Surplus Shed 1575, T1409, T1471, T1475, T1484 Catalog

SUMMER 2006

SURPLUS OPTICS & ELECTRONICS CATALOG

BARGAINS FOR FUN, HOBBY, EDUCATION OR PROFIT

• LENSES, MIRRORS, PRISMS, FILTERS

• EYEPIECES AND EYEPIECE LENS SETS

• SCIENTIFIC INSTRUMENTS

• OPTICAL DEVICES

• MILITARY SURPLUS

• EDUCATIONAL OPTICS

• RADIO/ELECTRONICS

• MISCELLANEOUS FUN STUFF

Surplus Shed •www.SurplusShed.com

MORE ITEMS ON OUR WEBSITE

Table of Contents

To Order, call toll free: 1-877-7SURPLUS

Table of Contents

Achromats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Antiques . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Beamsplitters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Binocular Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Binoculars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Books . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Bulbs/Lamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Camera Lenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Cameras . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Compass Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Educational Optics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Electrical Components . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Eyepieces/Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

Fiber Optics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

Flats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

Glass Blanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

Instruments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57

Integrated Circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61

Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61

Lenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62

Magnifiers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74

Microscopes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78

Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82

Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84

Motors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102

Objective Lenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106

Optical Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108

Photographic Film/Paper . . . . . . . . . . . . . . . . . . . . . . . . .109

Power Supplies/Adapters . . . . . . . . . . . . . . . . . . . . . . . .110

Precision Optics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112

Prisms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121

Radio/Electronics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .129

Reticles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .134

Telephones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135

Telescopes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .136

Tools

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

138

Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .139

VIP MEMBERSHIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .139

JJUUSSTTAARRRRIIVVEEDD!!

ZEISS 6X30 BINOCULAR PARTS KIT

This kit includes all the non-optical parts you need to
fix your Zeiss binoculars or make like new, with the
exception of the body. These original Zeiss parts are
all unused in the original packaging. 26 pieces included
all in your very own brown paper bag! Includes eyecups
that are very hard to come by! Our understanding is

that not only will this set fit the Zeiss 6x30 binoculars,
but they used the same parts for the individual focus 8x30. A rare military
collectible or resell your reconditioned binoculars to make $$$!!

B1008 $49.00

JJUUSSTTAARRRRIIVVEEDD!!

LEICA 1200XL SCIFINDER MICROSCOPE KIT

This SciFinder microscope is made by Leica's

Cambridge Instruments. It's constructed with all glass

optics and a dicast aluminum body, similar to the quality

standards used in Leica;s professional research micro-

scopes. The stand, viewing tube and mechanical parts

are all metal and corrosion resistant and is designed to

provide years of rugged use from your child's first
school science fair project and beyond.This is the instrument to encourage
your young scientist to uncover the exciting microscopic world. The preci­sion crafted SciFinder encourages observation and appreciation of science
from the most elementary to the most sophisticated levels of understand­ing. The kit provides the investigative tools needed to begin the step-by­step process of scientific discovery.SciFinder optics are all anti-reflection
coated for high contrast and clear crisp images. 4 high power objectives
rotate on a turret and are color coded for easy identification. With the
included 10x wide field eyepiece, you will be able to magnify specimens from
50 to 1200 times. The longer objectives are spring-loaded and retractable
to protect slides from breakage. The microscope also maintains parfocality
from one magnification to another so the specimen stays in constant focus
(just another of the professional features that makes this such a great
buy)Here are some of the additional features and items included in the kit:
Dual concave/plano glass mirror to concentrate and direct illumination to
the specimen; battery operated illuminator for those times when an exter­nal light source isn't available; four aperture, click-stop diaphragm to con­trol the amount of light entering the field of view; fingertip controlled rack
and pinion focusing for fast , smooth adjustments; Explorer's Guide full of
suggestions for the use and care of the instrument; basic microscope tech­niques like making slides; forceps; prepared slides; test tubes and other
useful tools. Unused. Makes a great educational gift.

T1517 $75.00

JUST ARRIVED - Page 1

Surplus Shed – www.SurplusShed.com

JJUUSSTTAARRRRIIVVEEDD!!

ELECTRONIC CAMERA SHUTTER ASSEMBLY

This is an automatic shutter unit made for a camera

and is a beauty. Complete with 2 solenoids, cadmium

sulfide photo electric light sensor that determines the

exposure and tells the solenoids when to open and close

and hence the shutter speed. Has a Mitsubishi

M51081P integrated circuit which we believe to be a

self timing chip and film speed sensor. We don't know
what camera it was made for and don't have voltage requirements or other
specs. Assembly is 2-3/4" long by 2" wide. Shutter opening is 1/2". They
are marked "7X1E". Unused in original static shielding bag.

M2410 $5.00

JJUUSSTTAARRRRIIVVEEDD!!

BAG OF (24) ASSORTED PLASTIC GEARS

Ranging is size from 3/16" to 1-5/16". Includes 18

gears with center hole of 1/16", and 6 worm gears with

1/16" hole. Perfect for science projects and experi-

ments! Get these while they last! Unused.

M2620 $4.50

JJUUSSTTAARRRRIIVVEEDD!!

MILITARY AIRCRAFT PERISCOPE SEXTANT

These were used in military aircraft to determine night

flight position relative to the stars. Has right angle

eyepiece assembly with eyeguard. Periscope view has

bubble level which can be increased in size with the

control, and crosshair reticle. Includes adjustable lens

diffuser and 9 position filter control. Filters are red,

green, clear, Neutral Density and some ND mixed with
other filters. Includes a timer and 3 digit counter dial. For timer and lights
to work, need 28 volts AC or DC. Complete with military transit case.
These are a newer model than the ones we sold out of a few years ago.
Very good condition. Case is 16.5" x 10.5" x 7" high. Case alone is worth our
price for this interesting military optical instrument. Original cost was
$1909.14. Sorry, but we are not allowed to sell these outside the US.

T1516 $65.00

Achromats

36MM X 350MM ACHROMAT

Cemented doublet, 36mm diameter by 350mm focal length. Unused.

L1325 $6.50

Page 2 - Achromats

To Order, call toll free: 1-877-7SURPLUS

COATED ACHROMAT, 31.5MM DIA.

Focal length is 51mm. Coated cemented doublet. Made to be part of a mili­tary eyepiece assembly. These are lens elements #7 & 8. Unused.

L1492 $7.00 or 10 for $56.00

RECTANGULAR ACHROMAT, CTD

37.3mm diameter by 28.7mm wide by 11.5mm thick. Has curved edges.
105mm focal length. Coated

L1601 $5.50 or 10 for $45.00

15MM DIA MTD ACHROMAT

Achromat, in threaded barrel mount (has both inside

and outside threads). Lens is 15mm clear diameter by

50mm focal length. Mounting is 18.8mm diameter by

12mm long. Not coated. Unused.

L1657 $5.50 or 10 for $40.00

COATED RECTANGULAR ACHROMAT

This makes a super magnifier. 31.7mm x 23.7mm x

10.2mm thick. Coated achromat with curved edges.

100mm focal length. Unused.

L1725 $5.00 or 10 for $40.00

HASTINGS TRIPLET - UNMOUNTED

These are typically used as high power magnifiers.

Cemented three element design provides the ultimate

in distortion and spherical aberration free, color cor-

rect viewing. 15mm diameter, 10x magnification.

Surface quality 60/40. Unused

L1865D $18.50

Achromats - Page 3

Surplus Shed – www.SurplusShed.com

MOUNTED ACHROMAT, 9MM DIA BY 40MM FL

Coated achromat in mounting. Clear lens diameter is

9mm and focal length is 40mm. Mounting is 13.5mm

diameter by 8.9mm long, then machined to 9.5mm diam-

eter by 5mm long with a center opening of 4.2mm.

Clearly intended for a specific application. If you have

a project that can use this achromat in its mounting,

what a find! The lens is held in by a retaining ring so it
can be removed. Use it as is or use either the mounting or lens by itself.
We have a good quantity of these and our price is super.

L2010 $4.75 or 10 for $35.00

15MM DIA X 40MM FL MTD ACHROMATIC LENS ASSY

Multi coated, multi element achromatic lens assembly

mounted with threaded focusing mount. Clear front

element lens diameter is 15mm, and clear back element

diameter is 11mm diameter. Assembly is 20mm diame-

ter by 13mm high. Focal length is 40mm. Unused.

L2057 $8.00 or 10 for $65.00

LASER COLLIMATOR LENS, ACH, 12MM FL

Achromatic laser collimator lens. Clear lens diameter is

5mm. Assembly is 9mm diameter by 4mm long. Coated

optics. We have a good quantity of these if you want

to incorporate it into your product. Our price is

unbeatable! Unused.

L3383 $8.00 or 10 for $60.00

AUGUSTA ARSENAL 18MM DIA 39MM FL ACHROMAT EYELENS

These are Jaegers catalog # 11A 856 and are labeled

Augusta Arsenal and W.H. Huff. These are unused all in

the original box and packaging from 1954. These were

made to be used in some of the military 7 x 50 binocu-

lar eyepieces. These have a great purple anti-reflective

coating. I doubt you will find these anywhere else!

Quality lens! We have a large supply of these if you
want to incorporate them in your project! Also makes a nice addition to
your military optics collection.

L3492 $8.00 or 10 for $60.00

Page 4 - Achromats

To Order, call toll free: 1-877-7SURPLUS

24MM DIA, 40MM FL TRIPLET UNCTD

These cemented triplet achromats are unused! Edge

thickness is 9mm. Focal length is 40mm. Diameter is

24mm. We have a lot of these so if you need them for

a project, we can supply them!

L3504 $8.00 or 5 for $35.00

Antiques

ANTIQUE 41MM RETICLE

A great find. These are in the original package. Marked

"STOCK NO. 2060. ONE RETICLE - MARK 1. DIAME-

TER 41 MMS. EDMUND SALVAGE COMPANY. P.O.

AUDUBON, NEW JERSEY. Looks like war surplus,

probably for one of the military scopes. 41mm diameter

by 5mm thick. Has vertical and horizontal dashed lines

going 3/4 of the way up the center. Markings on left
and right side: 8, 12, 16, 20, 24, and 28.

A1601 $4.00

ANTIQUE RETICLE FOR MILITARY M70F TELESCOPE

Unused in original packaging, dated in the 1940's.

Reticle made for the military M70F telescope. 27.4mm

diameter by 3.1mm thick. Has small cross hair and ver-

tical and horizontal dashed lines going 1/2 of the way

down from the center. Markings on left and right side:

8, 16, 24, and 32.

A1604 $4.00

Beamsplitters

15MM COATED CUBE BEAMSPLITTER

Unused beauty in original packaging. 15mm X 15mm

cube beamsplitter. Transmission and reflection is in

the ratio of 50/50. Made of BK7 with surface quality

60/40. Angle tolerance is +- 3 arc min and flatness is

1/2 wave. All sides are anti-reflection coated.

Edmund's 15mm X 15mm sells for $118.80

L2046D $19.00

Beamsplitters - Page 5

Surplus Shed – www.SurplusShed.com

30MM COATED CUBE BEAMSPLITTER

Unused beauty in original packaging. 30mm X 30mm

cube beamsplitter. Transmission and reflection is in

the ratio of 50/50. Made of BK7 with surface quality

60/40. Angle tolerance is +- 3 arc min and flatness is

about 1/2 wave. All sides are anti-reflection coated.

Edmund's 30mm X 30mm sells for $157.50

L2047D $35.00

40MM COATED CUBE BEAMSPLITTER

Unused beauty in original packaging. 40mm X 40mm

cube beamsplitter. Transmission and reflection is in

the ratio of 50/50. Made of BK7 with surface quality

60/40. Angle tolerance is +- 3 arc min and flatness is

about 1/2 wave. All sides are anti-reflection coated.

Edmund's 40mm X 40mm sells for $240.90

L2048D $45.00

20MM COATED CUBE BEAMSPLITTER

Unused beauty in original packaging. 20mm X 20mm

cube beamsplitter. Transmission and reflection is in

the ratio of 50/50. Made of BK7 with surface quality

60/40. Angle tolerance is +- 3 arc min and flatness is

about 1/2 wave. All sides are anti-reflection coated.

Edmund's 20mm X 20mm sells for $125.90

L2069D $25.00

MIRROR TYPE GLASS BEAMSPLITTER, 50MM SQ

Beamspitter appears to be 25% transmittance and 75%

reflective. 50mm long x 50mm wide. Unused.

M3014 $2.50

Binocular Parts

ZEISS 6X30 OBJECTIVE CELL RETAINING RING

Unused in the original packaging. Holds your binocular

objective in place! Original Zeiss metal ring measures

37mm (OD), 2mm thick.

B1001 $1.50

Page 6 - Binocular Parts

To Order, call toll free: 1-877-7SURPLUS

ZEISS 6X30 BRASS AXLE

Unused in the original packaging. This is used to link

the left and right side barrels together. 55mm long,

7mm diameter threaded on one side, 13mm diameter

with 2mm center hole on the other.

B1002 $4.00

ZEISS 6X30 OBJECTIVE COVER, RIGHT

Unused in the original packaging. Here's another great

original Zeiss part for your 6x30 binoculars. 40mm

threaded opening, 5mm thick. Box is labeled as: DWG

No-A-1530.

B1003 $4.50

ZEISS 6X30 OBJECTIVE COVER, LEFT

Unused in the original packaging. Here's another

great original Zeiss part for your 6x30 binoculars.

40mm threaded opening, 5mm thick. Box is labeled as:

DWG A-1537

B1004 $4.50

ZEISS 6X30 EYEPIECE ADAPTER BARREL FOCUS INSIDE

Unused in the original packaging. This is the adapter

that goes inside the focuser. Threaded throughout but

these do not have optics. 28mm long, top inside

threaded diameter is 20mm, outside diameter of 21mm.

Bottom inside threaded diameter of 14mm (appears to

be brass), outside diameter of 20mm.

B1005 $4.00

ZEISS 6X30 LEFT COVER PLATE PRISM COVER

Unused in the original packaging. This is the prism cover

for the left side of your Zeiss 6x30 binoculars. 25mm

diameter hole, 5mm thick.

B1006 $4.50

Binocular Parts - Page 7

Surplus Shed – www.SurplusShed.com

ZEISS 6X30 RIGHT COVER PLATE PRISM COVER

Unused in the original packaging. This is the prism cover

for the right side of your Zeiss 6x30 binoculars. 25mm

diameter hole, 5mm thick.

B1007 $4.50

ZEISS 6X30 BINOCULAR PARTS KIT

This kit includes all the non-optical parts

you need to fix your Zeiss binoculars or

make like new, with the exception of the

body. These original Zeiss parts are all

unused in the original packaging. 26
pieces included all in your very own brown paper bag!
Includes eyecups that are very hard to come by! Our
understanding is that not only will this set fit the Zeiss
6x30 binoculars, but they used the same parts for the
individual focus 8x30. A rare military collectible or
resell your reconditioned binoculars to make $$$!!

B1008 $49.00

ZEISS 6X30 INTER PUPIL DISTANCE SCALE

Unused in the original packaging. 20mm diameter origi-

nal Zeiss distance scale marked 60-70.

B1009 $3.00

PAIR OF WWII BAUSCH & LOMB 7X50 PRISM COVERS/FOCUSING
ASSEMBLY UNUSED!

Heres a very rare find! Original WWII 7x50 binocular

parts in the original packaging!! Use these to make your

old binoculars even more valuable! Focusers adjust very

smoothly. No optics in these assemblies. Some are even

stamped: U.S. Navy, BU.SHIPS MARK 28, MOD.0

203238, 1943.

B1010 $20.00

Page 8 - Binocular Parts

To Order, call toll free: 1-877-7SURPLUS

WWII BAUSCH & LOMB 7X50 OBJECTIVE MOUNT UNUSED

Here's another great part to restore your old B&L

7x50 binoculars. These are unused in the original B&L

packaging intended for use by the US Navy. Labeled as

part# 29422-62. Another military collectable. We

doubt you can find these new anywhere else!

B1011 $5.00

BAUSCH & LOMB BUBBLE SEXTANT LENS "B" BUBBLE

Here's the "B" lens for a 61-90-04 bubble sextant, in

the original Military issued B&L packaging dated NOV

1945. The plano concave lens is 31mm diameter and

4mm thick with a focal length of -174mm. The center

has a 20mm reticle. High quality optical glass and a

rare Military collectible!

B1016 $6.50

BAUSCH & LOMB BUBBLE SEXTANT
LENS "A" BUBBLE

Here's the "A" lens for a 61-90-04 bub-

ble sextant, in the original Military issued

B&L packaging dated NOV 1945. The

plano convex lens is 31mm diameter and

4mm thick with a focal length of 174mm.
When combined with PCV "B" lens it acts like a window.
The center has a 20mm reticle. High quality optical glass
and a rare Military collectible!

B1017 $6.50

WWII EYE GUARD FOR M-17 BINOCULAR

These are in the original Military packaging unused!

Manufactured by Westinghouse, the box is labeled:

DRG No.: B-7638085 and Code No.: F238-763-8085.

Box is dated Nov 1944. These are threaded (33mm) to

easily screw on to your M-17 binoculars. Get them to

restore your old binoculars to new or as a great mili

-

tary collectible.

B1018 $3.00 or 2 for $5.00

Binocular Parts - Page 9

Surplus Shed – www.SurplusShed.com

WWII MOUNTED 7X50 BINOCULAR OBJECTIVE

Unused in the original military packaging! These appear

to fit the Spencer 7x50's. Front clear lens diameter

of 50mm, barrel is 60mm. Rear clear lens diameter of

50mm, inside threaded barrel is 55mm. The barrel is

25mm long. Focal length is 190mm. Beautiful

bluish/purple anti-reflective coating.

B1022 $30.00

UNUSED WWII 7X50 RUBBER EYEGUARD

These are unused in original B&L military packaging.

Will fit most of the WWII 7x50 binoculars! Bottom

opening measures 28mm, outer ring is 36mm diameter.

A rare find! These will fit some of our current 2" and

1-1/4" eyepieces (L2008A, L1837A, L3148, L3149.

L3142, L3190, L3251), some of our sold out ones, and

lots of others. Metal ring can be removed for slip in or
slip over where needed.

B1023 $3.00 or 2 for $5.00

M1 POLARIZING FILTER FOR M15 & M17 NIB 1948

A great find for the vintage U.S. Military binocular col-

lector! Has two sets of mounted Polaroid filters with a

side control to rotate one filter with respect to the

other, and each set rotates at the same time. This

should gradually lighten or darken the incoming light

that goes to your binocular objectives. However, these

are old and some of the filter material may have dete­riorated. Manufactured by Beck-Lee Corporation, this M1 filter assembly
attaches over the eyepieces of the M15 and M17 7x50 U.S. military binocu­lars (those without eye guards). Each unit measures 4" wide x 3 3/4" high x
1" deep, with black-enameled metal frame with dual 3/4" diameter glass fil­ters, knurled focus tabs, and 1/4" rear wells with ten metal pressure tabs
for press-on application of the assembly. SNL Stock No. F238-5800227,
stamped July 1948. Made by the Beck-Lee Corporation. Nice military col­lectable. Complete with original box. Supplies are limited.

B1024 $15.00

BAUSCH & LOMB 7X50 BINOCULAR PORRO PRISM

These are brand new in the original B&L military pack-

aging dated back to the early 50's. Hypotenuse is

52mm long x 25mm wide, faces are 35mm x 24mm. If

you need replacement prisms for your old 7x50's you

are in luck!

B1025 $6.00 or 2 for $10.00

Page 10 - Binocular Parts

To Order, call toll free: 1-877-7SURPLUS

B & L 7X50 BINOCULAR OBJECTIVE 52MM DIA X 190MM FL

These are unused in the original Bausch & Lomb packag-

ing but have been in storage for some time so some

may have cement problems. Bluish/purple anti-reflec-

tive coating. Fits most 7x50 WWII binoculars among

many others. 3/8" thick. The best will go out first!

B1026 $15.00

B & L WWII 7X50 DIOPTER SCALE FOR MARK 28 MOD 0

These fit a number of the WWII 7x50 binoculars but

were made for the Bausch & Lomb Mark 28 Mod. 0.

Knurled Top has opening diameter of 25mm and bottom

opening is 35mm. 18mm long. Unused from WWII!!

B1027 $3.00 or 2 for $5.00

WWII 7 X 50 BINOCULAR RETICLE, 25MM DIAMETER

Great unused glass 7x50 reticle, 25mm diameter x

1.8mm thick. This has a horizontal scale 6mm from the

bottom with 2 additional center lines above the middle

of the scale. Labeled in increments: 40,30,20,10,(cen-

ter),10,20,30,40. In the original military packaging.

B1029 $3.75

WWII B&L 7X50 MARK 28 COVER GASKET

Original Bausch & Lomb WWII binocular part! Will fit

the Mark 28 and numerous others. Used to seal the

area between the prism and ocular. Unused.

B1030 $0.75

WWII B&L 7X50 MARK 28 OBJECTIVE GASKET

Original Bausch & Lomb WWII binocular part! Will fit

the Mark 28 and numerous others. Measures 53mm

(ID) and 63mm (OD). Unused

B1031 $0.75

Binocular Parts - Page 11

Surplus Shed – www.SurplusShed.com

EYEPIECE HOUSING FOR HAYWARD 7X50 BINOCS

Rare left side metal eyepiece housing for the military

Hayward 7X50 binoculars. This sure is a find if you can

use it. 3-1/2" long by 2-1/2" wide. Opening for the

optics is 1". Has (3) 1" long legs. If you repair binocu-

lars, you need a few of these. Unused

B1032 $12.50

NNEEWW!!

