Surveon SMR5016, SMR5020 Hardware Manual
SMR5016/5020
Smart Megapixel Video Recorder
Hardware Manual
Release 1.0
August, 2011
2
All Rights Reserved © Surveon Technology 2011
Copyright Statement
No part of this publication may be reproduced, transmitted, transcribed,
stored in a retrieval system, or translated into any language or computer
language, in any form or by any means, electronic, mechanical, magnetic,
optical, chemical, manual or otherwise, without the prior written consent of
Surveon Technology Inc.
Disclaimer
Surveon Technology makes no representations or warranties with respect to
the contents hereof and specifically disclaim any implied warranties of
merchantability or fitness for any particular purpose. Furthermore, Surveon
Technology reserves the right to revise this publication and to make changes
from time to time in the content hereof without obligation to notify any
person of such revisions or changes. Product specifications are also subject to
change without notice.
Trademarks
Surveon and Surveon logo are trademarks of Surveon Technology Inc. Other
names prefixed with “SMR” are trademarks of Surveon Technology Inc.
Microsoft Windows and Windows are registered trademarks of Microsoft
Corporation.
Linux is a trademark of Linux Torvals.
Solaris and Java are trademarks of Sun Microsystems, Inc.
All other names, brands, products or services are trademarks or registered
trademarks of their respective owners.
3
Table of Contents
Copyright Statement .........................................................................2
Safety Precautions............................................................................5
Device Site Recommendations..............................................................5
Regulatory Compliance Information .......................................................6
Revision History ...............................................................................8
Chapter 1. Product Overview...............................................................9
1.1. Features and Benefits...............................................................9
1.2. Specifications for the SMR Series .................................................9
Hardware Specifications ................................................................ 9
VMS Specifications .......................................................................9
Chapter 2. Hardware Overview .......................................................... 12
2.1. Overview............................................................................. 12
Front View .............................................................................. 12
Rear View ............................................................................... 12
2.2. Panel Introduction ................................................................. 13
Front Panel (Top) ...................................................................... 13
LCD Module.............................................................................. 13
Front Panel LED ........................................................................ 13
Front Panel (Bottom) .................................................................. 15
Rear panel components ............................................................... 15
Chapter 3. Installation Guide ............................................................. 16
3.1. Before You Start.................................................................... 16
Checklist for Operating Environment................................................ 16
Check Network Topology.............................................................. 16
3.2. Hard Drive Installation ............................................................ 17
Hard Drive Installation Prerequisites................................................ 17
Placing Hard Drive into Drive Tray .................................................. 17
Inserting Hard Drive into Drive Tray................................................. 17
3.3. Cabling ............................................................................... 19
4
3.4. Powering up SMR ................................................................... 20
3.5. Resolution Setting.................................................................. 21
3.6. Storage Management .............................................................. 23
3.7. Configuring an IP Address for NVR Server ..................................... 26
3.8. Adding Network Cameras to the Server........................................ 27
Auto Scanning for Camera ............................................................ 27
Manually Adding Cameras............................................................. 28
3.9. Initializing the Camera............................................................ 29
3.10. Setting up Live View ............................................................. 30
5
Safety Precautions
Electric Shock Warning
This equipment may cause electric shocks if not handled properly.
Access to this equipment should only be granted to trained operators
and maintenance personnel who have been instructed of, and fully
understand the possible hazardous conditions and the consequences of
accessing non-field-serviceable units such as the power supplies.
The system must be unplugged before moving, or in the even that it
becomes damaged.
Reliable Grounding
Particular attention should be given to prepare reliable grounding for the
power supply connection. It is suggested to use a direct connection to the
branch circuit. Check for proper grounding before powering on the device.
Overloading Protection
The device should be installed according to specifications. Provide a suitable
power source with electrical overload protection. Do not overload the AC
supply branch circuit that provides power to the device.
ESD Precautions
Please observe all conventional anti-ESD methods while handling the device.
The use of a grounded wrist strap and an anti-static work pad are
recommended. Avoid dust and debris in your work area.
Device Site Recommendations
The device should be installed according to specifications. This device should
be operated at a site that is:
Clean, dry, and free of excessive airborne particles.
Well-ventilated and away from heat sources such as direct sunlight
and radiators.
Clear of vibration or physical shock.
Away from strong electromagnetic fields produced by other devices.
