SVS Prime Wireless SoundBase Owner's Manual

Prime Wireless SoundBase ManualPrime Wireless SoundBase Manual

Congratulations on bringing home the SVS Prime Wireless SoundBase, a stunning achievement in sound quality
and audio connectivity. We want to make it as easy as possible for you to set up the Prime Wireless SoundBase, so
this manual will walk you through downloading the DTS Play-Fi app and everything you need to know to get the
most out of the Prime Wireless SoundBase experience. Our SVS Sound Experts are also available seven days a
week to take the guess work out of anything. They are equipped to handle even the most complicated questions
about connectivity, control, adjusting settings and optimizing sound quality.

One of the key features of the SVS Prime Wireless SoundBase is DTS Play-Fi. It enables WiFi connectivity with your
home network and provides app control that unlocks direct streaming from Spotify, Pandora, SiriusXm, Amazon
Music and many more popular music services. Play-Fi also allows multi-room audio playback, voice control via
Amazon Alexa, Critical Listening mode and much more. You’ll want to download the app before doing anything
else, so just visit the Apple® App Store, Google Play™ Store, Amazon Appstore or Microsoft Store and search “DTS
Play-Fi” to get started.

If you have any questions about your new SVS Prime Wireless SoundBase, please contact the SVS Sound Experts.

Email • [phone] • Chat

Happy Listening!

What's in the BoxWhat's in the Box

Unpacking and Preparing Your Prime Wireless SoundBaseUnpacking and Preparing Your Prime Wireless SoundBase

1. Place Prime Wireless SoundBase in desired location, attach power cord and plug into wall outlet.

2. Remove plastic film from front panel display by gently peeling off from the corner.

Front Panel ControlsFront Panel Controls

Prime Wireless SoundBase

AC Power Cord

Source & Preset Control

Rotate the left knob to change the input. Press the knob to select a preset (after they are programmed).

Front Panel Display

LED backlighting indicates the selected audio source (Wi-Fi, Bluetooth, Optical or Auxiliary) and preset (1-6).

Play, Pause & Volume

Rotate the right knob to adjust volume. Press the knob to pause/un-pause.

Headphone Output

Connect headphones for private listening.

Rear Panel Connections & ControlsRear Panel Connections & Controls

1. L/R Speaker Binding Posts
Connect speakers via speaker cables or wires. Accepts banana plugs, spades and bare wire terminations.

2. L/R AUX In
Connect any stereo source that has a left and right stereo analog output.

3. 3.5mm AUX In
Connect to headphone outputs of smartphones, tablets or other audio devices.

4. Service USB
For firmware updates and charging USB devices like a smartphone, tablet or SoundPath Wireless Audio Adapter
to make your subwoofer fully wireless.

5. In/Out Network
Connect standard Ethernet cable for hard-wired Internet connection.

6. Sub Out
Add a subwoofer using standard audio interconnect cable (not included) or the optional SVS SoundPath
Wireless Audio Kit.

7. L/R AUX Out
Connect Prime Wireless SoundBase as a source for an existing device like an AV receiver or Preamp.

8. Optical In
Connect sources with optical digital outputs such as a TV or game console.

9. Wi-Fi Setup
Enables Wi-Fi set-up mode and shows status of wireless connection. Blinking yellow light indicates set-up mode,
solid light means it’s set-up and ready to use.

10. Bluetooth Setup
Enables Bluetooth pairing mode and shows status of Bluetooth connection. Blinking blue light indicates pairing
mode, solid light means it’s connected and ready to use.

11. AC Power Cord Input

WiFi Network RequirementsWiFi Network Requirements

To get the most out of your new SVS Prime Wireless SoundBase’s dual-band WiFi, you’ll need a router with 2.4GHz
and/or 5GHz WiFi connectivity and a connected mobile device. Play-Fi is compatible with all routers that are Wi-Fi
certified and meet Wi-Fi standards.

Note: Satellite internet services are prone to playback issues due to fluctuating download rates.

Note: Have your network password ready before connecting the SVS Prime Wireless SoundBase to your network.

Connection OptionsConnection Options

Your Prime Wireless SoundBase streams music directly from your home WiFi network using the DTS Play-Fi app.
You can also stream at the highest resolution possible from any Bluetooth enabled smartphone, tablet or
computer.

Prime Wireless SoundBase can be connected directly to speakers via standard speaker wire or cables with the 5­way binding posts. It also has a line level output that transform AV receivers or tw0-channel audio systems in
smart wireless audio zones. For direct connections to computers, TVs, Blu-ray players, gaming consoles and more;
Prime Wireless SoundBase has a 3.5mm and L/R line level inputs and an optical input. A headphone output on the
front panel enables private listening and a subwoofer output is also available for deeper and more powerful bass.

Instructions for setting up and using all of these connections can be found in this manual. If you have any
questions during set-up, please contact our SVS Sound Experts for prompt and professional service: Email • (877)
626-5623 • Chat

Connecting Speakers via Binding PostsConnecting Speakers via Binding Posts

1. Connect Left and Right speaker cables or wire to +/- terminals on your loudspeakers.

2. Connect speakers to matching Prime Wireless SoundBase Left and Right terminals via bare wire, banana plugs
or spades, making sure +/- polarities match speaker connections.