UNIVERSAL 6X30 BINOCULAR EYE GUARDS/CUPS FOR M9

These were made for the M9 military 6x30 binocular

but will fit numerous other 6x30's. The top is 33mm

diameter (opening is 16mm), the bottom threaded

inside barrel measures 21mm. 10mm thick.

B1033 $1.25 or 10 for $10.00

NNEEWW!!

PRISM SHELF/HOLDER FOR M15 & M16 7X50 BINOCULARS

Need a replacement prism holder for your 7x50 binocu-

lars? This is exactly what you need! Will fit many of

the 7x50's, but was made for the M15 & M16. Prism

bracket included to securely hold you prisms in place.

B1034 $3.00

NNEEWW!!

UNUSED WWII 7X50 BINOCULAR BODY/SHELL RIGHT SIDE

These make great replacements for your damaged

7x50's (they fit B&L WWII binocs) or to make a quali-

ty monoscope. In mint original condition! Measures 5-

3/4" long, quality machined pieces!

B1035 $15.50

NNEEWW!!

7X50 WWII BINOCULAR EYE GUARD

These will fit many of the 7x50 WWII binoculars (as

well as modern brands). The top is 35mm diameter

(opening is 22mm), bottom threaded barrel is 31mm.

9mm thick.

B1036 $1.50 or 10 for $12.00

Page 12 - Binocular Parts

To Order, call toll free: 1-877-7SURPLUS

NNEEWW!!

UNUSED WWII LEFT M6 6X30 PRISM COVER

Made by Universal Camera Corp. in the original military

packaging marked "1944". Will fit numerous 6 x 30

binoculars, but intended for the M6. Unused, a rare

find! Limited supply.

B1037 $10.00

NNEEWW!!

WWII M13 6X30 LEFT PRISM COVER/LENS HOUSING

These are used but in very good condition. Stamped

"Binocular M13 6x30". A rare find!

B1038 $8.00

NNEEWW!!

WWII 6X 30 MARK 33 RIGHT PRISM COVER/FOCUSING

EYELENS HOLDER

These are used but in very good condition. Stamped

"U.S. Navy BU. Ships Universal Camera Corp".

B1039 $12.00

NNEEWW!!

WWII B&L BUBBLE SEXTANT EYEGUARD

Original unused eyeguard to fit on your vintage WWII

Bubble Sextant. Marked as B&L DWG No.: 29710-24,

Used on 61-90-04 Bubble Sextant. The top measures

50mm diameter (opening is 25mm), bottom measures

40mm, bottom opening is 28mm. Could be used on 2"

telescope eyepieces or possibly even binoculars. Unused.

B1040 $6.00

NNEEWW!!

WWII BINOCULAR PARTS GRAB BAG

We recently purchased a large inventory of WWII binocular parts. This
grab bag may include: objectives, housings, prisms, prism covers, eyepieces,
binocular cases, even binoculars in need of repair. You will get anywhere
from 10-20 items in all. You wont be disappointed! If you have a prefer

­ence (6x30 or 7x50 parts), please indicate your choice in the comments sec­tion of the order form.

B1111 $25.00

Binocular Parts - Page 13

Surplus Shed – www.SurplusShed.com

PCV FLINT FOR HAYWARD 7X56 BINOCULAR OBJECTIVE

Haward Part #B7-3N, made by Hayward Optical Glass
Co. Plano Concave lens is 56mm diameter x 8mm thick
with a focal length of -133mm. These are perfect if
you are in need of a replacement flint for your dam­aged binoculars! Used, but in very good condition

L3579 $8.00

OBJECTIVE COVER FOR STEINER 6X30 BINOCS

Unused and made for the quality Steiner 6x30 military
binoculars. Brown rubber, 1.7" ID with a 2" long handle.
Also fits eyepieces of some of the larger binoculars
such as 14x70.

M1601 $0.50 or 10 for $4.00

RAINGUARD/EYEPIECE COVER FOR STEINER 6X30 BINOCS

Unused and made to fit the eyepieces of the quality
Steiner military 6x30 binoculars. 4" long by 1-1/2"
wide. Has places for a strap. Brown rubber.

M1602 $1.00 or 10 for $8.00

WWII M16 BINOCULAR SEPARATOR

These are unused in the original military packaging from
1944! Made by the Nash-Kelvinator Corp.. These are
labeled as: Ord. Drg. No. A204259, SNL Stock #
F238-5204259. Front opening measures 1", rear open­ing is 5/8" x 1" long. Made of aluminum. If you have an
M16 binocular then these are for you. If not, then get
them because they are a rare find and military collectible!

M2630 $3.75 or 10 for $30.00

NNEEWW!!

GERMAN MADE SMALL BINOCULAR/PARTS CASE

Here's a virtually unused brown binocular case with shoul

­der strap. Use it for small pair of binoculars, camera, tel­escope eyepieces, eyeglasses, or carry in car to store
your registration/insurance. For the ladies, use it as a
makeup kit. 101 uses! Measures 6" x 4-5/8" x 2" thick .
Shoulder strap is 30" long. Stamped "Made in Germany".

M2669 $5.00

Page 14 - Binocular Parts

To Order, call toll free: 1-877-7SURPLUS

Binoculars

WWII BRITISH MADE OFFICER'S POLISHED BRASS BINOCULARS

Rare WWII 6x30 porro prism binoculars. Made in
the early 1940's by the best British optical houses.
Prism and objective covers have been polished
(could use a bit more elbow grease). These will look
super in your office or living room. Quality optics
throughout provide great sharp images. Individual
focusing eyepieces. Vintage canvas case included.

Excellent condition.

T1409 $75.00

MILITARY PERISCOPIC BINOCULARS

Made for the Czechoslovakian People's Army and
used in tanks. The coated optics deliver a crisp
and bright 4x view with a reticle overlaid in the
right-hand eyepiece. Rubber eyecups make for
comfortable viewing and both eyepieces are fully
focusing. An unusual quick-release turret assembly on
top allows for rapid cleaning of the objectives, prisms,

etc. Top and bottom mounting brackets. Has a knob adjustment for the
distance between your eyes, and a head rest. Heavy duty construction.
Excellent condition.

T1471 $85.00

MILITARY PERISCOPIC BINOCULARS W/CASE & ACCESSORIES

Like new with original wood case. Made for the
Czechoslovakian People's Army and used in tanks.
The coated optics deliver a crisp and bright 4x view
with a reticle overlaid in the right-hand eyepiece.
Rubber eyecups make for comfortable viewing and
both eyepieces are fully focusing. An unusual quick­release turret assembly on top allows for rapid cleaning

of the objectives, prisms, etc. Top and bottom mounting brackets.
Has a knob adjustment for the distance between your eyes, and a head
rest. Heavy duty construction. Includes spare top prism assembly, extra
rubber eyeguard, lens cleaning cloth, stamped military paperwork, passport,
and instruction manual (not in English). These are beauties and we only
have a few.

T1475 $125.00

Binoculars - Page 15

Surplus Shed – www.SurplusShed.com

IRON CURTAIN 6 X 30 MILITARY PRISM BINOCULARS

Made in the early 1950's in one of the Iron Curtain
countries such as Bulgaria, these are rugged military
porro prism binoculars complete with original leather
case and leather eyepiece cover. Quality coated
optics with individual focus eyepieces. Has range
reticle in the right eyepiece. Designed to resist dust,
etc. Used but in very good condition.

T1484 $39.95

KERSHAW MK3 BINO PRISM WWII FIELD BINOCULARS

These British-produced British military binoculars
are rugged construction, intended for field use
during World War II. The Kershaw MK3 features a
porro-II prism design for improved light transmission,
and 6x magnification. The four base ports allow
for nitrogen purging to eliminate the fog-prone
oxygen otherwise present in the optical path,

and drying of all internal parts should the unit be water-saturated.
Focusing is available for each eye. Each unit has a black-enameled
brass body, coated optics, is marked BINO PRISM No. 2 MK3, X6,
GRATICULES 1/2” APART AND 1/4” 1/2” AND 1” HIGH. Made
between 1943 and 1944. These have seen the field, but are in very
good working condition. Great military collectable that you can use and
at a great price.

T1508 $49.00

TASCO 8 X 21MM COMPACT RUBBER ARMORED BINOCULARS
WITH CASE

Model #89721RB, InFocus by Tasco. These are great,
coated, roof prism binoculars complete with cleaning
cloth, neck strap and case. Quality glass coated optics
with roof erecting prisms, achromatic cemented dou­blet 21mm diameter glass objective lenses and glass 3
element eyepieces. Center focus with right eyepiece
focus adjustment. 128M/1000M. Nice sharp images in

a compact size that's easy to carry anywhere. Get one for yourself and
some for gifts. New.

T1523 $12.50

Page 16 - Binoculars

To Order, call toll free: 1-877-7SURPLUS

Books

TECH MANUAL FOR T-11/KC-1 AERIAL CAMERAS

One of our customers got his hands on the Operation
and Maintenance Technical Manual, the Overhaul
Technical Manual, and the Illustrated Parts Breakdown.
We had some copies made and bound. There's about
300 pages. Covers Aerial Mapping Camera Type T-11,
KC-1, KC-1B, and KC-9A.

M1498 $30.00

MILITARY OPTICAL DESIGN HANDBOOK

Complete reprint of this classic, hard to find 630 page
book. this handbook was developed by the Department
of Defense with the assistance of a leading optical
manufacturer. It provides engineering personnel with
an introduction to optical theory, and treats to an
advanced level the fundamentals and principles of opti­cal design.There are 26 sections, an appendix and a

comprehensive index. There are 20 pages on eyepieces, 25 pages on mirror
and prism systems, 25 pages on telescope objectives. Sections on micro­scope optics, infrared optical design, optical material, optical tests, coating,
etc., etc. Military Standardization Handbook #MIL-HDBK-141, 5 October

1962. Lots of the optics referenced are available surplus.

M1514 $50.00

BOOK OF GERMAN MILITARY OPTICAL EQUIPMENT

Here's a book with the specs of German military binoc­ulars and other optical equipment. Lots of interesting
info and photos in this 92 page soft cover book. Only
problem is that it's written in German. If you can read
German, you need this. If not, it's easy to figure out
what each spec means. Great photos and some very
unusual instruments defined. Unused.

M2050 $17.50

FIBER LIGHTING BOOK FOR THE HOBBYIST AND CRAFTSMAN

This 36 page soft cover book by Walter A. Baldwin
includes the basic principles of fiber lighting as well as
basic construction techniques, craft applications and
ideas. Fully illustrated with diagrams and photos. This
is a great introduction to the use and application of
fiber lighting in creative craft projects.

M2117 $4.50

Books - Page 17

Surplus Shed – www.SurplusShed.com

192 PAGE POPULAR OPTICS "HOW TO" BOOK

If you are interested in experimenting with optics,
building optical instruments, or just learning, this is the
book for you.Here is the main breakdown of the book:
The Optical Bench, Graphical Ray Tracing, Basic Optical
Math, All about Magnifiers, How to Condense and
Project Light, Optical Drawing Devices, Telescopes you
can Build, Homemade Telephoto Systems, and Fun with

Optics.Included is info on finding focal length, all kinds of info on different
types of lenses and their uses, image formation, testing, determining the
power of a magnifier, field of an eyepiece, make a telescope into a micro­scope, all kinds of info on projectors, Camera Lucida, reflector and refrac­tor telescopes and inexpensive pipe mounts and tripods, making cradles, info
on telephoto lenses and how they work and designs, how to make a simple
spectroscope, etc., etc. 192 pages of interesting and fun stuff to do with
optics. These are new and the latest edition.

M2291 $14.95

Bulbs/Lamps

FLAME TIP BULB, 2.2 VOLT, .25A, MINI SCREW BASE

Low voltage, works with 1-1/2 volt batteries or your
solar cells. Package of 4.

M2105P $0.65

8 WATT U-BEND TYPE FLUORESCENT BLACKLIGHT BULB

FTB-8T6-BL 8 Watt blacklight fluorescent bulb. Black
light is the popular term for ultraviolet energy near the
visible spectrum. Blacklights are used for a wide variety
of applications including color matching, curing, sanitiza­tion, particle identification, art display, recreation,
automotive, R12 chemical leak detection, and lots of fun
stuff. We couldn't find these specific ones listed any-

where so we may be the only source for these replacement bulbs for your
blacklight devices. U Bend shape with 4 pin base. We've been told that
there are adapters that will allow you to screw these into a regular light
socket, but haven't found them yet. Unused.One of our customers advises
that this works in his 15 Watt Bug Zapper which needs UV!

M2138 $1.50 or 10 for $10.00

Page 18 - Bulbs/Lamps

To Order, call toll free: 1-877-7SURPLUS

ANTIQUE WESTINGHOUSE MAZDA #1491 AUTO LAMPS - ORIGI­NAL BX 10 BULBS

Original unused boxes of ten Westinghouse Mazda
#1491 automobile lamps (.8 amps, 2.4 volts) for the
antique automobilia collector or antique car owner.
Each original orange and black Westinghouse Mazda
cardboard box (6 1/2" long x 2 1/2" deep x 2 1/2" high)
holds ten unused bulbs in a cardboard insert. The end
of the box indicates that these are G8 bulbs with DC

bayonet base.

M2306 $15.00

SYLVANIA 625T2-1/2Q/CL/S COPIER LAMP

Made for photocopiers. 12-1/2" long by 5/16" diame­ter. Unused in original packaging

M3020 $5.00

MINI STROBE TUBE & REFLECTOR

Bright Xenon strobe tube and reflector is 0.96 inches
by 0.89 inches by 0.74 inches deep. Unused with 2
copper tabs for anode & cathode and 1 aluminum tab
for trigger lead.

R3118 $1.00 or 10 for $8.00

Camera Lenses

35MM STEREO CAMERA LENS/SHUTTER ASSY

This is the complete integrated lens and shutter
assembly made for the Revere 35mm stereo cameras.
Dual quality coated camera lenses made by Wollensak
of Germany with iris control from f/3.5 to f/22. One
turn of the control adjusts both lenses. Shutter
speeds from 1/2 second to 1/200 second with "B" and
"T". Cock the shutter and release, both go at the same

time. Coated optics. If you have ever wanted to build a 35mm stereo cam­era to take photos to use in your stereoscope, here's your opportunity. Or
just get it for the two camera lenses, etc. Unused.

L2084 $19.50

Camera Lenses - Page 19

Surplus Shed – www.SurplusShed.com

WOLLENSAK 160MM F/4.5 RAPTAR LENS SET

Unused beauties. Lens set consists of
two mounted lens assemblies that were
designed to go onto either side of the
iris/shutter assembly for one of the
cameras. We don't have the exact specs

or spacing. Coated optics. Front assembly is 2-1/8"
diameter (clear lens diameter is 1-3/8" diameter. Rear
assembly is 1-3/4" diameter (clear lens diameter is 1­1/4". Focal length is 160mm. Only have a few.

L3096 $25.00

STEINHEIL CAMERA LENS/IRIS/SHUTTER ASSY

45mm, f/2.8 Steinheil Anastigmat camera lens assem­bly. Coated optics. Made in Germany. Has iris adjust­ment and shutter speed adjustment. Looks like the
slowest speed is about 1 second, but we don't have the
equipment to determine the fastest speed. We don't
know what camera this was made for or what film for­mat, but at this price it will be great to experiment

with. Assembly is 40mm diameter by 22mm deep. Clear front and rear lens
diameter is 15mm. Steinheil made quality optics.One of our customers
believes that this was originally made for the Bosley Jubilee, an American­made rangefinder 35mm camera from around 1955 or so (we have not con­firmed it). Thanks Mike.

L3359 $12.00

35MM STEREO CAMERA LENS/SHUTTER ASSY­MECHANICAL PROBLEMS

This is the same as our L2084 except something does­n't work. Made for the Revere 35mm stereo cameras.
Lenses are in mint condition but the shutter may not
cock correctly, or both iris diaphragms may not move in
tandem, or some other mechanical problem. Here's a
great opportunity to get two good 35mm f/3.5 camera
lenses with coated optics as well as a mechanical chal

-

lenge for a very low price.

L3371 $10.00

Page 20 - Camera Lenses

To Order, call toll free: 1-877-7SURPLUS

Cameras

KB18A MILITARY PANORAMIC AERIAL CAMERA W/ZEISS LENS

Designed for the U.S. Air Force for use in
fighter/bomber aircraft or reconnaissance aircraft. It
scans 180 degrees for photographic assessment of
strike mission damage. It has automatic exposure con­trol and a double Dove prism that rotates to provide
the 2.25" by 9.40" image format. Takes 70mm by 250
ft. roll film. Has great resolution with the Carl Zeiss

3" focal length f/2.8 lens. Angle of view is 41 degrees, 6 seconds by 180
degrees. Shutter speeds from 1/100 to 1/4000. 300 exposures per roll of
film. For unmodified use, needs 28VDC and 115VAC, 400 Hz. Partial manual
copy included. Excellent condition. Manual copy included. Our low price was
$375.00. Now closing them out!

I1433 $275.00

KB-18B MILITARY PANORAMIC AERIAL CAMERA
W/ZEISS LENS

These are unused, mint condition and
include the camera control and body
cover. The camera is the same design as
the KB-18A except that the magazine
assembly has been improved.Designed for

the U.S. Air Force for use in fighter/bomber aircraft or
reconnaissance aircraft. It scans 180 degrees for pho­tographic assessment of strike mission damage. It has
automatic exposure control and a double Dove prism that
rotates to provide the 2.25" by 9.40" image format.
Takes 70mm by 250 ft. roll film. Has great resolution
with the sharp Carl Zeiss 3" focal length f/2.8 lens.
Angle of view is 41 degrees, 6 seconds by 180 degrees.
Shutter speeds from 1/100 to 1/4000. 300 exposures
per roll of film. For unmodified use, needs 28VDC and
115VAC, 400 Hz. Modification suggestions included for
land use. We do not have cables. Manual copy included.

I1475 $475.00

Cameras - Page 21

Surplus Shed – www.SurplusShed.com

COLOR CMOS CAMERA <$10

ZoomCam ISA Model 1575 made by Zoom Telephonics.
These are unused and include a 10 foot cable with fer­rite noise filter and 9-pin circular mini-DIN plug to con­nect into your video-ready faxmodem or video capture
card (modem or card not included). This camera has a
lot of features and a wealth of parts. Includes a high­quality f/1.9 multi-element anti-reflection coated lens

with a focal length of 4.8mm and a 50 degree wide angle field of view.
Adjustable focus from 2 inches to infinity. The camera automatically
adjusts for exposure, contrast, backlight, and fluorescent light "flicker" for
high performance over a broad range of light conditions. Resolution is 352
X 288 pixels. It uses an advanced CMOS array to provide high resolution
color live action video or point-and- click imagecapture. With a little cre­ativity you should be able to adapt this to an unlimited amount of uses. Will
run off 9 volts DC. Power consumption is 600mW nominal, 48mW sleep
mode. We don't have schematic diagrams, so you will have to do some trac­ing to see what each pin goes to. Should be a fun and rewarding project.
There are drivers that can be downloaded from
http://www.zoom.com/ts1/cam/isa.shtml. The case is a contemporary
design with weighted base and only 1.88" wide by 3.3" long by 2.43" high and
has a standard mount for camera tripod. Take a look at all 3 photos to get
a better idea of what you will get for such a pittance. Unused

R1460 $9.75

Compass Parts

JOHN E. HAND 2-1/2" NAVY COMPASS CARD

If you have one of the Navy John E.
Hand military compasses that needs a
replacement compass card, you are in
luck! Made of aluminum, the card is 2­1/2" diameter and has degrees in 10's

with markers at the half way spot and lines for each 2
degrees This is an original John E. Hand & Sons of
Philadelphia part. If you don't have a compass to put
these in, this should make a nice collectable. Put it in a
frame with our M2179 and M2181 and hang it on the wall
in your family room or office.

M2180 $5.00

Page 22 - Compass Parts

To Order, call toll free: 1-877-7SURPLUS

JOHN E. HAND 4-7/8" MILITARY COMPASS CARD

If you have one of the John E. Hand military compasses
that needs a replacement compass card, you are in
luck! Made of aluminum, the card is 4-7/8" diameter
and is different from the other ones we have in that
the degrees are in two levels and go around the card
about 3/4 of the way. This is an original John E. Hand
& Sons of Philadelphia part. If you don't have a com-

pass to put these in, this should make a nice collectable. Put it in a frame
with our M2179, M2180 and M2181, and hang it on the wall in your family
room or office.

M2195 $7.50

JOHN E. HAND 2-1/2" DIAMETER MILITARY COMPASS CARD

If you have one of the Navy John E. Hand military
compasses that needs this replacement compass
card, you are in luck! 2-1/2" diameter black-enameled
aluminum with white numerics and notations, has
degrees in 10's with markers at the half way spot
and lines for each 2 degrees, with additional directional
pointers and reversed numerics for mirrored

compasses. Includes attached center spindle and bottom 4-hole mounting
bracket. This is an original John E. Hand & Sons of Philadelphia part. If
you don't have a compass to put these in, this should make a nice nautical
collectable. Put it in a frame with our M2179, M2180, and M2181 for display
in your family room or office.

M2207 $7.00

JOHN E. HAND 4" MILITARY COMPASS CARD

If you have one of the John E. Hand mili­tary compasses that needs a replacement
compass card, you are in luck! Made of
aluminum, the card is 4 inches diameter.
This is an original John E. Hand & Sons

of Philadelphia part. If you don't have a compass to put
these in, this should make a nice collectable. Put it
in a frame with our M2179, M2180, M2181, M2195,
and/or M2207 and hang it on the wall in your family
room or office.

