User's Manual
Model No. CVQ1000
WIRED COLOR CAMERA WITH QUAD
PROCESSOR & REMOTE CONTROL
PLEASE READ CAREFULLY AND SAVE
This manual contains important information about this product's operation. If you
are installing this product for use by others you must leave this manual -or a
copy-with the end user.
Important!
Please read this booklet carefully before installing or using these units.
WARNING-These units should ONLY be opened by an authorized technician if
service is required.
Safety Precautions
For correct and safe operation of this system, it is essential that installers,
end-users and service technicians should follow all safety procedures outlined in
this manual. Specific Warning and Caution statements (and/or symbols) are
marked on the units where needed.
Warning and Caution Statements
"WARNING" indicates a situation where failure to follow proper procedures can
cause personal injury. "CAUTION" indicates a situation where failure to follow
proper procedures can cause damage to the equipment.
Parts Included with This System
1. 4 Channel Switcher Box x 1 set
2. Remote Control x 1 pc
3. Color Camera With Mounting bracket x 4 pcs
4. 60ft Cable x 4 pcs
5. Video Cable x 1 pc
6. 12V DC Adaptor for the Switcher x 1 pc
Parts of the System
Parts of the Camera
A. Mounting bracket
B. IR LED
C. Camera Din Connector
D. Camera Lens
Installation and Adjustment
A. Camera Installation
1. Install or mount the camera at the desired
location. Do not place camera in a location
subject to direct sunlight or bright light.
2. The coaxial cable supplied has one end
with a DIN connector (Male) and the
opposite end with a DIN connector (Female).
Slowly insert the DIN plug into the back of
the camera being careful to align the DIN
plug correctly.
3. The camera body could be adjusted up and down by
loosening screw A and tightening up at desired angle B.
4. The camera body could be rotated
around the mounting bracket D. by adjusting screw C for any direction (360 degree).