sale in the owner’s name, or a copy of ATF Form 4473 indicating date of purchase must be included.
Warranty claims should state the model and serial number of the handgun concerned and the description of the difficulty experi­enced. It is recommended that shipments be insured by the owner, since Smith & Wesson will accept no responsibility for loss or damage in transit. Transportation and insurance charges for return to owner will be paid by Smith & Wesson if the claim is covered by the warranty.
UNDER NO CIRCUMSTANCES SHALL SMITH & WESSON BE RESPONSIBLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ECONOMIC LOSS, INJURY OR PROPERTY DAMAGE, WHETHER AS A RESULT OF BREACH OF EXPRESS OR IMPLIED WARRANTY, NEGLIGENCE OR OTHERWISE.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you in whole or in part.
Smith & Wesson will not be responsible for defects resulting from careless handling, unauthorized adjustments or modifications, defective or improper ammunition, corrosion, neglect, abuse, ordinary wear and tear, or unreasonable use.
Smith & Wesson reserves the right to determine what constitutes ordinary wear and tear. However, we can rebuild handguns that have experienced extreme usage or are beyond their normal use­ful life at a fee that will be quoted to the owner.
This warranty gives you specific legal rights. You may also have other rights that vary from state to state.
28
EXTENDED
SERVICE POLICY
For Owners Within The United States
Even after the warranty period has expired, Smith & Wesson will repair, without charge, any handgun purchased by the original owner on or after February 1, 1989 that is found to have defect in material or workmanship. Eligibility for this extended service policy requires returning the Product Registration Card within thir­ty days of purchase. A copy of the bill of sale in the owner’s name and the sales receipt should accompany the handgun.
If any unsafe and/or illegal condition is found during warranty inspection, Smith & Wesson will return the handgun to its original specification.
This policy covers functional defects;it does not include the hand-
gun’s finish, grips, magazines or sights.
This policy is in addition to and not an extension of the
Smith & Wesson Warranty.
Lif
etime Service Polic
y
Fast Reliable Service
If you have any questions or concerns regarding your Smith & Wesson product, please give us a call. Our customer service representatives are product knowledgeable and are here to help you.
911 Priority Repair Service
In the event of an emergency (repairs needed by law enforce­ment, an upcoming match or hunting trip), call 1-800-331-0852 and ask for 911 Priority Repair Service. This allows you to speak with a Smith & Wesson representative. Immediately upon receipt, your handgun will be assigned to a gunsmith. After the work is completed, we will return your Smith & Wesson handgun via overnight delivery.
29
NOTES
NOTES
30
This handgun is not equipped with a device that fully blocks use by unauthorized users. More than 200,000 firearms like this one are stolen from their owners every year in the United States. In addition, there are more than a thousand suicides each year by younger children and teenagers who get access to firearms. Hundreds more die from accidental dis­charge. It is likely that many more chil­dren sustain serious wounds or inflict such wounds accidentally on others. In order to limit the chance of such misuse, it is imperative that you keep this weapon locked in a secure place and take other steps necessary to limit the possibility of theft or accident. Failure to take reason­able preventative steps may result in inno­cent lives being lost, and in some circum­stances may result in your liability for these deaths.
31
The certification below is required only for handguns sold in the United States with a barrel length shorter than 3”.
Smith & Wesson Corp. hereby certifies average accuracy test results for all new handguns with a barrel shorter than 3” as follows:
7 yards 14 yards 21 yards
1.7” 3.9” 6.3”
This certification is based on tests conducted by Smith & Wesson Corp. using a fixed handgun, rest and firing ammunition manufactured by a member of the Shooting Arms and Ammunition Manufacturers Institute (SAAMI) as defined in ANSI/SAAMI Z299.3-1993.
This certification represents actual tests based on several handguns, selected at random. Your particular handgun may have accuracy better than the results stated in this certification.
Smith & Wesson
2100 Roosevelt Avenue • Spr ingfield, MA 01104
www.smith-wesson.com
REV:945_0703 01
Loading...