M2408 $7.50

Compass Parts - Page 23

Surplus Shed – www.SurplusShed.com

JOHN E HAND BRASS COMPASS POINTER

Made for one of the military compasses that the John
E. Hand company was famous for. Not sure which one.
5-1/2 inches long. With a bit of elbow grease, these
should polish up quite nice. A rare find if you need one
. Nice collectable if you don't.

M2561 $5.00

Educational Optics

EDUCATIONAL SET OF 50MM LENSES

Set of 6 lenses, 50mm diameter. Made of glass with
polished faces and ground edges. Set consists one
each of the following: double convex, plano-convex,
converging concave-convex, diverging convex-concave,
double concave, and plano-concave. Set comes in a
hinged wood display box.

L1875D $12.00

EDUCATIONAL DCX 38MM X 50MM

Part of our educational optics series. Double convex,
spherical glass lens, with a focal length of approx.
50mm and diameter of 38mm. Made of glass with pol­ished face and ground edges. Refractive index is
approx. 1.52. Unused and individually boxed. Perfect
for educational projects, but focal length is not in close
tolerance from lens to lens, so not good for use in a

product you are going to manufacture where the focal length needs to be
exactly the same.

L1901D $1.50 or 10 for $12.00

EDUCATIONAL DCX 38MM X 75MM

L1902D $1.40 or 10 for $11.00

EDUCATIONAL DCX 38MM X 150MM

L1903D $1.25 or 10 for $9.00

EDUCATIONAL DCX 38MM X 200MM

L1904D $1.25 or 10 for $9.00

Page 24 - Educational Optics

To Order, call toll free: 1-877-7SURPLUS

EDUCATIONAL DCX 38MM X 250MM

L1905D $1.25 or 10 for $9.00

EDUCATIONAL DCX 38MM X 300MM

L1906D $1.25 or 10 for $9.00

EDUCATIONAL DCX 38MM X 500MM

L1907D $1.25 or 10 for $9.00

EDUCATIONAL DCX 38MM X 1000MM

L1908D $1.25 or 10 for $9.00

EDUCATIONAL DCX 50MM X 50MM

Part of our educational optics series. Double convex,
spherical glass lens, with a focal length of approx.
50mm. Made of glass with polished face and ground
edges. Refractive index is approx. 1.52. Unused and
individually boxed. Perfect for educational projects,
but focal length is not in close tolerance from lens to
lens, so not good for use in a product you are going to

manufacture where the focal length needs to be exactly the same.

L1911D $1.75 or 10 for $12.00

EDUCATIONAL DCX 50MM X 75MM

L1912D $1.75 or 10 for $12.00

EDUCATIONAL DCX 50MM X 150MM

L1913D $1.50 or 10 for $10.00

EDUCATIONAL DCX 50MM X 200MM

L1914D $1.50 or 10 for $10.00

EDUCATIONAL DCX 50MM X 250MM

L1915D $1.50 or 10 for $10.00

Educational Optics - Page 25

Surplus Shed – www.SurplusShed.com

EDUCATIONAL DCX 50MM X 300MM

L1916D $1.50 or 10 for $10.00

EDUCATIONAL DCX 50MM X 500MM

L1917D $1.50 or 10 for $10.00

EDUCATIONAL DCX 50MM X 1000MM

L1918D $1.50 or 10 for $10.00

EDUCATIONAL DCX, 50MM X 667MM

Part of our educational optics series. Double convex, spherical glass lens,
with a focal length of approx 667mm. Made of glass with polished face and
ground edges. Refractive index is approx. 1.52. Unused and individually
boxed. Perfect for educational projects, but focal length is not in close tol­erance from lens to lens, so not good for use in a product you are going to
manufacture where the focal length needs to be exactly the same.

L1918DA $1.50 or 10 for $10.00

EDUCATIONAL DCV 38MM X -50MM

Part of our educational optics series. Double concave,
spherical glass lens, with a focal length of approx. ­50mm and diameter of 38mm. Made of glass with pol­ished face and ground edges. Refractive index is
approx. 1.52. Unused and individually boxed. Perfect
for educational projects, but focal length is not in close
tolerance from lens to lens, so not good for use in a

product you are going to manufacture where the focal length needs to be
exactly the same.

L1951D $1.50 or 10 for $12.00

EDUCATIONAL DCV 38MM X -75MM

L1952D $1.40 or 10 for $11.00

EDUCATIONAL DCV 38MM X -150MM

L1953D $1.25 or 10 for $9.00

Page 26 - Educational Optics

To Order, call toll free: 1-877-7SURPLUS

EDUCATIONAL DCV 38MM X -200MM

L1954D $1.25 or 10 for $9.00

EDUCATIONAL DCV 38MM X -250MM

L1955D $1.25 or 10 for $9.00

EDUCATIONAL DCV 38MM X -300MM

L1956D $1.25 or 10 for $9.00

EDUCATIONAL DCV 38MM X -500MM

L1957D $1.25 or 10 for $9.00

EDUCATIONAL DCV 38MM X -1000MM

L1958D $1.25 or 10 for $9.00

EDUCATIONAL DCV 50MM X -50MM

Part of our educational optics series. Double concave,
spherical glass lens, with a focal length of approx. ­50mm. Made of glass with polished face and ground
edges. Refractive index is approx. 1.52. Unused and
individually boxed. Perfect for educational projects,
but focal length is not in close tolerance from lens to
lens, so not good for use in a product you are going to

manufacture where the focal length needs to be exactly the same.

L1961D $2.00 or 10 for $16.00

EDUCATIONAL DCV 50MM X -75MM

Part of our educational optics series. Double concave, spherical glass lens,
with a focal length of approx. -75mm. Made of glass with polished face and
ground edges. Refractive index is approx. 1.52. Unused and individually
boxed. Perfect for educational projects, but focal length is not in close tol­erance from lens to lens, so not good for use in a product you are going to
manufacture where the focal length needs to be exactly the same.

L1962D $1.75 or 10 for $12.00

EDUCATIONAL DCV 50MM X -150MM

L1963D $1.50 or 10 for $10.00

Educational Optics - Page 27

Surplus Shed – www.SurplusShed.com

EDUCATIONAL DCV 50MM X -200MM

L1964D $1.50 or 10 for $10.00

EDUCATIONAL DCV 50MM X -250MM

L1965D $1.50 or 10 for $10.00

EDUCATIONAL DCV 50MM X -300MM

L1966D $1.50 or 10 for $10.00

EDUCATIONAL DCV 50MM X -500MM

L1967D $1.50 or 10 for $10.00

EDUCATIONAL DCV 50MM X -1000MM

L1968D $1.50 or 10 for $10.00

Electrical Components

NIDEC BETA V WISPER FAN

12VDC brushless fan #TA225DC. Nidec Model
M33404-18G. Has 7 blades and unit is 2-1/4" square.
Mounted on a metal frame that is 9-1/2" long with
holes to fit into a specific unit. Mounting can be easily
removed. Has 2-1/2" lead with 2 pin pc connector.
Includes fan guard.

M2027P $3.00

SUNON 60MM SQUARE 12VDC BRUSHLESS FAN

Unused Sunon 12VDC, 2.2W brushless fan
model #KDE1206PHSI. Fan is 60mm
square and 15mm deep with 12" leads.

M2152 $3.50

Page 28 - Electrical Components

To Order, call toll free: 1-877-7SURPLUS

TWO POSITION HEAVY DUTY TOGGLE SWITCH

Two position toggle switch made by Eaton Corporation.
Part number is 8951K163. Specification ranges are 10A
250VAC and 15A 125VAC with 4 contact connections.
Nice large, red switch is 3/4" long x 1/2" wide with 2
hole mounting bracket. Switch is 2" long from mounting
bracket to mounting bracket and is 1" deep. Unused.

M2162 $2.00

SWITCHCRAFT 2 POSITION DPDT SLIDER SWITCH

Switchcraft 2 position switch operates at 3A 125vac or
.5A at 125vdc. Aluminum housing is 1 3/8" long x 3/4"
wide with 2 mounting holes. Has 9 copper contacts on
rear of switch. Throw is black and 5/16" long. Unused.

M2166 $0.75 or 10 for $5.00

LIGHTED 3-COLOR, 3-POSITION SWITCH

Measuring 3" deep x 3/4" wide, this well-constructed
switch appears to be constructed for DC operation.
It's composed of a zinc frame, opaque three-position
flip lever with a small red, yellow, and green filter
attached to be rear, in front of a 1/2" long x 3/16"
wide bulb (up=green, center=yellow, down=red). The
lever is held in position by a series of insulated spring

steel tabs that each have a solder terminal in the rear of the switch. The
switch front panel has two 1mm threaded mounting holes.

M2186 $3.50

LEVITON 125/250VAC TURN SWITCH

Two position switch, measuring 20mm
long x 18mm wide x 30mm total depth
(20mm mast height). Threaded for
mounting in a 10mm hole, includes mount­ing hex nut and connection wiring (approx.

5" black, 25" red). Rated 3A @ 125V, 1A @ 250V,
1A @ 125VT.

M2188 $0.75 or 10 for $6.00

Electrical Components - Page 29

Surplus Shed – www.SurplusShed.com

JUD-CO PRESSURE PUSH ON/PUSH OFF SWITCH

Two-position switch, measuring 17mm long x 13mm wide
x 25mm total depth (17mm mast height). Threaded for
mounting in a 10mm hole, includes mounting ring and
connection wiring (three wires, each approx. 4" long).
No switch rating; wiring indicates 300V 80 degrees C.

M2189 $0.50 or 10 for $4.00

30MM WIRE-WOUND FERRITE RING/CORE

An interesting component for the electronics "do-it­yourselfer"! A 30mm diameter x 8mm high gray Ferrite
ring/core, wound with red plastic-insulated fine gauge
conductive wire. May have been designed as a filter
choke in a power supply, but no doubt you'll have other
ideas. We have a good supply, so if you build a product
that needs them, we've got the quantity you need.

M2199 $0.50 or 10 for $4.00

BATTERY HOLDER - 3 AA CELLS

A must-have for those DC battery-powered projects
and for quick replacement of an existing holder! New 2
5/16" long x 1 15/16" wide x 5/8" high black plastic 3­battery holders with contacts, springs, and pre-wired.

M2209 $0.35 or 10 for $2.50

115VAC 8-PIN MINI RELAY

Numbered 156-4157 and 242-20275, these small (1
1/8" long x 7/8" wide x 1 1/4" high) white plastic-cased
relays are great for the electronics hobbyist! Casing
includes a schematic diagram on the top. New bulk stock.

M2212 $0.75 or 10 for $6.00

DELTA 12VDC BRUSHLESS FAN, 120MM SQ.

Delta 12VDC, .33A brushless fan, model WFB1212M.
Roughly 130 CFM. The fan measures 120mm square x
25mm deep, with 11" leads to a MXT2-1 #2695 two-pin
female plug.

M2214 $5.00

Page 30 - Electrical Components

To Order, call toll free: 1-877-7SURPLUS

ALCO MS-250AR SINGLE-DIGIT RED MOSAIC READOUT

Similar to our M2225 (1/2" high x 1/4" wide digit and
1/16" diameter lower decimal point in a 3/4" high x 1/2"
wide screen area), except that they are non-hardwired
(9 tab connectors instead for soldering wiring connec­tions), and the lamp is rated slightly lower- 2.5V, 20mA.
Unused stock in original boxes.

M2244 $3.00 or 5 for $12.00

CHERRY 0.1 AMP 125VAC CONTACT SWITCH

High quality thinline AC contact switches. Each meas­ures 2" long (end of the lever to the end of the tab
contacts) x 3/8" wide, with C-shaped metal lever
extending 1/2" from the body, three tab connections
(NC, NO, & COM), and two 1/8" diameter mounting
holes (1" spread). 1/8" travel on the lever from off to
triggered position. Unused stock.

M2246 $0.50 or 5 for $2.00

LEVITON HARDWIRED AC BULB SOCKETS

Rated up to 660W, 250VAC, these standard bulb sock­ets feature black plastic surround, 1" diameter thread­ed aluminum insert, brass inner contact, dual hardwired
12" long nylon mesh-insulated stranded copper feeds,
and 7/8" long mounting bracket with 1/4" long 3/8" OD
threaded attachment collar. Unused stock.

M2254 $0.50 or 5 for $2.00

6 DIGIT 24VDC PANEL MOUNT COUNTER

Tamura Electric model #E650. 24VDC, 650mW, 10CPS.
White numbers on black background. 29mm wide by
22mm high by 35mm deep. Has 5 inch long 2 wire lead
with end plug. Unused.

M2419 $2.50

9V RED LED W/SWITCH, RESISTOR & LEADS

New This Week, 12/16/01Works off 9vdc battery.
Great for astronomy use with your dark adapted eyes,
or build into your equipment. LED is mounted on switch
assembly with 20 Ohm resistor, and 4-1/2" long leads
(center lead is positive).

R1439 $0.60 or 10 for $5.00

Electrical Components - Page 31

Surplus Shed – www.SurplusShed.com

SNAP MOUNT 6800 MICROFARAD CAPACITOR, 25VDC

Aluminum snap mount electrolytic capacitor, 6800
microfarad, 25 VDC. Length is 1.57" and diameter is 1".
These were made for Panasonic by ACOM division of
Matsushita Electric. Unused.

R1462L $0.85 or 10 for $7.00

7 FOOT, 3 CONDUCTOR ELECTRICAL CORD

Standard 3 prong AC connector on one end and the
other end has two wires tinned and the other has a
ground connector. Made by Victor Corp. 18 AWG,
Type SPT-2, 105 degrees C. Unused

R2004P $1.25 or 10 for $10.00

20 FOOT STEREO HEADPHONE CABLE

For connection between headphones and amp/receiver,
etc. Stereo 1/8" mini plug to stereo 1/4" phone jack.
Unused.

R2021L $3.00

20 AMP EMI LINE FILTER

SAE EMI #HP 1-20. Rated 20 amps, 115/250 VAC
50/60 Hz. Has 1/4" quick connect type terminals for
all electrical connections. 3-3/4" x 3-1/4" x 1-1/2".
Has 4 mounting holes off to each side.

R2030 $5.00

SANGAMO DUAL 3300 MFD AXIAL LEAD
ELECTROLYTIC CAPACITOR

Sangamo type 301AJT332U040B. Capacitor specifica

­tions are dual 3,300 microfarads, 40vdc, -55 degrees
Celsius to +105 degrees Celsius. Capacitor body is 3
9/16" long x 1" diameter and the aluminum tinned leads
are 1 3/4" long. Two leads from one side and one lead
from the other. Unused.

R2036 $1.50

Page 32 - Electrical Components

To Order, call toll free: 1-877-7SURPLUS

12VDC SOLENOID VALVE

Originally designed for use in automotive anti-pollution
systems, these valves are perfect for low volume vacu­um or air pressure applications. Normally open valve.
When energized, port closes and other port vents.
Plastic body purge valve, 50 PSID maximum operating
pressure. 30 ohm coil, draws 0.4 amps. PC mount sol­der terminals. 2-3/4" x 1" x 1-3/4". Unused.

R3041 $1.25

KLIXON/TI 250VAC, 1.5AMP CIRCUIT BREAKER

Single pole circuit breaker, Model #51MC2-123-1.5.
Has toggle type on/off. 250VAC, 60 Hz, 1.5 amps.
Behind panel curve 123. 2" x 2" x 0.75".

R3042 $1.25

CENTRALAB 5 POSITION, 4 POLE ROTARY WAFER SWITCH

These were made by Centralab for H.H.Scott. PC
mount with 1/4" diameter by 1/2" long shaft. 3 wafers
are shorting and back wafer is non-shorting. Unused.

R3043 $4.50

RED LED WITH 8" LONG CABLE AND MINI PHONE PLUG

Mini phone plug on one end and red LED on the other.
Should make a good panel indicator as the plastic LED
holder will fit snug in a panel hole. Cut the cable in 2
and wind up with a mini plug and a mounted red LED.
Will light with a 1-1/2V battery. Assembly is 8-1/2"
long. Unused.

R3052 $0.75 or 10 for $6.00

BULB HOLDER/REFLECTOR/STAND

Holds standard 15mm diameter bayonet base bayonet
bulbs. Steeply curved metal reflector is 90mm long by
67mm wide. Stand has 2 mounting holes. 6" long wire
attached to bulb socket.

R3056 $1.50

Electrical Components - Page 33

Surplus Shed – www.SurplusShed.com

BABCOCK 6VDC HC-RELAY, ENCLOSED

Model AP342095 6VDC enclosed relay. Probably made
to easily fit on a circuit board. 8 pins on the bottom.
Here are the numbers on one side of the relay: In
addition to the AP number above, there is "5A250VAC"
and "HC2-P-DC6V". On the other side: "MATSUSHI­TA"; "7A 1/6HP 125,250VAC"; "3A30VDC". Hope you
know what all this means! Unused.

R3058 $1.75

3-PIN COPPER-WOUND VARIABLE CHOKE

Brand new bulk stock: 9 uH chokes for your electronics
project needs. These units measure 40mm long x 16mm
in diameter, with white plastic spool-like construction,
top section copper wire winding, and black plastic base
with 3-pin connection/contacts. Has ferrite tuning
core. The top of the choke is labeled 433-510, and l 9.

R3068 $1.00 or 10 for $8.00

HH SCOTT DUAL POT TONE CONTROL

Manufactured by CentraLab for HH Scott to be used
in one of their audio amplifiers. CentraLab part #
BA1115-008. HH Scott part # 021-1125-060. 1" long
x 3/8" diameter shaft, dual connected turnpot base,
each pot has 4 connections. They are dual, 1 Meg.
linear pots with a tap and were used in the H.H. Scott
vacuum tube receivers for the base and treble tone

controls. Unused.

R3069 $2.50

WIRED RED LED DC INDICATOR

A great power or sequence indicator to add to your
projects, or for replacement of burned out indicator/s.
Standard 5/16" long x 1/4" diameter opaque red
LED soldered to two 60" leads connected to a 11/16"
wide x 3/4" high x 3/16" thick plastic 2-pin plug.
LED solder connection is covered by 1 1/2" black
insulation/shrink tubing. LED illuminates in the

3-9VDC range. Unused stock.

R3080 $0.25 or 10 for $2.00

Page 34 - Electrical Components

To Order, call toll free: 1-877-7SURPLUS

MAGNETIC REED SWITCH

Overall length is 60mm. These are hermetically sealed
switches that are activated by magnets. Normally off
and switches on with magnet. Use with any magnet or
our M2415 or M2416 magnets. Handles 1 amp, 50VDC
and 250VAC. Unused

R3115 $0.50 or 10 for $4.00

4 DIGIT 7 SEGMENT RED LED DISPLAY

Digits are 17mm high. 7 segments with + and - on the
first and 3rd digit. 2 volts current limited. 15 pins.
Right hand decimal. We did a search for data but
couldn't find any. The numbers on the back are 8642 C
and TSB7881. Unused One of our customers provided
the following specs:Seven-Segment Numeric LED
Display-Multiplexed. Mfg by Three-five Systems Inc.

Package Style = 1-Edge+Hol. Connection Type = Comm Cath. Color = Red.
Character Height = 18mm. Peak Wavelength = 660nm. lv Min.(cd) Luminous
Intensity = 1.6m. @l(F) (A) (Test Condition) = 10m. V(F) Max.(V) Forward
Voltage = 2.0. L(F) Max. (A) Forward Current = 20m

R3121 $1.50

NICKEL CADMIUM BATTERY 1.2 VOLTS 170 MILLAMPS #GP170K

Unused measuring 1" diameter x 3/16" thick. Marked as
"GP SILVA CHARGE 170K"

R3181 $0.25 or 10 for $2.00

Eyepieces/Sets

SMALL EYEPIECE LENS ASSY

Looks like 4 elements, coated and mounted in a outside threaded barrel

12.6mm diameter by 9.4mm long. Focal length about 10 mm. Short eye
relief but good field of view and sharp color corrected images. You'll
need to get creative to find a way to fasten this to a standard size
eyepiece holder.

L1620 $5.00

Eyepieces/Sets - Page 35

Surplus Shed – www.SurplusShed.com

EYEPIECE LENS SETS - ERFLE, 30MM FL

Here's the optics you need to build your own eyepieces. We include some
basic mounting instructions, or use your own ideas. Most of the achromats
are coated, and some of the DCX (double convex) or PCX (plano convex) are
also coated. Here's what you get: ERFLE: Two achromats and one
DCX or PCX

L1715 $9.50

PROFESSIONALLY MADE PLOSSL EYEPIECES - 12.5MM
FOCAL LENGTH

Standard 1-1/4" size plossl, 4 element coated eyepieces
with metal barrel, eyeguard, and threaded for filters.
52 degree field of view. 10mm eye relief. Well cor­rected, and a great value. Unused.New,lower price.
Was $28.50

L1721 $22.50

2X BARLOW LENS 1-1/4" ACHROMATIC

Pofessionally made barlow lens, achromatic and coated.
Metal barrel for standard 1-1/4" eyepieces. Doubles
the power of your eypieces. Includes front and rear
covers and eyepiece set screw. Unused.