Available with properly grounded wall outlet for power. In regions
where power sources are unstable, apply surge suppression.
Available with sufficient space behind the device for cabling.
6
Regulatory Compliance Information
Regulatory Compliance Information
FCC/CE Class A
IEC 60950
Shown below is the location of the compliance statement label.
FCC
(applies in the U.S. and Canada)
FCC Class A Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules (47 CFR, Part 2,
Part 15 and CISPR PUB. 22 Class A). These limits are designed to provide
reasonable protection against harmful interference when the equipment is
operated in a residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in
accordance with this user’s guide, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, you are encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of FCC Rules. Operation is subject to
the following two conditions: 1) this device may not cause harmful
interference, and 2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning!
A shielded power cord is required in order to meet FCC emission limits and
also to prevent interference with nearby radio and television reception. Use
only shielded cables to connect I/O devices to this equipment. You are
cautioned that changes or modifications not expressly approved by the party
responsible for compliance could void your authority to operate the
equipment.
7
This device is in conformity with the EMC.
Notice for Class A Product
This notice is for class A product only. If the equipment under test is a class B
product, this notice should be disregarded.
Class A ITE is a category of all other ITE which satisfies the class A ITE limits
but not the class B ITE limits. Such equipment should not be restricted in its
sale but the following warning shall be included in the instruction for use.
Warning:
This is class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures.
Surveon is committed to being properly prepared and taking all the necessary
steps that will result in our compliance with the new European directive,
RoHS (2002/95/EC), on or before the specific dates set forth in those
applicable laws and regulations. Surveon is applying its own internal efforts
and expertise and is working closely with customers and suppliers to achieve
compliance while maintaining an uninterrupted supply of quality products.
Surveon is currently investigating, evaluating, and qualifying our materials
and components to ensure that products sold on or after 1 July 2006, in such
territory, are in compliance with the above regulations.
Disposal of Old Electrical & Electronic Equipment (Applicable in the European
Union and other European countries with separate collection systems) This
symbol on the product or on its packaging indicates that this product shall
not be treated as household waste. Instead it shall be handed over to the
applicable collection point for the recycling of electrical and electronic
equipment. By proper waste handling of this product you ensure that it has
no negative consequences for the environment and human health, which
could otherwise be caused if this product is thrown into the garbage bin. The
recycling of materials will help to conserve natural resources.
8
Revision History
Ver
sion Description Date
1.0 Initial release August 2011
9
Surveon Smart Megapixel Video Recorder Hardware Manual
Chapter 1.
Product Overview
1.1. Features and Benefits
The Surveon SMR series is a state-of-the-art network video recorder features
hardware RAID, low power and hot swappable hard disks. With 2/5/8-bay hard disk
trays, the SMR series is the best in class NVR that supports megapixel quality video
of 6 to 32 channels for video retention periods from 7 to 30 days or more. In
addition, the SMR series is fully burn-in-tested and uses preloaded Surveon
Enterprise VMS to eliminate compatibility issues while reducing maintenance
overheads. It is out of question that the SMR series is the most reliable and costeffective solution for small to medium sized surveillance needs.
1.2. Specifications for the SMR Series
Hardware Specifications
SMR5016/5020
System Processor Intel ® ATOM525 Dual Core @ 1.8 GHz
System Memory DDR3 2GB
Chipset Intel ® ICH9R
Disk on Module 4GB
Storage 3.5” SATA HDDs x5 ; HDD hot swappable
I/O Interface
VGA: 1xD-Sub
RJ-45: 2x1 Gigabit Ethernet
USB: 4x USB2.0
E-SATA: x1
H/W RAID RAID 0, 1, 5
Electrical
Input Voltage: 100V~240V, 1.5A
Frequency: 50Hz~60Hz
Power Consumption (in operation): 43W
Operating
Environment
In operating
Humidity: 5% to 80% (non-condensing)
Temperature: 5°C to 40°C
LCD Panel Yes
LED Indicator Yes
Dimensions 190(H) x 110(W) x 245(D) mm
Weight 5 kg (without hard drives)
Certificate BSMI, CB, FCC / CE Class A , UL60959/ IEC60950,
GOST
VMS Specifications
Live View • Real-time network camera discovery
• Versatile views of various screen divisions
• HTML and image overlays
• Multiple views supported
• View patrolling for single or multiple views
• Real time vidoe/event alarm display
Loading...