Page 1
N8012 QUICK START
Your Conductor N8012 is designed to control a video-over-IP distribution system made up of SVSi encoders and decoders. Connection to
the video network is through the gigabit Ethernet ports on the back of
the Conductor N8012 as shown.
All SVSi devices must be connected though Ethernet port 1 on the
right. Ethernet port 0 on the left is for seperate corporate LAN. Every
N8002 ships with a default static Ethernet port 0 IP address of
192.168.1.99 and a default static Ethernet port 1 IP address of
169.254.10.99.
3.5”
17.7
17.2”
To connect to your Conductor N8012 for the first time, plug a network
connection into Ethernet port 0 and browse to 192.168.1.99 using
Firefox, Chrome, or Internet Explorer. The network connection for the
host machine must have the 192.168.1.xxx domain. The log-in screen
should appear.
The default username and password is “admin” and “password”.
The username and password above is for the default administrator account. Once logged in, this can be changed and additional user
and administrator accounts added. If the only administrator account is the default admin account and the password is changed, make
sure to record this password since there is no way to recover except for factory restore.
For technical support, please visit http://support.svsiav.com or contact SVSi at 256.461.7143.
www.svsiav.com
Ethernet 0 = Corporate LAN Ethernet 1 = SVSi Network
Distribution | Switching | Recording | Windowing | Wall Processing | Control360B Quality Circle Suite 200, Huntsville, AL 35806
800DOCN8012QSREV1.3
Loading...