L1731 $28.50

PROFESSIONALLY MADE PLOSSL EYEPIECES - 6.5MM
FOCAL LENGTH

Standard 1-1/4" size plossl, 4 element coated eyepieces
with metal barrel, eyeguard, and threaded for filters.
52 degree field of view. 6mm eye relief. Well correct­ed, and a great value. Unused.New,lower price.
Was $28.50

L1732 $22.50

PROFESSIONALLY MADE 10MM PLOSSL EYEPIECE

Standard 1-1/4" size plossl, 4 element coated eyepieces with metal barrel,
eyeguard, and threaded for filters. 51 degree field of view, and 8mm eye
relief. Well corrected, and a great value. Unused.New,lower price.
Was $28.50

L1795 $22.50

Page 36 - Eyepieces/Sets

To Order, call toll free: 1-877-7SURPLUS

4MM INEXPENSIVE 0.965 TELESCOPE EYEPIECE

Made to fit the 0.965 Japanese standard. 2 element
Huygenian eyepiece. Unused with plastic container.

L1796 $3.75

6MM INEXPENSIVE 0.965 TELESCOPE EYEPIECE

Made to fit the 0.965 Japanese standard. 2 element Huygenian eyepiece.
Unused with plastic container.

L1797 $3.75

8MM INEXPENSIVE 0.965 TELESCOPE EYEPIECE

Made to fit the 0.965 Japanese standard. 2 element Huygenian eyepiece.
Unused with plastic container.

L1798 $3.75

12.5MM INEXPENSIVE 0.965 TELESCOPE EYEPIECE

Made to fit the 0.965 Japanese standard. 2 element
Huygenian eyepiece. Unused with plastic container.

L1799 $3.75

20MM INEXPENSIVE 0.965" TELESCOPE EYEPIECE

Made to fit the 0.965 Japanese standard. 2 element
Huygenian eyepiece. Unused with plastic container.

L1800 $3.75

25MM INEXPENSIVE 0.965" TELESCOPE EYEPIECE

These are made to fit the 0.965 Japanese standard. We have several dif­ferent focal lengths. All are 2 element Huygenian eyepieces. Unused with
plastic container.

L1801 $3.75

Eyepieces/Sets - Page 37

Surplus Shed – www.SurplusShed.com

2", 80MM FL, PLOSSL EYEPIECE UPGRADED

4 element Plossl design. We used surplus optics to
build these. Some elements originally cost our govern­ment hundreds of dollars each. Fits standard 2" tele­scope focuser. 4 elements, all coated. Super eyepiece
for the price. Threaded for filters. UnusedFL 80mm,
FOV 35 degrees (Barrel Limited), ER 65mm, EA
35mmFocal Length (FL), Field of View in degrees

(FOV), Eye Relief (ER), Clear Exit Aperture (EA)

L1837A $47.50

10X WIDE FIELD MICROSCOPE EYEPIECES

Standard microscope eyepiece size. Coated optics.
Wide field. 10X. Unused in plastic container with
threaded cap.

L1861D $12.50

15X WIDE FIELD MICROSCOPE EYEPIECES

Standard microscope eyepiece size. Coated optics.
Wide field. 15X. Unused in plastic container with
threaded cap.

L1862D $12.50

10X HUYGENIAN MICROSCOPE EYEPIECE

Huygenian design is most widely used in microscopes.
Standard size. 10X. Unused, with plastic container.
Good quality especially for the price!!

L1863D $6.50

15X HUYGENIAN MICROSCOPE EYEPIECE

Huygenian design is most widely used in microscopes.
Standard size. 15X. Unused, with plastic container.
Good quality especially for the price!!

L1864D $6.50

Page 38 - Eyepieces/Sets

To Order, call toll free: 1-877-7SURPLUS

2", 38MM FL, ERFLE EYEPIECE UPGRADED

Our great 2" eyepiece is now even better. We added a
black anodized aluminum barrel that's threaded for fil­ters. 5 element erfle design. Now using new optics
made especially for us. Fits standard 2" telescope
focuser. Coated optics. 60 degree field of view, 16mm
eye relief, and 35mm clear exit aperture. Super eye­piece for the price. Unused.

L2008A $47.50

PROFESSIONAL 10MM KELLNER 1-1/4" EYEPIECE

Kellner eyepieces were the most popular eyepieces for
moderately wide field telescopic systems prior to the
advent of some of the newer (and more expensive)
designs. 3 element coated optics with field of view
approximately 40 degrees and eye relief about 7mm.
Fits standard 1-1/4" focusers. Metal barrel with
knurled finger grip, and threaded for filters (thread is

courser than that used for standard eyepiece filters, but ID is slightly larg­er. Put a little masking tape over the outside thread of your filter and it
will screw in nice and secure). 10mm focal length. Plastic container included.
Unused and a great value.

L2031 $17.50

PROFESSIONAL 15MM KELLNER 1-1/4" EYEPIECE

Kellner eyepieces were the most popular eyepieces for
moderately wide field telescopic systems prior to the
advent of some of the newer (and more expensive)
designs. 3 element coated optics with field of view
approximately 40 degrees and eye relief about 10mm.
Fits standard 1-1/4" focusers. Metal barrel with
knurled finger grip, and threaded for filters (thread is

courser than that used for standard eyepiece filters, but ID is slightly larg­er. Put a little masking tape over the outside thread of your filter and it
will screw in nice and secure). 15mm focal length. Plastic container included.
Unused and a great value.

L2032 $17.50

Eyepieces/Sets - Page 39

Surplus Shed – www.SurplusShed.com

PROFESSIONAL 25MM KELLNER 1-1/4" EYEPIECE

Kellner eyepieces were the most popular eyepieces for
moderately wide field telescopic systems prior to the
advent of some of the newer (and more expensive)
designs. 3 element coated optics with field of view
approximately 40 degrees and eye relief about 20mm.
Fits standard 1-1/4" focusers. Metal barrel with
knurled finger grip, and threaded for filters (thread is

courser than that used for standard eyepiece filters, but ID is slightly larg­er. Put a little masking tape over the outside thread of your filter and it
will screw in nice and secure). 25mm focal length. Plastic container includ­ed. Unused and a great value.

L2033 $17.50

7.5MM FL 1-1/4" EYEPIECE

Six element design for sharp image from edge to edge.
40 degree field of view. Eye relief is 10mm, and exit
aperture is 6.5mm. Coated optics and threaded for fil­ters. Unused.

L2062 $19.50

PROFESSIONALLY MADE PLOSSL EYEPIECES - 4MM FOCAL LENGTH

Standard 1-1/4" size plossl, 4 element coated eyepieces with metal barrel,
eyeguard, and threaded for filters. 52 degree field of view. 5mm eye
relief. Well corrected, and a great value. Unused.

L2063 $22.50

INEXPENSIVE .965 MIRROR STAR DIAGONAL

These are made to fit the 0.967 Japanese standard.
90 degree mirror diagonal. View the stars without neck
damage. Fits 0.965" telescope focusers and accepts

0.967" eyepieces. Includes end caps and thumbscrew
to secure your eyepiece. Unused.

L2070 $3.95

PROFESSIONALLY MADE 15MM PLOSSL EYEPIECE

Standard 1-1/4" size plossl, 4 element coated optics with metal barrel, eye­guard, and threaded for filters. 52 degree field of view, 15mm focal length
and 12mm eye relief. Well corrected, and a great value. Includes plastic
eyepiece container. Unused.

L2164 $28.50

Page 40 - Eyepieces/Sets

To Order, call toll free: 1-877-7SURPLUS

INEXPENSIVE 1-1/4" MIRROR STAR DIAGONAL

90 degree mirror diagonal. View the stars without neck
damage. Fits standard 1-1/4" telescope focusers and
accepts standard 1-1/4" eyepieces. Mirror appears to
be decent quality. Plastic tubing. Includes end caps
and thumbscrew to secure your eyepiece. Unused.

L2177 $9.75

2", 53MM FL, PLOSSL EYEPIECE UPGRADED

Our great 2" eyepiece is now even better. We added a
black anodized aluminum barrel that's threaded for fil­ters. 4 element Plossl design. We used new coated
optics to build these. Fits standard 2" telescope
focuser. Perfect eye relief for eyeglass wearers.
Super eyepiece for the price. UnusedFL 53mm, FOV 50
degrees (Barrel Limited), ER 60mm, EA 35mm Focal

Length (FL), Field of View in degrees (FOV), Eye Relief (ER), Clear Exit
Aperture (EA)

L2189A $47.50

16MM FL 1-1/4" 4 ELEMENT EYEPIECE

You'll get sharp color corrected images thru your tele­scope with this all air spaced 4 element design. Fits
standard 1-1/4" focusers. 16mm focal length with a
25mm eye relief. Perfect for eyeglass wearers. Exit
Aperture is 10mm. Coated optics. Unused.

L3024 $17.50

QUALITY 40MM .965 EYEPIECE

We've had lots of requests for quality long focal length
.965 size eyepiece to fit the smaller Japanese standard
telescope focusers. This is a well corrected 40mm
focal length 3 element eyepiece with multi-coated
optics. Great eye relief of 35mm is excellent for eye­glass wearers. Exit aperture is 13mm

L3025 $17.50

Eyepieces/Sets - Page 41

Surplus Shed – www.SurplusShed.com

2" BARLOW LENS, 2X

You've been asking for this for some time. Here's a
new 2X Barlow lens for 2" focusers. Coated achromatic
lens assembly with 2" barrel threaded for filters. Get
twice the use out of your 2" eyepieces.

L3203 $44.50

QUALITY 17MM .965" EYEPIECE

We've had lots of requests for quality .965" size eye­pieces to fit the smaller Japanese standard telescope
focusers. This is a well corrected 17mm focal length 4
element eyepiece with coated optics. Eye relief is 2mm
and exit aperture is 7mm. Sharp color corrected
images edge to edge.

L3317 $15.50

PROF MADE 20MM PLOSSL EYEPIECE, MULTI-COATED

Standard 1-1/4" size plossl, 4 element multi-coated
optics with metal barrel, eyeguard, threaded for fil­ters, and rubber finger grip. 52 degree field of view
and 20mm focal length. Professionally made, well cor­rected, and a great value. Includes screw down type
eyepiece container. Unused.

L3324 $23.50

PROF MADE 25MM PLOSSL EYEPIECE, MULTI-COATED

Standard 1-1/4" size plossl, 4 element multi-coated
optics with metal barrel, eyeguard, threaded for fil­ters, and rubber finger grip. 52 degree field of view,
25mm focal length and 20mm eye relief. Professionally
made, well corrected, and a great value. Includes screw
down type eyepiece container. Unused.

L3325 $23.50

10MM, 2" WF TELESCOPE EYEPIECE-GREAT FOR MARS

You've been waiting for these and they are finally
ready. This is a great eyepiece with a 60 degree plus
field of view. Provides sharp, flat edge to edge color
corrected images. 8 elements (6 air spaced and one
doublet). Nice 11mm eye relief and 14mm exit aper

­ture. Fits standard 2 inch focusers. Threaded for fil­ters. Coated optics. Mars is coming!!

L3394 $65.00

Page 42 - Eyepieces/Sets

To Order, call toll free: 1-877-7SURPLUS

6.5MM WIDE ANGLE 1-1/4" EYEPIECE

This is the best we've seen in a high power eyepiece.
Wide 65 degree field of view, 10 glass lens elements,
all coated. Clear exit aperture is 11mm and eye relief is
10mm. Sharp images. Barrel is threaded for filters.
Includes eyepiece container. Unused.

L3061 $32.50

1.25" 19.9MM WF KELLNER EYEPIECE

This eyepiece is a 3 element wide field Kellner design
with coated optics and has a threaded barrel which
accepts standard filters. Fits 1.25" telescope focusers.
The optics are new wide field binocular eyepieces that
we re-mounted for telescope use. Only have a limited
supply so act quickly if you'd like one of these in your
collection. Eye relief is 13mm and exit aperture is

17mm. Focal length is 19.9mm. Will give you great views.

L3148 $19.50

1.25" 23.3MM WF KELLNER EYEPIECE

This eyepiece is a 3 element wide field Kellner design
with coated optics and has a threaded barrel which
accepts standard filters. Fits 1.25" telescope focusers.
The optics are new wide field binocular eyepieces that
we remounted for telescope use. Only have a limited
supply so act quickly if you'd like one of these in your
collection. Eye relief is 13mm and exit aperture is

17mm. Focal length is 23.3mm. Will give you great views.

L3149 $19.50

BOYER-PARIS 20MM FL LENS ASSY

Made in Paris, France to fit many of the 16mm projec­tors. These are in unused condition. 20mm focal
length, f/1.5. Multi-element assembly. Coated optics.
Will make a great 20mm eyepiece if you want to get a
bit creative with the barrel. Nice, sharp, color cor­rected images from edge to edge when used with one
of our objectives. Barrel is 55mm long and 25mm diam

-

eter at the top, 30mm diameter at the bottom.

L3185 $7.50

Eyepieces/Sets - Page 43

Surplus Shed – www.SurplusShed.com

3X MICROSCOPE EYEPIECE BARLOW ATTACHMENT

Make any microscope eyepiece 3x as pow­erful! Just slip your eyepiece into the top
and look through for 3x as much power.
Fits standard microscopes and eyepieces.
Coated optics, unbeatable price! Will

work with our student microscope, stereo microscope,
and Leica Scifinder. Supplies are limited! The second
picture is of the attachment with one of our wide field
microscope eyepieces (keeps it wide field!).

L3518 $15.00

SET OF FOUR .965" TELESCOPE EYEPIECES 4MM, 6MM, 20MM,
25MM INCLUDED!

Here's a great starter set of 4 standard .965" eye­pieces! Made to fit the Japanese standard focusers
found on many of the department store scopes. They
are 2 element Huygenian eyepieces. Unused with plastic
containers. You get 4mm, 6mm, 20mm, and 25mm all at
a very low price!!

L3528 $15.00

SET OF THREE PLOSSL 1-1/4" EYEPIECES: 4MM,
10MM, 15MM

Standard 1-1/4" size plossl's, 4 element
multi-coated eyepieces with metal barrel,
eyeguard, and threaded for filters.
Around 50 degree field of view, 5-12mm
eye relief. Well corrected, and a great

value. Unused. Save $$ off the price of purchasing
them separately!

L3529 $59.99

Page 44 - Eyepieces/Sets

To Order, call toll free: 1-877-7SURPLUS

SET OF 2" TELESCOPE EYEPIECES, 10MM, 38MM, AND BARLOW!

Here's a set of our most popular 2" eyepieces and a 2"
barlow! Included are:2" BARLOW LENS, 2X You've
been asking for this for some time. Here's a new 2X
Barlow lens for 2" focusers. Coated achromatic lens
assembly with 2" barrel threaded for filters. Get twice
the use out of your 2" eyepieces.10MM, 2" WF TELE­SCOPE EYEPIECE-GREAT FOR MARS You've been

waiting for these and they are finally ready. This is a great eyepiece with a
60 degree plus field of view. Provides sharp, flat edge to edge color cor­rected images. 8 elements (6 air spaced and one doublet). Nice 11mm eye
relief and 14mm exit aperture. Fits standard 2 inch focusers. Threaded for
filters. Coated optics.2", 38MM FL, ERFLE EYEPIECE Our great 2" eyepiece
is now even better. We added a black anodized aluminum barrel that's
threaded for filters. 5 element erfle design. Now using new optics made
especially for us. Fits standard 2" telescope focuser. Coated optics. 60
degree field of view, 16mm eye relief, and 35mm clear exit aperture. Super
eyepiece for the price. Unused.

L3558 $129.50

PROF. MADE 30MM PLOSSL 1-1/4" EYEPIECE, MULTI-COATED

Standard 1-1/4" size plossl, 4 element multi-coated
optics with metal barrel, eyeguard, threaded for fil­ters, and rubber finger grip. 52 degree field of view
and 30mm focal length. Professionally made, well cor­rected, and a great value. Fits standard 1-1/4"
focusers. Includes screw down type eyepiece contain­er. Unused.

L3580 $23.50

PROFESSIONALLY MADE PLOSSL EYEPIECES - 40MM
FOCAL LENGTH

Standard 1-1/4" size plossl, 4 element coated eyepieces
with metal barrel, eyeguard, and threaded for filters.
43 degree field of view. 32mm eye relief. Also has rub­ber finger grip. Well corrected, and a great value. .
Includes screw down type eyepiece container Unused.

L3585 $28.50

Eyepieces/Sets - Page 45

Surplus Shed – www.SurplusShed.com

20X MICROSCOPE EYEPIECE

Standard 0.917" OD eyepiece fits most microscopes.
Has focal length of 12.5mm which is 20x power.
Unused in original box. Coated optics. These were
made for A. Jaegers Optics and have the ALJAE brand
on them. Jaegers catalog #2513 ($64.50 in the 1981
catalog).

L3996 $15.00

FILTERS FOR 1-1/4" EYEPIECES (RED)

Glass filters with standard thread to fit your 1-1/4"
eyepieces. Unused

M1500 $7.50

FILTERS FOR 1-1/4" EYEPIECES (BLUE)

Glass filters with standard thread to fit your 1-1/4" eyepieces. Unused

M1501 $7.50

FILTERS FOR 1-1/4" EYEPIECES (YELLOW)

Glass filters with standard thread to fit your 1-1/4"
eyepieces. Unused

M1502 $7.50

FILTERS FOR 1-1/4" EYEPIECES (MOON)

Glass filters with standard thread to fit your 1-1/4" eyepieces. Unused

M1503 $7.50

FILTERS FOR 1-1/4 EYEPIECES (SET OF 4)

Glass filters with standard thread to fit your 1-1/4" eyepieces. Unused

M1504 $25.00

Page 46 - Eyepieces/Sets

To Order, call toll free: 1-877-7SURPLUS

1-1/4" UNIVERSAL CAMERA ADAPTER

Fits standard 1-1/4" telescope eyepiece holders.
Composed of a T-adapter for prime focus photography
and an extension tube for eyepiece projection photog­raphy. A setscrew in the extension tube holds the eye­piece in place. Black anodized aluminum. Unused.

M1513 $14.50

PLASTIC EYEPIECE CONTAINER

Protect your 1-1/4" eyepieces. Container ID is 1-7/16"
and 2" deep with cover that is 1-1/4" deep. Unused.

M1528 $0.75

MOON FILTER FOR 1-1/4" NON STD THREAD EYEPIECES

This fits our Professional Kellner eyepiece series as
well as our inexpensive Huygenian 1-1/4" telescope eye­pieces. Unused.

M2053 $6.50

MOON FILTER FOR .965

This fits our inexpensive 0.965" Japanese standard tel­escope eyepieces. Unused.

M2061 $3.50

THREADED BARREL FOR 1-1/4" EYEPIECES

If you are building your own eyepieces and want a pro­fessional barrel threaded for filters, this is what you
need. Black anodized aluminum, threaded for standard
telescope filters. Fits 1-1/4" focusers. 1-1/8" long and
threaded all the way thru. Unused.

M2104 $4.00

Eyepieces/Sets - Page 47

Surplus Shed – www.SurplusShed.com

2" X 2.5" THREADED EYEPIECE BARREL

If you're building your own 2" eyepieces, this black
anodized aluminum barrel is exactly what you need.
These are brand new and are 2" diameter x 2.5" long
and threaded all the way through. Accepts 48mm filters.

M3022 $8.00

2" X 2" THREADED EYEPIECE BARREL

If you're building your own 2" eyepieces, this black
anodized aluminum barrel is exactly what you need.
These are brand new and are 2" diameter x 2" long and
threaded all the way through. Accepts 48mm filters.

M3023 $7.50

Fiber Optics

FIBER OPTIC FACE PLATE, 35MM DIA X 6MM THICK

This is an optical device bundling lots of glass optical
fibers. It transfers the light and image with high effi­ciency and low distortion. They are used in CRT's, camera
tubes, CCD coupling, and image intensifiers. They replace
optical lenses in a number of applications and there is no
focal point to consider. These are great to experiment
with as you can see the image of newsprint follow the

curve of the face plate. If you have light reflected from the flat side, you'll
see a bulls eye that varies in diameter as you change plate's orientation. These
are polished, in great condition, and have serial numbers on the edge. Flat on
one side and concave on the other. 35mm diameter by 6mm thick.

L3172 $5.00

FIBER OPTIC FACE PLATE, 35MM DIA X 11MM THICK

This is an optical device bundling lots of glass optical
fibers. It transfers the light and image with high effi­ciency and low distortion. They are used in CRT's, camera
tubes, CCD coupling, and image intensifiers. They replace
optical lenses in a number of applications and there is no
focal point to consider. These are great to experiment
with as you can see the image of newsprint follow the

curve of the face plate. If you have light reflected from the flat side, you'll
see a bulls eye that varies in diameter as you change plate's orientation. These
are polished, in great condition, and have serial numbers on the edge. Flat on
one side and concave on the other. 35mm diameter by 11mm thick.

L3173 $7.00

Page 48 - Fiber Optics

To Order, call toll free: 1-877-7SURPLUS

FIBER OPTIC BUNDLE

This is great for special effects or to simulate a star
field. Illuminate with a flashlight or other light source.
Use filters over your light for different effects. Has
hundreds of different length strands with polished
ends to give a point of light at the end. Opens to about
12" diameter and is 3" high. For a super display, get a
12" square mirror and put a hole in the center to

accommodate the bundle. Put your light source under the mirror. See our
second photo for the result.

M2014P $12.00

B&L FLEXIBLE FIBER OPTIC LIGHT GUIDE, 6" LONG

Made by Bausch & Lomb, Catalog #32-13-06. Nominal
fiber diameter is 1/8". Ends are .21" diameter. Non­coherent light guide is precision-drawn 20-micron
fibers of 1.62 index glass, each coated with a protec­tive and internally reflective clad of 1.52 index; then
bundled and sheathed with aluminum strip-wound cable.
Incident light gathering efficiency is 60% at the

receiving end. Light transmitting efficiency is 5% absorbance per foot.
Range from visible to near infra red. Working temperature range -40
degrees F to +160 degrees F. In original containers.

