Suzhou Seekcy Electronic Technology 000001 User Manual

Suzhou Seekcy Electronic Technology Co., Ltd.
SEEKCY
M0 series iBeacon
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference. (2) this device must accept any interference received, including interference that may cause undesired operation.
1 / 9
1. Equipment overview
M0U is a iBeacon product based on BLE 4.0.iBeacon is a Bluetooth radio technology
in accordance with the set frequency and power periodicity to send the Bluetooth
radio content meets iBeacon protocol.After phone or other smart devices received
near the iBeacon broadcast, to achieve the information push, accurate positioning and
other functions.
M0U using the DIALOG company's main chip DA14580, fully supports BLE 4.0. Use
CR2477 battery powered, battery can be replaced at any time.
M0U can be used at any time with the configuration APP, configuration ID, transmit
power, emission interval and other important parameters. M0U has a perfect
anti-tamper mechanisms to protect against unauthorized changes. Part of the APP
interface diagram as shown in the figure below.
Figure 1: Schematic diagram of configuration tool APP
Users can obtain the following ways to configure APP:
2 / 9
1.Scan the below two-dimensional code download configuration tool;
2.Apple users can search for "seekcy" in the app store.
iOS Android
2.Use of configuration tool APP
3 / 9
4 / 9
5 / 9
M0UUltra-low-power version
Chip
Dialog DA14580
Support
Bluetooth BLE 4.0, Apple's standard iBeacon protocol
3.The basic parameters of the device
6 / 9
Agreement
Battery
Program
CR2477 1050mAh
Transmit Power
0dBm ~ -20dBm
Coverage
The maximum can reach 80m
Battery Life
2 years
Waterproof
Level
IP50
Dimensions
Diameter 46mmthickness 16mm
Weight
21.5g
Applicable
System
iOS7.0 and above, Android 4.3 and above.
Safety
Password protection, tamper resistant, anti rub use (optional).
Configure
Phone APP
Support to modify the UUID, Major, Minor, broadcast interval, broadcasting
power, set the tamper resistant keys, etc.
Other
Properties
Support button/LED, provide secondary development SDK
Certification
CE
Feature
Stylish compact design , signal stability, high endurance, save maintenance
costs and high cost! Supporting powerful and easy to use configuration tool
APP.
7 / 9
Packaging Information
Industry inner box
Carton Industry
Quantity
30
510
Net Weight
0.645kg
10.965kg
Size
40*24*1.4cm
42*25*40cm
4.Packaging Information
8 / 9
Loading...