Connecting as a Source via Line Level OutputConnecting as a Source via Line Level Output

1. Connect RCA interconnect to appropriate L/R input on AV receiver or Preamp.

2. Connect opposite end of cable to SVS Prime Wireless Soundbase L/R Aux Output.

Setting Up WiFi And The DTS Play-Fi AppSetting Up WiFi And The DTS Play-Fi App

The DTS Play-Fi app offers a rich feature set that unlocks the full potential of your Prime Wireless SoundBase with
smart, wireless control capabilities not available from any other wireless audio products. Downloading the app is
an important first step towards getting the most out of your new system.

1. Download the Play-Fi App
Search “Play-Fi” in the Apple App Store, Google Play Store, Amazon Appstore or Microsoft Store and download
the free DTS Play-Fi app to start unlocking the full potential of your new Prime Wireless SoundBase.

2. WiFi Set-up Mode
Once powered on for the first time, the Prime Wireless SoundBase will automatically go into WiFi setup mode,
indicated by a rapidly blinking yellow light on the rear panel. When the blinking light slows down to a slow
pulse, it is ready to connect. WiFi connection will be confirmed when yellow light remains on permanently.

3. Connect to WiFi Network
iOS users must go to the “Settings” -> “WiFi” on their mobile device and select the “PlayFiDevice…” like you
would a normal Wi-Fi network then open the Play-FI app to continue.

Android users just need to open and run the Play-Fi app.

4. Configure Play-Fi App
Open the Play-Fi app and follow the prompts to finish setting up your Prime Wireless SoundBase on your home
WiFi network

(image 9a and 9b)

.

From here, the app will find your Prime Wireless SoundBase and connect it to the WiFi network for you. You will
type in your network password once

(image 9c)

, and the app will do the rest. It’s important not to close or exit

out of the app until the process is full complete or it may disrupt the configuration.

During installation, the Play-Fi app will look for and install any updates. These updates add 3-5 minutes to the
installation time.

Once network set up and updates are completed, you can select a name for your new Prime Wireless
SoundBase

(image 9d)

, control volume

(image 9e)

and start enjoying music from your favorite streaming

services

(image 9f)

.

Image 9a. Image 9b. Image 9c.

Having Trouble Connecting?

The Prime Wireless SoundBase may require an update before letting you stream music. The Play-Fi app will show
a notification and complete the update automatically. This is completely normal and can take 3-5 minutes.

If it’s not being discovered by the WiFi network, try moving it closer to your router or to a stronger signal area to
establish a connection. Also, make sure the Prime Wireless SoundBase and app are both configured to the same
WiFi network in your home.

Not going into setup mode?

Standard Set-Up Mode: To put the device into Standard Set-Up Mode, hold the WiFi button down for 8 seconds.

You will hear a tone at 4 seconds, but do not release the button until after you hear the same tone again after the
full 8 seconds. The product will now be in Standard Set-Up Mode, and the WiFi light will slowly pulse on and off.

WPS Mode: To put the device into WPS Mode, hold the WiFi button down for 4 seconds. At 4 seconds you will hear
a tone and the WiFi light will begin to blink a pattern of two times on and then a pause and then repeat. It is now

Image 9d. Image 9e. Image 9f.

ready for WPS pairing.

If you have any questions during WiFi set-up, please contact our SVS Sound Experts: Email • [phone] • Chat

Audio Streaming GuideAudio Streaming Guide

Connect. Select. Play.

Once your Prime Wireless SoundBase is set up, you can access music from your smartphone, tablet and computer
and stream your favorite music services directly via your home’s WiFi network using the DTS Play-Fi app. You can
also enjoy ultra high-resolution Critical Listening Mode, create a multi-room audio system and enjoy all the
benefits of the DTS Play-Fi app.

Setting Up Custom PresetsSetting Up Custom Presets

A unique feature of the Prime Wireless SoundBase, the six custom presets give you instant access via WiFi to your
favorite playlists, Internet Radio stations and streaming music services that exist within the DTS Play-Fi app,
without needing a phone or tablet. Simply walk up to your Prime Wireless SoundBase, push the knob and your
favorite music will start playing.

1. From the Play-Fi app, start the streaming service you want to program as a preset.

2. Firmly press the left control knob to select which preset you want to program (1-6). Each time you press the
knob, it will move to the next preset.

3. When desired preset number is selected, press and hold the preset knob for about three seconds. The preset
number will blink several times then remain highlighted to indicate the preset has been programmed, and
music will resume playing.

4. Follow instructions above for the remaining five presets.

NOTE: It takes a few seconds for the preset to connect to music services from your WiFi network. The preset
number will flash while it establishes a connection and remain highlighted once connected. This delay is
completely normal.

5. You can now access your favorite content by firmly pressing the left knob to toggle through your presets at any
time.

6. To re-program a preset, simply repeat steps 1 – 3.

NOTE: When setting up Pandora or Spotify as Presets, the app may ask you to sign into your account first.

Enabling Critical Listening ModeEnabling Critical Listening Mode

Critical Listening mode will enable native rendering of high-resolution files up to 24-bit/192KHz, with no down­sampling or network synchronization adjustment.

1. When you start the Play-Fi app, before selecting your Prime Wireless SoundBase, tap the Hi-Res button in the
top bar of the zone module

(image 12a)

.

2. The Hi-Res logo will turn gold, the app will display CRITICAL LISTENING MODE, and the list will only display the
products that are compatible with this mode

(image 12b)

.

3. Select the Prime Wireless SoundBase you want to stream to (only one can be selected), and then play from your
desired source for the truest audio reproduction possible over WiFi.

Image 12a. Image 12b.