M2021 $8.00

SHORT FLEXIBLE FIBER OPTIC LIGHT GUIDE

Short flexible fiber optic light guide. 2-3/4" long by

2.2mm thick. Metal tip ends are 2.8mm diameter.

M2042 $5.00 or 10 for $38.00

SMALL FIBER OPTIC SPRAY

Has about 75 different fiber optic strands, the longest
is 8 inches. Each strand has a polished end which gives
a point of light when the bottom is illuminated with a
flashlight or other light source. Great for experiment

-

ing with and demonstrating fiber optic properties.

M2044 $1.50

Fiber Optics - Page 49

Surplus Shed – www.SurplusShed.com

B&L FLEXIBLE FIBER OPTIC LIGHT GUIDE, 36" LENGTH

Manufactured by Bausch & Lomb, Catalog #32-01-36.
This non-coherent (light transmitting, non image-carry­ing) light guide contains precision-drawn 20-micron
fibers of 1.62 index glass, each coated with a protec­tive and internally reflective clad of 1.52 index; then
bundled and Polyvinyl Chloride-sheathed. Nominal fiber
diameter is 1/16"; sheathing outside diameter of 1/8";

minimum bend radius of 1/2". Ends are 1/8" diameter. Incident light gath­ering efficiency is 60% at the receiving end. Light transmitting efficiency is
5% absorbance loss per foot. Transmittance capability ranges from visible
to near infra red. Working temperature range -40 degrees F to +160
degrees F. In original container.

M2192 $10.50

B&L FLEXIBLE FIBER OPTIC LIGHT GUIDE, 60" LENGTH

Manufactured by Bausch & Lomb, Catalog #32-02-60.
This non-coherent (light transmitting, non image-carry­ing) light guide contains precision-drawn 20-micron
fibers of 1.62 index glass, each coated with a protec­tive and internally reflective clad of 1.52 index; then
bundled and Polyvinyl Chloride-sheathed. Nominal fiber
diameter is 3/32"; sheathing outside diameter of

5/32"; minimum bend radius of 3/4". Ends are 4mm in diameter. Incident
light gathering efficiency is 60% at the receiving end. Light transmitting
efficiency is 5% absorbance loss per foot. Transmittance capability ranges
from visible to near infra red. Working temperature range -40 degrees F to
+160 degrees F. In original container.

M2201 $15.00

MERET OPTICAL 4 CH VIDEO AND AUDIO FIBER OPTIC XMTR

Made by Meret Optical Communications Model
CRM1005UL. Takes standard 115VAC, 60Hz. Includes
power supply and 4 channel video to fiber optic amplifi­er/transmitter removable module and 4 channel audio
to fiber optic amplifier/transmitter removable module.
Excellent condition.

R3040 $35.00

Filters

2-1/2" YELLOW FILTER

Light yellow Type III made by Bell & Howell for the U.S. Army.
In size 8 mount.

M1179 $3.00

Page 50 - Filters

To Order, call toll free: 1-877-7SURPLUS

GREEN MILITARY RECTANGULAR FILTER

Made to be used with the M1923 military aiming device.
Green filter, 35mm long by 23.8mm wide, by 2.2mm
thick. One end has rounded corners.

M1417 $0.50 or 50 for $10.00

66MM YELLOW B&H FILTER

Mounted yellow Aero 2 filter manufactured by Bell & Howell. Clear filter
diameter is 66.4mm. Mount is 76mm diameter with 71.5mm diameter out­side thread protruding. Unused.

M1422 $2.50

NEUTRAL DENSITY GLASS FILTER

30mm diameter by 2.3mm thick. Comes in individual pouch. Unused.

M1464 $0.75

4-1/4" CLEAR FILTER/WINDOW

Clear optical glass, 4-1/4" diameter by 1/4" thick. Perfect for the front of
your large camera or telescope to protect the objective.

M1471 $3.00 or 2 for $5.00

4-3/4" DIAMETER YELLOW GLASS FILTER

This looks like a more current production type filter.
4-3/4" diameter by 0.15" thick. Yellow. Not mounted.
Unused.

M1559 $3.00

41MM YELLOW B&H FILTER

Mounted yellow Aero 2 filter manufactured by Bell &
Howell. Clear filter diameter is 43.3mm. Mount is

51.6mm diameter with 44.4mm diameter outside thread
protruding. Unused.

M1562 $1.75 or 10 for $14.00

Filters - Page 51

Surplus Shed – www.SurplusShed.com

MTD 30MM THREADED YELLOW FILTER

Glass yellow filter with 30mm clear diameter. Mounting
is 38mm diameter with 36mm diameter threads. Has
threaded retaining ring to hold the filter in place.

M1603 $1.75

50MM DIA SHADE 5 DARK FILTER

These were made to be cut for eyeglasses for some fil­ter application. Dark optical glass polished on both
sides. Master box indicates "shade 5". 50mm diame­ter by 3mm thick. Might make a nice moon filter for 2"
eyepieces.One of our customers advises that these
"are replacement inserts for brazing (or welding) gog­gles. They are used behind clear glass protective (and

replaceable) covers of the same diameter." Thanks Jerry

M2067 $0.50 or 10 for $4.00

RECTANGULAR GOLD CTD FILTER/BEAMSPLITTER

4.25" X 2" X 0.06" thick. Master box is marked
"GOLD/CR". Not sure what the original application was
but it acts almost like a beamsplitter. One side
reflects about 75% while transmitting about 25%. The
other side transmits about the same but with very lit­tle reflection.. Looks like a fun piece to experiment
with.One of our customers was able to do an analysis of

its composition. Here's his findings: "180 Angstroms of gold deposited
over 30 angstroms of chromium on glass containing tin oxide"

M2068 $0.75 or 10 for $5.50

ND WINDOW, 4.3" X 2" X .3" THICK

Neutral density window. Optical glass, marked on the
side ND320. Not sure what the 320 refers to.
Appears to be medium density. Has arrow on side
pointing to one surface. Made by Perkin Elmer for
some precision specialty application.

M2083 $5.25

Page 52 - Filters

To Order, call toll free: 1-877-7SURPLUS

RECTANGULAR INTERFERENCE FILTER/BEAMSPLITTER

2" X 7/8" X 0.05" thick. Not sure what the original
application was but it acts like a beamsplitter reflecting
about 75% and transmitting about 25%. Look thru it
and you'll see a blue tone, look at a reflection and it
appears to have a gold coating. Clearly will be a fun
piece to experiment with.

M2085 $0.50 or 10 for $3.50

N-3 NEUTRAL DENSITY FILTER, 63MM DIA

Glass neutral density filter, 63mm diameter by 6.3mm
thick. Box is marked N-3 density.

M2108 $1.25 or 10 for $10.00

MTD GLASS FILTER SET; RED, ND & AMBER

Filters are 30mm diameter, and mounting is 39mm dia.
Looks like they snap in place as there is a ring on the
back side that sticks out 4mm and is 33mm diameter.
Too big to be used in your 1-1/4" telescope eyepieces
but maybe you can get creative. The Neutral Density
one is quite dark and may make a decent moon filter.
We believe these were made for a military application.

M2140 $5.00

50MM X 50MM GREEN INTERFERENCE FILTER

This filter is reflective on both sides and shows a
deep green color when held up to a light. It loses it's
mirrored effect when looking at a light source. 50mm
long x 50mm wide x 1mm thick. We have a limited
supply of these.

M2147 $2.50

MOUNTED MOON FILTER FOR 2" EYEPIECES

Dark glass neutral density filter, mounted, ready to
screw right into your 2" eyepiece. 9mm thick. Reduce
the brightness and improve contrast to see the craters
and details of the moon's surface without eyestrain.
New/Unused.

M2618 $14.95

Filters - Page 53

Surplus Shed – www.SurplusShed.com

55MM X 50MM ORANGE INTERFERENCE FILTER

This filter is reflective on both sides and shows a deep
orange color when held up to a light. It loses it's mir­rored effect when looking at a light source. 55mm long
x 50mm wide x 1mm thick. Haven't got many of these.

M3019 $2.50

KODACHROME SERIES VI HAZE FILTER

Unused haze filter made by Eastman Kodak is 40mm
outside diameter and clear lens diameter is 37mm. In
original package.

M3024 $3.00

GREEN FILTER

Optical glass in threaded mount, 37mm diameter. Unused.

M5002 $3.00 or 10 for $20.00

50MM YELLOW FILTER

Made by Bell & Howell for the 75mmf/2.3 Baltar lens. Eq K1 (yellow).
Outside thread on ring is 51mm on one side, and inside thread is 50mm on
the other side.

M9007 $2.00

AERIAL CAMERA FILTERS-5-1/2" DIA. (YELLOW)

Mounted filters designed to snap onto the large aerial camera lenses. These
were made with the high quality optical glass that is difficult to find these
days. 5-1/2" clear filter diameter. Mounting diameter is 6-7/16"

M9011 $10.00

Flats

50.5MM DIA OPTICAL FLAT, 1/4 WAVE, DUAL SURFACE

Brand new, current production , optical glass flats with
1/4 wave accuracy on both sides! Either face can be
used for test applications. 50.5mm diameter by 15mm
thick.

L3163D $48.50

Page 54 - Flats

To Order, call toll free: 1-877-7SURPLUS

PERKIN ELMER 1/20TH WAVE COATED ELLIPTICAL FLAT WINDOW

Beautiful small-sized (19mm long x 13mm wide x 3mm
deep) precision-made elliptical flats from Perkin Elmer,
numbered 677 6108 002. Each window is 1/20th wave
on both sides, measures 17mm long x 13mm wide, is
offset 2mm, and is anti-reflective coated. Ground
edges. New in original sewn packets.

L3201 $15.00

LARGE MTD MILITARY INSTRUMENT MIRROR, 1/10 WAVE

Optical instrument mirror, 13.25 inches long by 9.4
inches wide. Mounted with 2 inch long rods protruding
from each side. One side has a ball bearing wheel, 2
inches diameter. Flatness is at least 1/10th wave in the
center 3/4 of the mirror. The ones we have left appear
to be not as flat towards the edges. Not sure why, but
they are a metal material and thinner at the edges.

Could be that temperature changes effect the edges more. Coating is in
very good condition. The texture you see in the photo is a reflection of our
ceiling. Limited supply. We don't find large mirrors of this quality very
often. Sorry, but we are not allowed to ship these outside the United
States.

L3410 $225.00

Glass Blanks

70MM DIA SCHOTT CROWN GLASS MOULDED BLANK

Quality crown glass made by Schott. These are unused
blanks designed to be ground & polished into eyeglasses
anywhere from + or - 6 diopters. 70mm diameter by
4mm thick. Meniscus shape. Great for experimenting
with your grind and polish expertise, or if you are in
the ophthalmology business, you need these and we've
got a good supply.

L2130 $0.50 or 10 for $4.00

65MM DIA SCHOTT GREEN WELD 2.0 GLASS MOULDED BLANK

Quality glass made by Schott, green weld 2.0. These
are unused blanks designed to be ground & polished into
eyeglasses for welders anywhere from + or - 6
diopters. 65mm diameter by 4mm thick. Meniscus
shape. Great for experimenting with your grind and
polish expertise, or if you are in the ophthalmology
business, you need these and we've got a good supply.

L2154 $0.50 or 10 for $4.00

Glass Blanks - Page 55

Surplus Shed – www.SurplusShed.com

THICK 2-7/16" DIAMETER LENS/MIRROR BLANK

Optical glass but has a few bubbles so
was probably meant to be used for con­denser lenses, but should also be excel­lent to grind and polish for a mirror.
These have a convex side and a flat side.

2-7/16" diameter by 1-1/8" thick at the center and 7/8"
thick at the edge. You can see through it and it will
make a nice paper weight or attach your favorite photo,
drawing, comic, etc. on the bottom for a magnified view.
Almost 7 ounces of glass.

L3141 $3.50

THICK LENS/MIRROR BLANK, 1-7/8" DIA.

Optical glass but has a few bubbles, so was probably meant to be used for
condenser lenses, but should also be excellent to grind and polish a lens or
small mirror. These have a convex side and a flat side and the diameter is
1-7/8" x 1-1/4" thick. You can see through it and it will make a good paper
weight at the very least (weighs 4.6 oz.).

L3179 $2.00

1.8" FLINT BLANK, SSK4

If you are trying your hand at making achromats , neg­ative lenses, or flats with high dispersion glass, here's
another heavy flint blank. 1.8" diameter by 0.6" thick.
Type SSK4 made by Schott, this glass has an index of

1.61764 and an abbe v number of 55.1. Glass number is

618551.

L3219 $1.50 or 10 for $12.00

44MM DIA HIGH INDEX PCV LENS BLANK

Glass is marked 850413 indicating an index of refrac­tion 1.850 and abbe v# of 41.3. Diameter is 44mm by
5mm thick plano concave blank. Curved surface meas­ures -2.75 diopters. Buy a few and save!

L3577 $0.75 or 10 for $5.00

Page 56 - Glass Blanks

To Order, call toll free: 1-877-7SURPLUS

Instruments

STUDENT SPECTROMETER

Unused and a real beauty. Heavy duty high quality
rugged metal construction throughout. Consists of a
telescope with eyepiece and 21mm clear diameter
achromatic focusing objective lens, and a collimator
with removable adjustable slit and achromatic focusing
21mm clear diameter objective. The 7-1/2"diameter
graduated circle has lines for each degree and is

numbered at every 10 degrees. Telescope and collimator are each 8"
long. Center table is designed to hold either a prism or grating. Vernier
control and scale for precision measurement. Telescope and table rotate
about a vertical axis. Spectrometers are used to measure and/or observe
spectrum, absorption bands, angles of refraction and reflection, etc.
The slit and collimator produce a parallel beam of light which then falls
on your prism or grating. The resulting spectrum is then observed through
the telescope.

I1430D $125.00

HIGH PRECISION 5MM RIGHT ANGLE PRISM

Manufacturer’s part # 01 PRB 003, original price:
$91.00. Made of BK7 glass, hypotenuse is 6.8mm long,
uncoated. The faces are 5mm square. Surface
flatness is 1/8th wave at 632.8 nm over 90% of edge
dimension. Clear aperture is 4.5mm, angle tolerance
is +/- 3 arc minutes. Surface quality is 20-10 scratch
and dig. Unused.

PM1050 $8.25

PREC 50MM SQUARE FUSED SILICA 1/20TH WAVE
FLAT/MIRROR

Manufacturer's part#02 MLQ 007,
original unit price: $290.00. 10mm thick,
wavelength is 400-800nm. Clear aperture
of 45mm, surface quality is 60-40
scratch and dig, parallelism is 3 arc

minutes. Non-aluminized. Polished on the top to 1/20th
wave and ground (but not polished) on the bottom.

PM1055 $37.50

Instruments - Page 57

Surplus Shed – www.SurplusShed.com

OIL ANALYZER-UNUSED GRAPHITE FURNACE ATOMIC ABSORP­TION SPECTROMETER

An absolute beauty!! Made by Perkin Elmer for the mili­tary to measure concentrations of wear metals in air­craft lubricating oil. It is a complete system with built
in microprocessor, display and printer. Considered
portable, it consists of two units in separate cases with
interconnecting cables and a third very strong shipping
case that holds everything. The analyzer can simulta-

neously measure (in parts per million) the concentrations of nine metals.
The instrument is easy to operate. Simply introduce a small sample of your
oil, water or fluid you want to analyze into the graphite tube in the furnace
using the supplied injector probe and press the start button. After the
automatic analysis cycle (about 1.5 minutes) is completed, the unit prints out
onto paper tape the metal concentrations.The optics in this thing are
impressive. There are two hollow cathode lamps (HCL) that provide the
spectral line sources for the metal analysis for iron, silver, aluminum,
chromium, copper, magnesium, nickel, silicon, and titanium. The transfer
optics consists of mirrors that combine the spectral output light beams of
the two HCLs into a single light beam. The light beam is transmitted thru
the graphite furnace tube (the furnace reaches temperatures up to 3000
degrees C and actually vaporizes the metals in the sample) and onto the
entrance slit of the polychromator. The spectral light is focused onto a dif­fraction grating and the nine spectral lines unique to the metals are sepa­rated and positioned on the focal plane. At each focal plane position is an
exit slit and the secondary optics measures each light output.In addition to
the complete instrument, you get 20 extra graphite tubes, 6 calibration
standards, other supplies, a tool kit, and Operation & Maintenance instruc­tions with illustrated parts breakdown. Unused and in mint condition.
Original cost was $70,156.36 each!! Our price is less than 2% of what our
government originally paid for them. Looks like they bought more than they
needed. Sorry, but we are not allowed to ship these outside of the
United States

I1434 $1,250.00

TRIPLE BEAM BALANCE

A single pan, low form balance that has three beams
with centre indicating sliding weights giving total weigh­ing capacity of 610g. Supplementary weights are
included to extend the capacity to 2610g. Spring
loaded zero adjust compensator and magnetic damping
are provided. Stainless steel pan is of 150mm diame­ter. Beams: 0-500g x 100g; 0-100g x 10g; and 0-10g x

0.1g. Unused.

I1435D $85.00

Page 58 - Instruments

To Order, call toll free: 1-877-7SURPLUS

INTERMEDIATE SPECTROMETER

This instrument is designed for high per­formance student use. It has a cast alu­minum alloy main structure. The collima­tor tube is mounted on the fixed pillar
and telescope tube on the moveable part.
Both the collimator and telescope have

175mm focal length, 32mm clear aperture object glass at
their one ends. The collimator has a precision slit 6mm
high and telescope has Ramsden eye-piece 15X at their
other ends. Both collimator and telescope have rack and
pinion focusing and means for leveling their axes and
squaring them to the axis of rotation.The scale is 127mm
diameter with a protective shield that is fixed to the
telescope movement and the prism table is attached to
the double ended vernier which reads to 1 minute arc.
Both telescope and table can be rotated independently
by hand about the same vertical axis. These can be
clamped at the desired positions and adjusted precisely
with the help of fine adjustment screws. Prism table is
marked with lines to assist placing the prism with
respect to the table leveling screws and has screwed
holes for fixing prism and grating holders. Prism holder
can accommodate prisms up to 38mm high. Supplied with
prism holder, grating holder, magnifier glass, tommy bar
for adjustment of optical axis and dense flint glass
prism, equilateral 32x32mm. In wood case. New/Unused

I1476D $325.00

HANDHELD DIRECT VISION SPECTROSCOPE

A real beauty! Great for demonstrating spectra from
any visible light source. Precision made heavy duty
stainless steel construction with an Amici type 3-ele­ment prism assembly, variable optical slit and
adjustable eyepiece. Easy to use: Optical slit adjusts
by rotating the knurled end piece, and focus is slip
type. Contrast and resolution of the spectrum is

changed by adjusting the slit opening. Both emission and absorption spectra
can be viewed. 4 inches long by 1 inch diameter on the slit end. New with
wood case. Edmund has a similar spectroscope for $272.00

I1479D $49.00

Instruments - Page 59

Surplus Shed – www.SurplusShed.com

GILFORD STASAR III SPECTROPHOTOMETER SET

Gilford (A Corning Laboratory Sciences
Company) Stasar III Spectrophotometer.
A highly accurate reference spectropho­tometer operating in the visible portions
of the spectrum from 335 nm to 700nm.
Linear measurements of absorbance or

concentration are displayed on a bright, easy-to-read
LED readout. Consists of a tungsten light source, dif­fraction grating monochromator (wavelength accuracy
+or- 2nm, and stray less than 0.3% throughout the wave­length range), linear absorbance photometer, and a four­place LED readout. Provisions are included for printers,
auxiliary analog equipment, and computer inputs for
remote control of sample and purge. This is the com­plete set in a large military transit case including air
pump, vacuum receiver, spare parts, cuvettes, operators
manual, service manual, and dual calibration standard.
Includes certificate of calibration. Appears to be
unused. Sorry, but we are not allowed to ship these out­side the United States. Only have a few.

I1480 $675.00

WOLLENSAK HANDHELD DIRECT VISION SPECTROSCOPE WITH
WAVELENGTH SCALE

This is a beauty! Portable and precise, the instrument
provides direct wavelength readings of visible spectrum
from 400nm to 750nm with each scale division repre­senting 5nm. The spectrum is viewed in the plane of
scale and for error free readings, the D-line (wave­length of sodium light) on the scale can be
adjusted.Great for demonstrating spectra from any

visible light source. Precision made heavy duty stainless steel construction
with an Amici type 3-element prism assembly with angle dispersion C-F 5
degrees, variable optical slit and adjustable eyepiece. Easy to use: Optical
slit adjusts by rotating the knurled end piece, and focus for both the scope
and wavelength scale is slip type. Contrast and resolution of the spectrum is
changed by adjusting the slit opening. Both emission and absorption spectra
can be viewed. Compact 4-1/4" inches long by 1 inch diameter on the slit end
and 1-3/4" wide on the eyepiece end. We have seen similar ones selling for
$350.00 online. Lots of uses including gem studies. New with wood case.
Wollensak quality optics since 1899.

L3524 $92.50

Page 60 - Instruments

To Order, call toll free: 1-877-7SURPLUS

Integrated Circuits

74LS27 INTEGRATED CIRCUIT

14 pin Triple 3-input NOR gate. The 74LS series of bipolar digital integrat­ed circuits have been the workhorse of digital circuits for more than two
decades. Unused.

R1451 $0.19 or 10 for $1.70

74LS74 INTEGRATED CIRCUIT

14 pin Dual D-type flop-flop w/preset and clear. The 74LS series of bipolar
digital integrated circuits have been the workhorse of digital circuits for
more than two decades. Unused.

R1453 $0.19 or 10 for $1.70

Kits

VARIABLE RATE STROBE KIT

Includes P.C. board, components, flash tube, and
instructions for building this solid state variable rate
strobe kit. Flash rate 60 to 120 per minute. Unit can
operate with standard "C" batteries (not included) on
12VDC or 6VDC depending on how you decide to wire it.
Constructed on a PC board 4-1/4" x 2-7/8" with 4 holes
for mounting in your enclosure. Full instructions includ-

ed for easy assembly.

K1001 $8.50

BIPOLAR 12VDC STEPPING MOTOR AND DRIVER KIT

Kit contains all necessary components including stepping
motor to construct this versatile solid state unit. Ideal
for the beginner or robotics enthusiast to obtain the
necessary theory and stepping motor operation tech­niques. Kit features operation from 12 VDC +-5%, bat­tery or power supply capable of 1 Amp or better (power
source not included), on-board controls and switches

for 1/2 step, full step, single step, CW, CCW rotation, speed control, run
and hold. Unit uses a 4 leaded bipolar motor. Also contained are LEDs which
show phase sequencing. Driver unit is constructed on a PC board (size 4" x
3"). Complete with all components, motor and detailed instructions.

K1003 $19.95

Integrated Circuits - Page 61

Surplus Shed – www.SurplusShed.com

12VDC MOTOR SPEED CONTROLLER AND DIMMER KIT

Easy to build solid state kit allows you to control the
speed and direction of 6-12vdc motors (one included) or
control the intensity of 6-12v incandescent lamps.
Designed to operate off a 12VDC battery source (not
included). Includes p.c. board (3" x 2-3/8") with 4
holes for mounting in your enclosure, all components,
motor, and instructions.

K1002 $15.00

Lenses

OPTICAL COMBINER

Coated, multi element optical combiner assembly. No idea what it was
designed to be used in, but this looks like an eyepiece with approx. 1" focal
length. Attached to it is a square viewer that sees thru the "eyepiece".
There is a lever that moves the lens as if focusing. It is labeled -2 thru 0
to +2. The label indicates that this Optical Combiner assy is "part of
NV/HUD system" Original government cost $2108.84 each. Unit measur­ers 2-1/2" X 2-1/2" X 1-3/4". Unused with rubber lens caps. Rare.

L1329 $95.00

TINY RECTANGULAR NEGATIVE LENS

Glass plano concave lens measures 10.8mm X 8mm. -65mm focal length.

L1373 $0.50 or 40 for $10.00

51MM DIA. PCX LENS WITH TRAPEZOID GRID

Plano convex lens, 51mm diameter by 175mm focal
length. Has trapezoid grid across most of the lens.
Unusual! Like new.

L1542 $4.50

5-3/4" DIA 800MM FL PCX W/CTR HOLE

Unused beauty. Made for some kind of government telescope. Coated plano
convex lens, 5-3/4" diameter by 800mm focal length with a 1-3/4" center
hole. 1/4" thick. Part of an objective assembly, but no clue what the com­pleted scope looked like. Says "Lens Objective" on the package.

L1758 $18.00

5-3/5" DIA. NEGATIVE LENS W/1/2" CTR HOLE

Negative meniscus lens . 5-3/8" diameter by 3/4" edge thickness. Focal
length of -800mm.

L1823 $15.00

Page 62 - Lenses

To Order, call toll free: 1-877-7SURPLUS

5-7/16" DIA DCX, 525MM FL W/CTR HOLE

Unused double convex lens, 5-7/16" diameter by
525mm focal length with 1-1/4" center hole.

L1898 $12.00

5-7/16" DIA NEG MENISCUS, -900MM FL W/CTR HOLE

Unused negative meniscus lens, 5-7/16" diameter by -900mm focal length
with 2-1/2" center hole.

L1899 $12.00

100MM DIA DCX LENS, 200MM FL

Double convex lens, 100mm diameter by 200mm focal
length. Unused and boxed.

L2006D $3.50 or 5 for $15.00

16MM DIA CTD TRIPLET, 50MM FL

Coated triplet lens, 16mm diameter by 50mm focal
length. 12mm thick.

L2050 $7.00 or 10 for $56.00

DCX ACRYLIC LENS 14MM DIA X 48MM FL

14mm diameter double convex lens with 48mm focal length made of optical
acrylic.

L2082 $0.50 or 10 for $3.50

17MM F/1.4 PROJECTION LENS

Kalart Automar projection lens. 17mm focal length,
f/1.4. 3 elements, coated. 1-1/8" long. Threaded bar

­rel is 7/8" diameter. Front flange is 1-1/4" diameter.
Unused.

L2088 $6.00

Lenses - Page 63

Surplus Shed – www.SurplusShed.com

KALART 2" F/1.6 PROJECTION LENS

Kalart Automar projection lens. 50mm focal length,
f/1.6. Coated optics. 2-5/8" long. Threaded barrel is
1-1/8" diameter. Front diameter is 1-1/2". With a lit­tle creativity, this could make a nice 50mm eyepiece.
Gives sharp wide field images when used with a copy
lens or one of our objectives. Unused with front and
rear lens caps.

L3057 $7.00

PCV LENS WITH FISHEYE EFFECT

Coated plano concave lens, 44mm diameter by -38mm
focal length. Edge thickness is 12mm. Gives a great
wide fisheye type view. Like new.

L3069 $4.00

POSITIVE MENISCUS LENS 65MM X 56MM X 114MM FL

Unused, coated positive meniscus lens 65mm diameter
but truncated top and bottom to 56mm. Focal length
is 114mm.

L3077 $4.00

ILEX .62X OPTICAL LENS ASSEMBLY

Beautiful lens assembly with coated optics. We think
these were designed to be used with optical compara­tors or photo typesetting machines. If you've got one
then this is a great bargain. If not, take it apart for
the optics. Has a 3 mounting hole flange and is 4" long
with a 1" diameter barrel.

L3084 $1.75

KOWA COPY LENS 5.4" FL (137MM), F/4.5

Beautifully coated copy lens made by in Japan by Kowa
for use in fax machines. Multi-element. The Kowa part
number is 76133. The assembly is 55mm diameter and
50mm long with a clear lens diameter of 37mm. The
focal length is 137mm.

L3132 $5.00

Page 64 - Lenses

To Order, call toll free: 1-877-7SURPLUS

NEGATIVE ASPHERIC LENS, 16.5MM DIA X -2000MM FL

Glass aspheric lens, 16.5mm diameter by -2000mm
focal length. Our guess is that this was made as a
special correction lens for some optical device. Only
have a few.

L3137 $3.50

ILEX 1.5X OPTICAL LENS ASSY

Beautiful lens assembly with coated optics. Made by
Ilex Optical Co for Compugraphic. Compugraphic part
#56641. We think these were designed to be used
with optical comparators or photo typesetting
machines. If you've got one then this is a great
bargain. If not, take it apart for the optics. Has
a 3 mounting hole flange and is 3.5" long with a 1"

diameter barrel.

L3139 $2.00

ILEX 1.75X OPTICAL LENS ASSY

Beautiful lens assembly with coated optics. Made by
Ilex Optical Co for Compugraphic. Compugraphic part
#56642. We think these were designed to be used
with optical comparators or photo typesetting
machines. If you've got one then this is a great
bargain. If not, take it apart for the optics. Has
a 3 mounting hole flange and is 2 5/8" long with a 1"

diameter barrel.

L3140 $2.25

KOWA 0.875X OPTICAL LENS ASSY

Beautiful lens assembly with coated optics made in
Japan by Kowa for Compugraphic. Compugraphic part
#56636. We think these were designed to be used
with optical comparators or photo typesetting
machines. If you've got one then this is a great
bargain. If not, take it apart for the optics. Has
a 3 mounting hole flange and is 5 1/4" long with a 1"

diameter barrel.

L3143 $1.75

Lenses - Page 65

Surplus Shed – www.SurplusShed.com

KOWA 1.125X OPTICAL LENS ASSY

Beautiful lens assembly with coated
optics made in Japan by Kowa for
Compugraphic. Compugraphic part
#46638. We think these were designed
to be used with optical comparators or

photo typesetting machines. If you've got one then this
is a great bargain. If not, take it apart for the optics.
Has a 3 mounting hole flange and is 5" long with a 1"
diameter barrel.

L3144 $2.00

ILEX 2.0X OPTICAL LENS ASSY

Beautiful lens assembly with coated optics. Made by
Ilex Optical Co for Compugraphic. We think these
were designed to be used with optical comparators or
photo typesetting machines. If you've got one then
this is a great bargain. If not, take it apart for the
optics. Has a 3 mounting hole flange and is 2.25" long
with a 1" diameter barrel. Unused.

L3156 $2.50

ILEX 5.25X OPTICAL LENS ASSY

Beautiful lens assembly with coated optics. Made by
Ilex Optical Co for Compugraphic. We think these
were designed to be used with optical comparators or
photo typesetting machines. If you've got one then
this is a great bargain. If not, take it apart for the
optics. Has a 3 mounting hole flange and is 1.75" long
with a 1" diameter barrel. Unused

L3160 $2.50

POSITIVE MENISCUS LENS, 42.4MM DIA. X 4000MM
FOCAL LENGTH

You've been asking for long focal length lenses. This one is 4000mm!
Unused, coated positive meniscus lens with a diameter of 42.4mm.

L3177 $4.00 or 10 for $30.00

Page 66 - Lenses

To Order, call toll free: 1-877-7SURPLUS

23X LENS ASSEMBLY - MICROFICHE PROJECTION?

We think these were made for microfiche projection,
but not certain. Beautiful brand new lens assembly in
the original packaging! Barrel is 34mm long x 28mm OD
with groove about 20mm from the front. Clearly made
to go into some instrument and be held in place using
the groove. Front element is 14mm diameter and back
element is 10mm. Multi-element, with coated optics.

Marked "Mag. 23X" Gloss black-enameled aluminum barrel. Makes a nice
color corrected magnifier, but has a narrow field of view.

L3204 $4.00

D.O. INDUSTRIES 50MM F/4.5 ENLARGER LENS

Unused in original box with front and back lens caps.
Iris operates with click stops from f/4.5 TO f/22.
50mm focal length. We've found them selling used for
up to $40.

L3221 $10.00

MTD NEGATIVE AIR SPACED DOUBLET, 15MM DIA X -667MM FL

Coated air spaced doublet, in a threaded mount. Clear
front lens diameter is 15mm, clear back lens is 10mm.
Mount is 25mm diameter by 17mm long. Focal length is

-667mm. Unused

L3254 $5.75

CYLINDRICAL LENS, PCX - 4" LONG X 1/8" WIDE X 3MM FL

Cylindrical lenses (also called astigmatic lenses) have at
least one surface that is formed like a portion of a
cylinder. They are used in rangefinders to produce
astigmatism, or the stretching of a point of light into a
line. Plano-convex cylindrical lenses have a positive
focal length, which makes them ideal for collecting and
focusing light for many imaging applications. These

cylindrical lenses measure 4" long x 1/8" wide x 1/16" deep, with polished
concave top and flat base surfaces, and ground ends. The edges along the
length may have some slight roughness due to their thinness. Focal length is
3mm. A great find for the optics hobbyist or experimenter!

L3289 $4.00 or 5 for $15.00

Lenses - Page 67

Surplus Shed – www.SurplusShed.com

4-1/8" DIA NEC TV PROJECTION LENS

Unused beauty. NEC TV projection lens. Designed for
use in big screen TV projection systems. Front clear
lens diameter of 4-1/8", rear clear lens diameter of 3
7/8", barrel length of 6 1/4" x 5 1/8" diameter (front)
and 4 5/8" diameter (rear), multi-element (appears to
be all glass as the lens assembly weighs 5 pounds), with
coated optics. Black plastic barrel with 5/8" wide

notched front grip ring and 5 1/8" diameter x 3/4" wide barrel-center
threaded mount. The lens projects a large image in a short distance. Great
for education projects such as slide or transparency projector, etc in addi­tion to TV projection. Designed to be nearly in contact with subject sur­face. The number 542 is stamped on the barrel and may be the NEC model
number. We haven't taken one apart, but it looks like different types of
large diameter optical elements. Includes black plastic front and rear lens covers.

L3294 $15.00

COBURN SUPREMACY 71MM DIAM. SEMI-FINISHED
HARD RESIN LENSES

Military surplus plastic lens blanks, manufactured by
Coburn Optical Industries, Inc. of Muskogee OK. Made
from CR39 resin, these Accommodator model concave
lenses are impact-resistant (not shatterproof or
unbreakable), are 71mm diameter and feature a 22mm
diameter low-segment slight magnification zone (shown
in the listing picture). Ground 8mm thick edge; approx-

imately 15mm depth. Unused stock, in the original wrapping and boxes.
Price is for a set of 2.

L3309 $4.50

B&L STEREO RHOMBOID ARM

Made by Bausch & Lomb for their Model 240 Aerial Photo
Interpretation Zoom Stereoscope. Catalog #53-70-28.
Our understanding is that the instrument has two of these
arms and optional stereo lenses that fit on the end (we
have some). It's quite an interesting piece with lots of
optics in it. If you look straight thru the top section, you
get a clear upside down image. The top section rotates,

and the image rotates as well. If you turn it 180 degrees, the image becomes
right side up and correct left to right. There is also a control that moves one
of the lens assemblies and appears to zoom the image a little. Inside is a Right
Angle Prism with 1 inch square faces. Also an elliptical front surface mirror,
16mm x 22mm, two cemented doublets, and 5 single element lenses. Clearly an
expensive piece. If you have the Model 240 instrument, then you need two of
these as spares. If not, then what a great optical piece to experiment with.

L3313 $22.50

Page 68 - Lenses

To Order, call toll free: 1-877-7SURPLUS

1X STEREO LENS FITS L3313 RHOMBOID ARM

Bausch & Lomb CAT. NO.53-70-30. Made to fit the
B&L 53-70-28 Stereo Rhomboid Arm. Inside is an
elliptical front surface aluminized mirror, major axis is
34mm and minor access is 24mm. 5.5mm thick. Mirror
material is optical glass, Index of 1.517 and Abbe V#

64.5. Openings are 25mm. Top has bayonet type mount.
3 screws hold the diagonal onto the assembly, so it can

easily be removed for other applications. Of course, if you have one of the
B&L Model 240 Aerial Photo Interpretation Zoom Stereoscopes, then you
definitely need these.

L3314 $10.00

2X STEREO LENS FITS L3313 RHOMBOID ARM

Bausch & Lomb CAT. NO.53-70-31. Made to fit the B&L
53-70-28 Stereo Rhomboid Arm. Inside is a coated
cemented doublet lens with a focal length of 52.4mm,
and an elliptical front surface aluminized mirror, major
axis is 34mm and minor access is 24mm. 5.5mm thick.
Mirror material is optical glass, Index of 1.517 and
Abbe V# 64.5. Top has bayonet type mount with a

25mm opening. Of course, if you have one of the B&L Model 240 Aerial
Photo Interpretation Zoom Stereoscopes, then you definitely need these.

L3315 $12.00

0.43X STEREO LENS FITS L3313 RHOMBOID ARM

Bausch & Lomb CAT. NO.53-70-29.
Made to fit the B&L 53-70-28 Stereo
Rhomboid Arm. Inside is a coated
cemented doublet lens with a focal length
of 620.4mm, a coated double concave

lens with a focal length of -55mm, and an elliptical front
surface aluminized mirror, major axis is 34mm and minor
access is 24mm. 4.5mm thick. Mirror material is optical
glass, Index of 1.517 and Abbe V# 64.5. Top has
bayonet type mount with a 25mm opening. Of course,
if you have one of the B&L Model 240 Aerial Photo
Interpretation Zoom Stereoscopes, then you definitely
need these.

L3316 $15.00

Lenses - Page 69

Surplus Shed – www.SurplusShed.com

EXPERIMENTERS MULTI-ELEMENT LENS ASSEMBLY

We don't have a clue what this was originally designed
for, but you can use it as is as an objective lens, or take
it apart to get six different lens elements, positive and
negative between 30 and 40mm diameter. As is, the
focal length is about 9 inches and gives a nice clear,
sharp color corrected image with an eyepiece. One of
the lens elements has what appears to be a strong

dichroic coating reflecting red on the coated side. There is a lever that
when turned moves a group of lenses up and down the barrel, but it doesn't
appear to effect the focal length. Barrel is 55mm diameter by 60mm long.
Clearly a quality piece. If you can figure out what it was made for, you
might be able to re-sell them at a profit. Unused.

L3338 $7.50

FUJI MIRRORED COPIER LENS 187MM FL, EYE/FACE INSPECTION?

Unused with front and rear covers. Front element has
a 55mm clear diameter. Mirrored lens easily unscrews
from the back. It's a 40mm diameter negative lens
with the rear center 20mm aluminized. The focal
length is perfect for viewing your eye, nose, teeth, etc.
Assembly is 77mm diameter by 45mm long with a
flange 90mm diameter.

L3342 $5.50

MTD 25MM FUJINON COPY LENS, 170MM FL

Quality coated multi-element optics made by Fujinon,
Model CP. Clear front and rear lens elements are
25mm diameter. Plastic housing is 100mm long by
24mm wide. Has two mounting holes. This would be
great for a small compact finderscope as the images
with an eyepiece are sharp and color corrected. Also
makes a great 2X wide field magnifier with a sharp,

flat color corrected image edge to edge and nice working distance of about
120mm with a 120mm diameter view. Focal length is 170mm. Unused.

L3344 $4.50 or 10 for $35.00

MTD,CTD LENS ASSY, 20MM FL, 42X

Multi-element, coated lens assembly made in Japan.
Not sure what it was made for. Barrel is 35mm long by
21mm diameter. Focal length is 20mm. Marked "20MM
42X JAPAN". Does not work well as an eyepiece. Field
of view is very narrow for that purpose. Does well as a
sharp color corrected magnifier but not a wide field.

L3349 $3.25

Page 70 - Lenses

To Order, call toll free: 1-877-7SURPLUS

4.5" DIA CONDENSER LENS, 6.5" FL

Crown glass condenser lens. Plano convex. 4.5 inches
diameter by 6.5 inches focal length. Unused.
Made in France.

L3381 $6.00

MTD B&L METROGON LENS, 6" FL

Metrogon lenses are a 4 element design with very
strong curved meniscus lens elements covering around a
90 degree field. They are used in aerial cameras for
very large format film for the preparation of topo­graphic maps and for large format projection sys­tems.The 6 inch focal length lens covers at least a 9" x
9" format at f/6.3. We know this lens has a 6 inch

focal length, but we do not know what the f number is and we don't have
the equipment to accurately determine the f ratio or the actual maximum
format for this lens. Our understanding is that as the center aperture is
made smaller (larger f number), the coverage format becomes larger. We
haven't yet taken one apart, so don't know if it will be easy or hard to
change the center stop. We did some testing and it looks like this one gives
about an 8" x 8" format as is. There is a small screw on top of the assembly
that loosens it and the barrel slides out. It's a compact 2" long by 2-1/16"
diameter.Metrogon lenses are the most extreme type of symmetrical con­struction. Each side of the lens has two elements which provides correction
for color and spherical faults. We are told that the lenses are also com­pletely free of distortion. Made by Bausch & Lomb. Coated optics. Great
condition. Front and rear elements are 45mm diameter. Focal length is
152mm. Barrel is 60mm diameter by 50mm long. Mounting 140mm long
by 85mm wide with 4 mounting holes. We don't find these very often
these days.

L3392 $28.50

GLASS ASPHERIC LENS, 50MM DIA X 30MM FL

Very strong aspheric curve on one side and plano on
the other. Diameter is 50mm and focal length from
the plano side is 30mm. Aspherics offer superior
aberration correction for light concentration that
would normally require several spherical elements.
Unused beauties.

L3467 $5.00

Lenses - Page 71

Surplus Shed – www.SurplusShed.com

MADDOX ROD LENS, 13MM DIA

Used in vision tests, the Maddox rod lens has a number
of molded glass grooves (cylinders) through which a
spot of light appears as a streak perpendicular to the
cylinders axis. Our understanding is that they are used
to uncover latent squints (phorias). When a distant
spot of light is viewed with the Maddox lens in front of
one eye, a line will be seen by the eye covered with

lens, while a spot of light is seen with the other eye. The line will be at
right angles to the grooves. When the grooves are horizontal, the line will
appear vertical. Someone with normal vision will see the line pass through
the spot of light, but someone with latent squint will see the light source to
one side of the line. 13mm diameter by 3mm thick. Unused.

L3476 $2.50

SET OF 6 IR PYRO FRESNEL LENSES

These were made to be used with the Pyroelectric
infrared sensors in security devices such as burglar
alarms. These lens arrays were made by Fresnel
Technologies, Inc. We don't have a clue about focal
length or which devices these were made to fit. You
get a set of 6, at least 4 have totally different charac­teristics such as focal length, beam configuration, etc.

We have no way of testing them. Each of the 6 lenses is made up of multi­ple fresnel arrays.

L3480 $12.00

3" DIAMETER PCX CONDENSER LENS, 4" FOCAL LENGTH MINT!

Unused plano convex lenses in mint condition in the
original "made in Japan" packaging. Appears to be
Crown glass. Edge thickness is 2mm, center thickness is
15mm. Uncoated. We have a nice quantity of these if
you want to incorporate them into your project!

L3561 $5.00 or 10 for $40.00

PRECISION FUJI 13MM SQUARE PCV CYLINDRICAL LENS ­17MM FL

This was made by the Fuji Photo Optical Company in
Japan. Cylinder lenses are used to transform a point of
light into a line image. We believe this was used on a
camera as some sort of adapter. Fuji part number

05090. Precision coated optics, -17mm focal length.
New/Unused!

L3587 $6.50

Page 72 - Lenses

To Order, call toll free: 1-877-7SURPLUS

A. JAEGERS 58MM DIA X 85MM FL PCX ASPHERIC LENS

These are unused plano convex aspheric lenses from
the remains of A. Jaegers optics in Lynbrook, NY.
Edge thickness is 2mm, center thickness is 15mm.
Aspherics offer superior aberration correction for
light concentration that would normally require several
spherical elements. Unused beauties.

L3600 $5.00

NAVITAR 111MM FL, F/5.5 PROJECTION LENS

Here's a great vintage lens made by Navitar. Front
clear lens diameter is 28mm (barrel is 43mm), rear
clear lens diameter is 28mm (barrel is 41mm). Center
stop is about 10mm. Focal length is 111mm. The barrel
is 37mm long. Great purple anti-reflective optics!

L3604 $9.00

FRESNEL LENS 13" FOCAL LENGTH, 12-1/2" LONG X 9-7/8" WIDE

You have been asking for these for quite some time and
our last batch sold out rapidly. Quality optical acrylic
fresnel lens 1/16" thick, 318mm x 250mm with a
330mm focal length constructed of thousands of tiny
spiral microgrooves. These are commonly used in DIY
projectors in conjunction with an achromatic lens.
Fresnels were originally designed to be used in light-

house because of their light weight. Also could be used to build a solar fur­nace. And makes a great magnifier for TV, computer screen, reading, etc..
Unused in mint condition! While supplies last!

L3606 $9.95 or 10 for $80.00

A. JAEGERS BI-CONVEX 75MM DIAMETER X 200MM FL

This is Jaegers catalog # 4042. Plate glass, edge thick­ness is 3.5mm, center thickness is 8mm. Uncoated. May
have very minor edge chips or light scratches. Great
for experiments or as a magnifier.

L3608 $3.00 or 10 for $24.50

Lenses - Page 73

Surplus Shed – www.SurplusShed.com

Magnifiers

DOUBLET 10X FOLDING MAGNIFIER

We had these before and sold out. Pocket folding mag­nifier. Double lens to give flat field and minimum chro­matic aberration. Lens diameter is 16mm. Plastic
mount. Only 35mm by 25mm by 15mm thick when fold­ed. Magnification 10X. Unused.

L1842D $1.25 or 5 for $5.00

JEWELER'S/WATCHMAKER'S EYELOUPE

Glass lens mounted in light weight black plastic eye cup
cell. 4X magnification with working distance of 2".
Lens diameter is 1". Watchmakers and jewelers hold
the cell in their eye socket by squinting slightly.
Unused.

L1859D $1.25

4" DIAMETER MAGNIFIER

Glass magnifier, 4" diameter, mounted in nickel plated
frame and 4" long handle. Provides wide field viewing
with crisp, sharp images at all points. The lens is
recessed in its frame to prevent chips and scratches.
Unused.

L1860D $4.50

7X POCKET COMPARATOR

Focusing magnifier accepts standard
27mm reticles. Three element achromat­ic glass lens system. Eyelens clear
lens diameter is 21mm.Has acrylic
base to allow light on the object.

Includes linear scale, 20mm x 0.1mm. Other reticles
available. Has hundreds of applications including linear
measurements, angles, hole diameters, thread sizes, etc.
Unused with case.

L1873D $28.50

Page 74 - Magnifiers

To Order, call toll free: 1-877-7SURPLUS

FOLDING POUCH MAGNIFIER

Pocket type with 40mm diameter glass lens mounted in
a leather case that also serves as a handle. 3X magni­fication. Unused.

L1874D $1.25

4X FOLDING POCKET MAGNIFIER

Pocket type with 27mm clear diameter lens mounted in
a plastic case that also serves as a handle. 4X magnifi­cation. Unused.

L1895D $0.75

75MM DIAMETER MAGNIFIER

Glass magnifier, 75mm diameter, mounted in nickel
plated frame and 3-1/2" long handle. Provides wide
field viewing with crisp, sharp images at all points. The
lens is recessed in its frame to prevent chips and
scratches. Unused.

L2044D $3.25

50MM DIAMETER MAGNIFIER

Glass magnifier, 50mm diameter, mounted in nickel plated frame and 2-5/8"
long handle. Provides wide field viewing with crisp, sharp images at all
points. The lens is recessed in its frame to prevent chips and scratches.
Unused.

L2045D $2.50

12 POWER TRIPLET MAGNIFIER

Mounted 3 element magnifier. Coated optics. These
are like the lens assemblies used in several of the
Edmund magnifiers. Gives large, sharp flat field of
view and clear, achromatic image. Working distance is
1/2". Front element clear diameter is 14mm and rear
element clear diameter is 20mm. Barrel has outside
threads and is 25.3mm diameter by 24.1mm long. Focal

Length is 24mm. Unused

L2085 $12.00

Magnifiers - Page 75

Surplus Shed – www.SurplusShed.com

38MM DIAMETER MAGNIFIER

Glass magnifier, 38mm diameter, mounted in nickel
plated frame and 3-1/2" long handle. Provides wide
field viewing with crisp, sharp images at all points. The
lens is recessed in its frame to prevent chips and
scratches. Unused.

L2096D $0.95

10X COMPOUND LENS MAGNIFIER

Two element glass lens in black finish metal mount gives
flat field and 10x magnification. Clear lens diameter is
25mm. Field of view is 31mm and working distance is
25mm. Length is 122mm. High power and easy to use
hand held design. Excellent for critical viewing applica­tions including the inspection of optical components.
Unused.

L2101D $8.50

LINEN TESTER MAGNIFIER

Collapsible, single element precision glass DCX lens mounted in silver grey
finished metal mount. 6X magnification with 25mm x 25mm opening and mm
lines etched on the inner faces of the viewer's base. Unused

L2123D $8.00

QUALITY FOLDING MAGNIFIER

Thick lens system in metal mount. Single special thick
lens precision made to give good flat field and minimum
chromatic aberration. Clear lens diameter is 17mm.
Glass thick lens in metal cell with retaining rings Gives
10X magnification. Folded, only 30mm long by 20mm
wide. Unused, with case.

L2173D $6.75

MTD 22MM FL TRIPLET/11X MAGNIFIER, CTD

This makes a great color corrected flat field magnifier.
Three element, coated optics. Clear glass diameter is
10mm. Mounting is 15mm diameter by 12mm long. You
could make this into an inexpensive 22mm eyepiece
which will give a nice sharp flat field image. Used as a
magnifier, it is 11x. Carry one in your pocket, purse,
glove compartment, shirt pocket, jacket, etc. Unused.

Have a large quantity of these, so if you want to build this into your prod­uct, we can probably supply your needs.

L3275 $6.00 or 10 for $45.00

Page 76 - Magnifiers

To Order, call toll free: 1-877-7SURPLUS

4 PIECE MAGNIFIER SET

Set includes our: DOUBLET 10X FOLD­ING MAGNIFIER, 6x LINEN TESTER
MAGNIFIER, 10X COMPOUND LENS
MAGNIFIER, and 4" DIAMETER MAG­NIFIER. Buy as a set and save $$ off

the price of purchasing them separately. Everything you
need to start a magnificent collection! All new/unused.
Great Xmas gifts/stocking stuffers.

L3500D $19.50

27MM ANGLE RETICLE FOR POCKET COMPARATOR

High quality 27mm diameter glass reticle with great
stability. Patterns are made with low reflection hard
chrome deposition which imparts high contrast for easy
readability. Printing is on the side of the reticle which
makes contact with the object, thus minimizing the
error due to parallax.This one has angle scales 0
degrees to 80 degrees in 5 degree divisions and 80 to

90 degrees in 1 degree divisions. Radius scale 0.1 to 1mm in 0.1mm and 1­10mm in 0.5mm radii. Angle scale 29 degrees, 55 degrees, 60 degrees, and
118 degrees. Ten circles on left 0.1 to 1.0 in 0. 1mm divisions and ten circles
on right from 0.005" to 1/64" dia. Three linear scales: 1) 10-0-10mm with 0
to 1mm in 0.05 divisions, 1mm to 5mm in 0.1 divisions, 5mm to 10mm in

0.5mm divisions 2) 0 to 0.5" in 0.005" divisions and 3) 0 to 1/8" in 1/64"
divisions. Fits our L1873D 7X pocket Comparator. Unused.

M1538D $12.00

27MM GRAPH RETICLE FOR POCKET COMPARATOR

High quality 27mm diameter glass reticle with great
stability. Patterns are made with low reflection hard
chrome deposition which imparts high contrast for easy
readability. Printing is on the side of the reticle which
makes contact with the object, thus minimizing the
error due to parallax.Graph of 10mm x 10mm divided
into 0.5mm squares. Ten circles from 0.1mm to 1mm in

0.1mm increments and three circles of 1.5mm, 2mm and 2.5mm dia.
Horizontal scale 10mm in 0.1mm divisions. Fits our L1873D 7X pocket
Comparator. Unused.

M1539D $12.00

Magnifiers - Page 77

Surplus Shed – www.SurplusShed.com

27MM PROTRACTOR RETICLE FOR POCKET COMPARATOR

High quality 27mm diameter glass reticle with great
stability. Patterns are made with low reflection hard
chrome deposition which imparts high contrast for easy
readability. Printing is on the side of the reticle which
makes contact with the object, thus minimizing the
error due to parallax. Protractor scale 0 degrees to
180 degrees numbered every 10 degrees., divided each

degree. Radius scales 0 to 10mm in 0.5mm divisions. Fits our L1873D 7X
pocket Comparator. Unused.

M1540D $12.00

27MM ANGLE/RADIUS/GRID RETICLE FOR POCKET COMPARATOR

High quality 27mm diameter glass reticle with great
stability. Patterns are made with low reflection hard
chrome deposition which imparts high contrast for easy
readability. Printing is on the side of the reticle which
makes contact with the object, thus minimizing the
error due to parallax.Angle scales 0 degrees to 90
degrees in 1 degree divisions. Radius scale 0.5 to 10mm

radii in increments of 0.5mm. Two circles 1.5mm and 3mm dia. Seven cir­cles from 0 to 0.7mm in steps of 0.1mm. Linear scale 20mm with 0.1mm
divisions. 0.3" X 0.4" grid in 0.025". Fits our L1873D 7X pocket
Comparator. Unused.

M1599D $12.00

Microscopes

SET OF 4 ACH MICROSCOPE OBJECTIVES

Standard JIS 36mm type in bright chrome finish. Unused, good quality,
great price. Set includes 4X/0.10, 10X/0.25, 40X/0.65, and 100X/1.25 oil.
40X & 100X are spring loaded.

L1866D $48.50

4 X ACHROMATIC MICROSCOPE OBJECTIVE

Standard JIS 36mm type in bright chrome finish.
Unused, good quality, great price. 4X/0.10

L1867D $7.50

Page 78 - Microscopes

To Order, call toll free: 1-877-7SURPLUS

10X ACHROMATIC MICROSCOPE OBJECTIVE

Standard JIS 36mm type in bright chrome finish.
Unused, good quality, great price. 10X/0.25

L1868D $9.00

40X ACHROMATIC MICROSCOPE OBJECTIVE

Standard JIS 36mm type in bright chrome finish.
Unused, good quality, great price. 40X/0.65. Spring
loaded.

L1869D $15.00

100X ACHROMATIC MICROSCOPE OBJECTIVE

Standard JIS 36mm type in bright chrome finish.
Unused, good quality, great price. 100X/1.25 oil.
Spring loaded.

L1870D $29.00

20X ACHROMATIC MICROSCOPE OBJECTIVE

Standard JIS 36mm type in bright chrome finish. 20X.
Unused, good quality, great price.

L2188D $11.00

MICROSCOPE COVER GLASS - SIZE 24 X 50MM

These are thickness #2 (0.17 - 0.25mm). 1/2 oz pack­age contains about 23 pieces. Two sizes available: 24
X 40mm and 24 X 50mm. The 24 X 50 may be antique
as the box is labeled "Made in Occupied Japan". Old,
but in original unopened containers.

M1151 $1.00

Microscopes - Page 79

Surplus Shed – www.SurplusShed.com

MICROSCOPE MECHANICAL STAGE

Unused beauty. Precision stage that easily clamps onto
your microscope. Horizontal movement 75mm and ver­tical movement 44mm, each by rack and pinion. Both
scales are graduated and read by verniers. Spring fin­ger to hold slides. Heavy duty.

M1527D $28.50

HAND MICROTOME

Design for slicing micro thin sections of a specimen for
viewing with your microscope. Sample to be sectioned
is supported in styropith or other material and placed
in the central well. Turning the milled knob at the base
of the microtome moves the piston up and raises the
sample. Sections can be cut from the top flat plate
stage with a razor. Piston has 19mm overall travel with

click stops at 20 micron intervals. Advances 500 microns for each complete
turn. Top stage is 63mm diameter and well is 21mm diameter. Unused.

M1571D $24.50

COMPOUND MICROSCOPE PHOTO ADAPTER

Here's what you need to take 35mm photos thru your
microscope. Quality aluminum construction. Fits stan­dard 25mm microscope tube tube (including our T1480
Student Microscope). Unit has 2 sections with bayonet
thread to easily come apart so you can insert your eye­piece. Other end has standard "T" thread to fit your
camera's T-Adapter (available at most camera stores if

you don't already have one for your camera). Unused.

M1573D $19.50

MICROSCOPE SUB STAGE ILLUMINATOR

Light alloy vented housing fitted with glass blue filter
on one side and clear diffuse filter on the other side.
Works off standard 110VAC, or if you are traveling,
remove the adapter and the unit will work with stan­dard Continental Europe 220VAC. Has in line on/off
switch. Fits standard microscopes (plugs into the mir

-

ror socket) such as our Student Microscope #T1480.

Unused.

M1574D $19.50

Page 80 - Microscopes

To Order, call toll free: 1-877-7SURPLUS

CORNING MICROSCOPE COVER GLASS, 35MM X 50MM

Corning optical glass No. 0211. Microscope cover glass
thickness #1 (0.13 - 0.16mm). 35mm X 50mm. Made of
the highest quality glass with high corrosion resistance.
Water white and free from lead oxide. Production con­trolled for flatness and thickness so the surfaces are
uniform and practically free from irregularities. In
plastic container with slip off cover. Packaged 1 oz. per

box (approximately 70 per box). Unused.

M1584 $3.00 or 10 for $22.00

15 WATT 230VAC T29 PYGMY BC BULB FOR
MICROSCOPE ILLUMINATOR

These are replacement bulbs for our M1574D,
Microscope Sub Stage Illuminator. Made by Phillips.
New.

M2177D $1.25

INEXPENSIVE MICROSCOPE ILLUMINATOR

Need a replacement illuminator for your microscope?
These are perfect. Runs off 2 AA batteries and has a
twist on/off knurled adjustment. These are actually
from the Leica microscope we sell, so if you need a
replacement you can save $$ instead of purchasing
them straight from Cambridge/Leica. We'll include a
spare bulb at no extra charge! Unused.

M2594 $8.00

WOODEN MICROSCOPE TRANSPORT/CARRYING CASE

This works well for a lot of Vintage (as well as new)
Stereo and Compound Microscopes. Measures 19-1/2"
x 9-7/8" x 11-3/4" deep. Heavy duty handle for easy
carrying. All cases come with fully functional locks and
keys. In addition, there is a slide out "drawer" inside
the case with 14 holders for objectives and eyepieces.
Weighs 12 pounds, in excellent original condition. A

steal at our low price!

M2661 $25.00

Microscopes - Page 81

Surplus Shed – www.SurplusShed.com

STEREO MICROSCOPE

Unused stereo microscope with a large working distance
and field of view. The whole microscope head can be
rotated 360 degrees and can be raised and lowered on
its vertical pillar. The interpupillary distance is
adjustable between 55mm and 75mm. The microscope
is focused by a rack and pinion mechanism. Comes with
built in paired 2X achromatic objectives and a matched

pair of 10X wide field eyepieces. Gives 20X magnification. Includes 3-1/4"
round reversible (white or black) stage Perfect for science experiments,
gem analysis, etc.

T1477D $95.00

STUDENT MICROSCOPE

Well constructed microscope with 3 objective turret
including 4X, 10X, & 40X objectives. Includes 10X &
15X eyepieces to give up to 600X. Metal stand tilts for
easy viewing. Has rack & pinion coarse and fine controls.
Dual mirror to reflect light. Has stage fitted with iris
diaphragm. Abbe condenser N.A. 1.25, and filter sup­port with rack & pinion movement. These provisions

allow the use of optional 100X oil immersion objective for up to 1500X.
Unused. Terrific microscope for the price.

T1480D $95.00

COMPLETE 98 PIECE 1200X METAL MICROSCOPE SET W/CASE

This kit is an incredible value! Model XSP-1XT comes
complete with instruction and learning guide. Needs (2)
AA batteries (not included). Recommended for ages 8
and up. Here's what you get:Die Cast Microscope;
Scalpel; Spatula; Tweezers; (4) Collecting Vials; Test
Tube with cap; Petri Dish; Pipette; (5) Prepared Slides;
(18) Blank Slides; (18) Slide Labels; (36) Slide Covers;

(2) Small Specimen Vials; Stirring Rod; Magnifying Glass; Measuring
Graduate; Spare Light Bulb; Viewing Head; Carrying Case; Camera Holder;
Crystallized Red Dye; Crystallized Blue Dye An amazing value!! New!!

T1526 $49.00

Mirrors

2-1/2" DIA SPHERICAL MIRROR-24" FL

Made for small reflecting telescopes. 2-1/2" diameter by 0.40" thick, 24"
focal length. May have some minor scratches that won't effect the image.
Great for kids scope or optical experiments.

L1565 $6.00

Page 82 - Mirrors

To Order, call toll free: 1-877-7SURPLUS

MTD HIGH QUALITY DIAGONAL

This is a beauty. Unused in original box. Not sure what
the original design was for as the label states "1x
stereo lens. CAT. NO.53-70-30. Clearly made for right
angle viewing for some instrument. Openings are 25mm.
Top has bayonet type mount. 3 screws hold the diagonal
onto the assembly, so it can easily be removed for
other applications.

L1768 $15.00

17MM BK7 FRONT SURFACE MIRROR

Quality front surface mirror, 17mm diameter by 2mm
thick. First surface is aluminized. Made of BK7 optical
glass. Looks like at least 1/4 wave accuracy. New.

L3129D $5.00

UNCOATED 2-1/2" F/10 SPHERICAL MIRROR

Plate glass. Polished but not aluminized. 24" focal
length. Uncoated mirrors are sometimes used in solar
projection scopes.

L3171 $2.50

PRECISION 50MM MIRROR MTD ON STAND

Perkin Elmer #L1165113 "TGS Flat
Mirror Assembly". Designed to be used in
a Perkin Elmer detector unit with lasers.
Mirror is 50mm diameter by 5mm thick
and appears to be at least 1/10 wave accu-

racy. It's mounted on a metal assembly with 4 mounting
screws. The top of the mirror sits 100mm from the bot­tom of the stand. The unit screws into a wood base
which is enclosed in a protective box. Installation instruc­tions are included. Unused. Only have a few.

L3184 $65.00

Mirrors - Page 83

Surplus Shed – www.SurplusShed.com

LASER POLYGON GOLD MIRROR/MOTOR ASSY

Made by Toshiba, Model LSM-205-8BK. Motor is
24VDC and revolves at 4749 RPM. 8 flat gold coated
mirrors revolve. Each rectangular mirror is 27mm long
by 5mm wide. These were made to be used in laser
scanner assemblies. Flange is 100mm diameter with 3
mounting holes. Unit is 50mm high. Unused.

L3361 $10.00

DCX EYE INSPECTION MIRROR!!

Looks like these were 25mm diameter double convex
lenses (4.5 diopter curve on each side) and aluminized
on one side. Reflections on one side all look small, but
on the other side, the focal length is perfect for
inspecting your eye. Not sure what it was designed for
but clever idea and great for fun and education.

L3477 $4.25

40MM DIA CONCAVE ALUMINUM MIRROR NEW/UNUSED

These are great unused polished aluminum mirrors that
were probably made to be used in conjunction with a
bulb for maximum light reflection. Focal length is very
short (roughly 35mm) and the dish is 6mm deep. These
are very similar to our L3262 which sold out very quick­ly! When put up close to your eye, you get a highly
magnified view. Buy a quantity and $ave!

L3588 $2.00 or 10 for $15.00

Miscellaneous

2" RUBBER EYEGUARD?

Made for the government and called "Eyeshield
Assembly'. Will fit over 2" eyepieces. Has a threaded
insert 1-3/4" ID by 2-1/4" OD that is removable.
However, the eye end opening is only 3/4" diameter.
You'll probably want to use an exacto knife or other
sharp blade to cut that end opening larger. The inter­esting thing about this is that there are rubber flaps

that will protect your eyepiece from dust etc. When you press the eye­guard against your eye, the flaps open, exposing your eyepiece. We have
been told that this is the eyeguard for the AN/TVS-2 series night vision
sights. The flaps are to keep the light from the image intensifier from
lighting up your face for the enemy to see with their night vision sight.
Unused

M1184 $4.00 or 10 for $30.00

Page 84 - Miscellaneous

To Order, call toll free: 1-877-7SURPLUS

GRAB BAG OF OPTICAL STUFF

Mix of lenses, mirrors, prisms, and/or strange optical things that we have
only small quantities of. No two grab bags are the same. You'll be pleased
or your money back, no questions asked.

L1477 $25.00

MILITARY WOOD CASE

Quality military wood case with metal hinges and han­dles. 15-1/4" X 14" X 8-1/2". Inside dimensions: 13­3/4" X 12-1/4" X 6".

M1474 $19.00

DELTALITE NIGHT LIGHT WITH OUTLET

Same as our #M1515, but also has an
electrical outlet in front so you don't
loose an outlet by installing the night
light.Great cool-glow illumination draws
only 2/100ths of a watt of electricity.

Costs about 2 cents a year to run. Useful life is over
100,000 hours. You'll never have to replace another
night light bulb. Leave plugged in all the time. Safe for
children as there is no glass or bulb that can break or
explode. Unit mounts flush to the wall. The DeltaLite
Electroluminescent material produces a cool flat lithe.
Great for bathrooms, bedrooms, etc., or bring one with
you to the hotel when on business or vacation. Unused.
UL approved. Price is for a package of 2.

M1516 $6.00 or 3 for $15.00

METAL YOKE

9" high by 4-3/4" Inside width. Center rod is 1-3/4"
long by 5/8" diameter. Heavy duty.

M1520 $4.50

Miscellaneous - Page 85

Surplus Shed – www.SurplusShed.com

BINOCULAR EYEPIECE COVER/FILTER HOLDER

An interesting device that fits over both
binocular eyepieces to protect them, and
has a compartment to hold two filters
35mm diameter. 4-5/8" by 2-3/16" inside
measurement. Made to fit specific

military binoculars, so you'll probably have to fasten
it on somehow. Our M1525 neck strap fits it nicely.
One of our customers advises that these are designed
for the Carl Zeiss 7x40 DF or EF NVA (National Volks
Army) Checkpoint Charlie binoculars. He has seen them
selling for $10+

M1524 $1.75

RUBBER OBJECTIVE/EYEPIECE COVER

Unused. 2-1/16" ID with 2" long handle. Brown. Made
to fit specific military binoculars (we don't know which
ones). Also fits nicely over some of the oversized eye­pieces such as the ones in our T1473 French observa­tion binoculars.

M1526 $0.75 or 10 for $5.00

BRASS WEIGHT SET

All weights are machined brass, accurately adjusted
and marked. Housed in a hinged wooden box. Set of 10
weights: 200g, 100g, 50g, two 20g, 10g, 5g, two 2g,
and 1g. Unused.

M1536D $13.50

SMALLER BRASS WEIGHT SET

All weights are brass, accurately adjusted and marked.
Housed in a hinged wooden box. Set includes: 100g,
50g, two 20g, 10g, 5g, two 2g, and fractional weights
from 1mg to 500mg. Forceps included. Unused.

M1537D $12.50

Page 86 - Miscellaneous

To Order, call toll free: 1-877-7SURPLUS

DIFFRACTION GRATING REPLICA, 15,000 LPI

Student's Grating, 15,000 LPI. 1-3/4" x
1-1/8" clear size mounted to 2-1/2" x 1­3/4". This is an optical component that
separates white light into its component
wavelengths. Perfect for use with our

I1430D Spectrometer. Unused with plastic case.

M1541D $15.00

2500 LPI DIFFRACTION GRATING REPLICA

Student's Grating, 2,500 Lines Per
Inch. 1-3/4" x 1-1/8" clear size mounted to 2-1/2" x
1-3/4". This is an optical component that separates
white light into its component wavelengths. Perfect
for use with our I1430D Spectrometer. Unused with
plastic case.

M1568D $15.00

7500 LPI DIFFRACTION GRATING REPLICA

Student's Grating, 7,500 Lines Per
Inch. 1-3/4" x 1-1/8" clear size mounted
to 2-1/2" x 1-3/4". This is an optical
component that separates white light
into its component wavelengths.

Perfect for use with our I1430D Spectrometer.
Unused with plastic case.

M1569D $15.00

ADJUSTABLE OPTICAL SLIT

Adjustable slit opens from 0 to approximately 3mm.
This is the same slit used in our #I1430D
Spectrometer. Barrel OD is 22mm. Unit is 50mm long.

m1570D $15.00

Miscellaneous - Page 87

Surplus Shed – www.SurplusShed.com

OUTSERTS EYELENS SET FOR MILITARY BIOLOGICAL/
CHEMICAL MASKS

These are unused replacement eyelens sets (2 to a
package) for the military ABC-M17 and M17A1 field
protective masks. If you have one of these gas masks,
then here's your chance to get a replacement outserts
eyelens set. Or, here's a start to building your own
mask, goggles, or whatever. Original cost was $16.94
per set. 3-3/4" wide by 3-1/2". Clear, scratch resist-

ant plastic material surrounded by rubber. Price is for a set of two.

M1600 $1.50

STAINLESS STEEL VERNIER CALIPER

Low cost stainless steel vernier caliper. Measures up to 5". Labeled in both
inches and centimeters. Unused, with case.

M1606D $7.95

CANON EOS T-MOUNT

This adapter allows your camera to accept the myriad of lenses and acces­sories (such as our camera adapter M1513) that conforms to the T-Mount
standard. Quality metal construction.

M1607D $13.50

PENTAX T-MOUNT

This adapter allows your camera to accept the myriad of lenses and acces­sories (such as our camera adapter M1513) that conforms to the T-Mount
standard. Quality metal construction. For Pentax K type Bayonet cameras.

M1608D $10.00

MINOLTA T-MOUNT

This adapter allows your camera to accept the myriad of lenses and acces­sories (such as our camera adapter M1513) that conforms to the T-Mount
standard. Quality metal construction.

M1609D $10.00

NIKON T-MOUNT

This adapter allows your camera to accept the myriad of lenses and acces­sories (such as our camera adapter M1513) that conforms to the T-Mount
standard. Quality metal construction.

M1610D $10.00

Page 88 - Miscellaneous

To Order, call toll free: 1-877-7SURPLUS

MICROMETER, 0 TO 25MM, 0.01MM GRADUATION

This is super for the price. Metal micrometer meas­ures from 0 to 25mm with 0.01mm graduations. Wood
case included. Unused.

M1611D $12.00

INEXPENSIVE METAL VERNIER CALIPER

Low cost vernier caliper. Measures up to 5". Labeled in
both inches and centimeters. Unused with case.

M1612D $3.00

43" LONG CAMERA STRAP

Here's your chance to get a back-up strap for your
camera. These were made to go with the Nimslo 3D
cameras. Unused.

M2008P $0.50 or 10 for $3.50

HANKSCRAFT COMPLETE MOTOR/GEAR
DISPLAY ASSY

Consists of a plastic housing with a DC
motor and some gears. Housing is 4-3/4"
x 3-5/8" x 1-7/8" deep. An arm is includ­ed that attaches to the gear and pro­trudes out each side of the unit. There

are holes to attach a display piece. Works off standard
"D" battery which fits into the assembly. Use this
device for a motion display or attach a small flag and
you've got a flag waiver. Or use it as an educational tool
to demonstrate how motors and gears can be used.
Unused.

M2018P $3.00

Miscellaneous - Page 89

Surplus Shed – www.SurplusShed.com

FLANDERS HEPA FILTER MODULE

Made to be used on clean room equipment. 17.625" X

17.625" X 5.5". Model #TH5217L17L007SU­F06A000000. Made by Flanders Filters, Inc. Specs:
Resistance is 0.52; Penetration is 0.000065%; Test flow
160 CFM. The term "HEPA filter" stands for "High
Efficiency Particulate Air filter". These filters are so
efficient in removing small particles that they will capture

the tiny particles contained in cigarette smoke. Like new. Only have a few.

M2052 $50.00

MEADE INTRO TO LX5 AUDIO CASSETTE

If you have a Meade LX5, here's the audio cassette
that gives you instructions on how to put it together
and use it. Lot's of the info is useful for any similar
scope. On the other side is some interesting basic
astronomy information. Quality noise reduction tape
that can be recorded over.

M2056 $1.00

THE AMATEUR SCIENTIST ON CD-ROM - LATEST EDITION

From the archives of Scientific American Magazine,
more than 72 years of experiments and projects from
all The Amateur Astronomer, The Amateur Telescope
Maker, and The Amateur Scientist columns from the
beginning in 1928 thru 2001. Every article is complete
with all photos, sketches, etc. More than 1,000 proj­ects in every major field of science.These are actual

construction articles rated by difficulty, cost, target age, and safety. Fully
searchable text, updated and corrected. Articles from such well known
people as Albert Ingalls and C.L. Strong, Jearl Walker, Shawn Carlson, and
others.This is the most complete resource ever assembled for science hob­byists, home schoolers, educators, science fair participants, researchers,
schools, colleges, clubs, organizations, etc. Covers the following areas of sci­ence: Astronomy, Archeology, Biology, Chemistry, Earth Science,
Mathematics and Physics. Includes extensive Technical Notes and Tools &
Techniques and tons of helpful science secrets that have never appeared in
Scientific American. Includes over 2,000 pages of helpful Technical Notes
that never appeared in the magazine covering topics from choosing binocu

­lars for astronomy to monitoring earthquakes, as well as the full text of
Procedures in Experimental Physics by John Strong, a classic and much
sought after reference on instrument making. In addition, there is a sample
software library with demos, shareware, freeware, and other items of use
to amateur scientists. Works with Windows, Mac, Unix & Linux. Requires 32
MB RAM and Netscape 4.0 or IE or higher. Publisher's price: $39.99

M2071 $24.00

Page 90 - Miscellaneous

To Order, call toll free: 1-877-7SURPLUS

SCREW TOP MICROSCOPE OBJECTIVE CONTAINERS

These are made for the standard size microscope
objectives. If you've got objectives lying around
unprotected, you need these. Unused

M2075 $0.50 or 10 for $4.00

ASTROSPEC 3000 UV EXTREME REPLACEMENT
LENSES-CLEAR

If you have the Astrospec 3000 safety
eyeglasses, then you need these replace­ment lenses, or you can just attach a rub­ber band thru the side slots. These have

UV protection, are anti-static, anti­scratch, and have a truly unique anti-fog coating that
offers unparalled fog resistance in extreme conditions.
These are unused government surplus.

M2080 $1.00 or 10 for $7.50

HEAVY DUTY HINGED ALUMINUM MILITARY CASE

Perfect for protecting your valuable astro or electron-

ics equipment. Has rigid foam dividers and padding, 4

clasps, and two handles. 18" long by 15" wide by 14"

high.

M2081 $29.00

ASTROSPEC 3000 UV EXTREME REPLACEMENT LENSES-GRAY

If you have the Astrospec 3000 safety eyeglasses,

then you need these replacement lenses, or you can

just attach a rubber band thru the side slots. These

have UV protection, are anti-static, anti-scratch, and

have a truly unique anti-fog coating that offers unpar-

alled fog resistance in extreme conditions. These are

unused government surplus.

M2084 $1.00 or 10 for $7.50

Miscellaneous - Page 91

Surplus Shed – www.SurplusShed.com

EYEPIECE CASE??

Will hold 4 of your 1-1/4" eyepieces or 12 of your .965

eyepieces. Will also hold two 2" eyepieces together

with one 1-1/4". Compact size: 8" long by 7" wide by 3-

1/2" high. Molded black plastic. Usable ID is 6-1/2" x

4-1/2" x 2" deep. .965" eyepieces can stand up but 1-

1/4" need to be horizontal. Has clasp for tight closing

and spot for easy holding. Lots of other uses. Has two
mounting holes on the bottom. Great for holding parts on your work bench.
Unused

M2116 $2.00

BRASS ZERO BACKLASH GEAR

Brass double gear with springs to provide zero back-

lash. Gear is 2-1/2" diameter with 1/4" center hole.

M2130 $4.00

BELDEN CORP 6 FOOT LONG AIR CONDITIONER
REPLACEMENT CORD

Belden replacement cord No. 17141-S, 15 Amps, 250

volt for your air conditioner-think summertime! 6 Ft.

#14-3. Type SPT-3. Unused in original packaging.

M2133 $1.75

JOHN E. HAND BRASS MARITIME DRAW MARKERS

At the start of all maritime voyages, a watch rotation

among the crew is established and a friction-free way

to accomplish this task was to lay these 12 markers

face down, shuffle them as you would dominoes and let

each crewman pull a marker. Quickly and fairly, the

watch rotation was set. Made in England and encased

in navy blue leather. Set of 12 markers are made of
polished brass.

M2184 $11.50

Page 92 - Miscellaneous

To Order, call toll free: 1-877-7SURPLUS

HARD WOOD LEGS FOR TABLE/TRIPOD/CHAIR, 23.5"

Made of hard wood (not sure what kind but they weigh

11oz. ea.), 23-1/2" long with 1/4" thread on the top and

1-1/2" brass furl on the bottom. Top diameter is 1-

1/4". Leg tapers to 3/4". Not sure what these were

originally made for, but you can get creative at our

prices, and we've got lots. Price is for a set of 4.

M2194 $7.50

CLEAR ACRYLIC PLATE - 3" X 5", 1/4" THICK

Precut standard-sized rectangular clear acrylic plates

for your experimenting, hobby, or optical use. Non-pol-

ished edges.

M2206 $0.50 or 10 for $4.00

PARAMOUNT PICTURES 3-D PROJECTION SYSTEM

A superb find for the vintage 3-D enthusiast!!! The

Paramount 3-D Projection system works with the flat

projection lens of movie theatre projectors to produce

a more panoramic and 3-D projected image (same width

with 20% decreased height) of movies made for 3-D.

Anamorphic lenses are not needed and should not be

used. The system mounts on the front of the projec­tion lens, and modifies the image via the internal multiple front surface mir­ror assembly. These 3-D conversion systems were apparently produced by
Paramount for movie theater usage during the Cinemascope era and we were
told they were used with Friday the 13th part 3 in 3-D and the Jaws 3-D
movie. This is the more modern system that uses polarization instead of
the two color system used back in the 50's. The system is contained in a
portable 24" wide x 12 1/4" high x 12" deep black textured vinyl-covered
wooden box with handle, dual latches, and reinforced corners. The foam­insulated interior contains the system components: lens holder, assembly
mounting plate, 2 assembly support rails, the projection unit with polarizer
set, aperture plates, two Allen wrenches, hardware bag with Allen bolts and
locking knobs, and system instruction manual. Aluminum construction.
Lightly used. Mirror assembly is in mint condition. This is an incredible buy
at our price as we understand they cost Paramount $1000.00 each. We think
you may be able to use your camera to photograph thru it(slides?)and then
attach it to your slide projector (we haven't tried that idea)or make a stereo
print for use in your old stereo viewer (we tried it with a digital camera and
it works great). How about make you own 3-D movies? We know you'll get
creative with this one. Get two? One for your camera and one for projection.

M2234 $75.00

Miscellaneous - Page 93

Surplus Shed – www.SurplusShed.com

BRASS-PLATED 2 1/2" LONG
RESIDENTIAL HINGES

Nice unused plain load bearing residential

hinges for use with light weight doors or

other non-concealed applications. Each

measures 2 1/2" long x 2 5/8" across

(opened flat), with rounded edges, remov­able 2 3/4" long 1/16" thick pin, and three beveled 1/4"
holes per half. Unused in the original packs (4 per pack).
No mounting hardware included.

M2263 $3.00

6" DIAMETER WHEEL WITH SOLID RUBBER TIRE

A good replacement wheel for lawn mowers, lawn carts,

go carts, wagons, trash containers, or for those unique

mobile projects (i.e. robotics). The wheel is 1 1/2"

wide, with a white plastic 5" diameter center with 3/8"

diameter axle hole, and 1/2" thick solid black rubber

tire with diamond-shaped tread. Buy a few and save!

M2280 $3.00 or 4 for $10.00

RECTANGULAR PLASTIC AM/FM RECEIVER
TUNING/DIAL PLATES: BACK-LIGHTABLE!

A nice replacement plate for home

stereo, some portable stereos, or for

your radio electronics project. Each

plate measures 7 5/8" long x 1 3/8" high

x 2mm thick and is triple-laminate, with
matte black top scale layer, middle opaque white layer,
and transparent light yellow-green base layer. As such,
backlighting the plate produces a soft yellow-green scale
and numerics. The FM scale is graduated from 88 to 108
MHz; the AM scale is graduated from 53 to 160 (corre­sponding to the 535-1605 kHz AM band), and the divid­ing zone between the scales is graduated from 0 to 100.
Each plate is unused and in excellent original condition!

M2281 $1.00

Page 94 - Miscellaneous

To Order, call toll free: 1-877-7SURPLUS

MILITARY BAR CODE READER SET - MSI/SYMBOL

Functional Army surplus bar code reader units in

reinforced and foam-insulated 2-part green plastic

transit cases. Each set was manufactured circa

1988, and includes the bar code reader (BCR:

manufactured by MSI Data Corporation, Model 1410-

PDT-LS), gun-style laser scanner with 24" coil cord

(Model LS-8100 manufactured by Symbol Technologies,
Inc.), black vinyl BCR case/holster, black vinyl laser scanner holster,
black BCR holster carry strap, black BCR holster belt, interface BCR
cable, BCR diagnostic plug, null modem interface cable, gender
changer/adapter, and a technical manual. RS232 interface connections.
The BCR is enclosed in a waterproof casing that measures 8.125" high x

4.125" wide x 2.375" deep, and weighs 40 oz. with batteries installed.
The laser scanner measures 7.15" high x 1.70" wide x 4.20" deep, and
weighs 8 oz. The BCR uses 10 AA alkaline or NiCad batteries for power,
and an Eveready CR2016 3 volt lithium coin cell battery (or equivalent)
for memory retention. The laser scanner is powered by the BCR. These
sets were used as part of the Army LOGMARS(T) automated marking and
reading symbols system, and carry a military application-specific CAM chip.
We checked and found that they scan, read and enter the bar code
numbers into the reader, and they pass the internal tests. Each set is in
excellent, virtually unused, condition! We did an internet search and found
some selling for around $1200.00! Only have a few. Batteries not included.
Includes ARMY Tech Manual.

M2308 $225.00

UNUSED SLIDE PROJECTION ASSEMBLY

We believe these were made for some of the Kodak

35mm slide projectors. We know it fits the Kodak

Ektagraphic III ATS projector. Assembly includes a

Halogen 300 Watt, 82 Volt GE #EXR projection lamp

(used in Kodak Carousel slide projectors), a dichroic

mirror, 50mm x 45mm x 2mm thick, and a DCX

condenser lens, 50mm wide x 55mm long. The mirror
passes the heat straight thru and reflects the light thru the condenser
lens. Front has a small door labeled "Reading Light" that opens to
expose an opaque Fresnel lens that lets out some light from inside.
We see the projection bulb alone selling for more than our price for
the entire assembly. Unused.

M2407 $15.00

Miscellaneous - Page 95

Surplus Shed – www.SurplusShed.com

ELECTRONIC CAMERA SHUTTER ASSEMBLY

This is an automatic shutter unit made for a camera

and is a beauty. Complete with 2 solenoids, cadmium

sulfide photo electric light sensor that determines the

exposure and tells the solenoids when to open and close

and hence the shutter speed. Has a Mitsubishi

M51081P integrated circuit which we believe to be a

self timing chip and film speed sensor. We don't know
what camera it was made for and don't have voltage requirements or other
specs. Assembly is 2-3/4" long by 2" wide. Shutter opening is 1/2". They
are marked "7X1E". Unused in original static shielding bag.

M2410 $5.00

ROUND CERAMIC MAGNETS, 18MM DIA BY 5MM THICK

Strong magnets, perfect size for experimenting.

Unused package of 10

M2415 $2.50 or 10 for $20.00

ROUND CERAMIC MAGNETS, 13MM DIA BY 5MM THICK, 2MM
CENTER HOLE

Strong magnets, perfect size for experimenting. Has a

2mm diameter center hole. Unused package of 10

M2416 $1.50 or 10 for $12.00

CD LASER DIODE/MOTOR ASSEMBLY

Here's the complete laser assembly that

appears to have been made for CD's.

Includes laser diode assembly with small

right angle prism and focusing lens as well

as a Mabuchi motor #RF-300C-11400
(runs off 5.9VDC). We don't have any additional specs,
but this should be a lot of fun to experiment with.
Unused.

M2417 $5.00

Page 96 - Miscellaneous

To Order, call toll free: 1-877-7SURPLUS

ENIDINE DASHPOT SHOCK ABSORBERS
W/HARDWARE

Miniature hydraulic non-adjustable shock

absorber in a fully threaded cylinder

body. Dashpot type damping. Provides

effective reliable deceleration and vibra-

tion control for light loads. Enidine
#4E5490. 60mm long (including 10mm long rod) and
11mm diameter. Includes hardware. Unused

M2421 $4.75

SET OF 8 QUALITY PLASTIC GEARS

Smallest is 16mm diameter and largest is 37mm. One

has a metal insert. Heavy duty thermo plastic. If you

find the gear you are looking for in this set and need

more, we have quantities available individually or in sets.

Unused.

M2424 $4.95

QUALITY CZECH M-10-M GAS MASK

This is the Czech copy of the U.S. M17

gas mask and is of very high quality and

has the same features. This protective

M-10-M mask, coupled with a pair of LF-

10M face piece filters (included), pro­tects the face and eyes. The breathing channels protect
against biological and nuclear chemical agents used in the
form of vapors, gases, and aerosols. Includes Speech
Diaphragm, Valve Chamber, Head Harness, Special Plug
System for Drinking, and (2) LF-10M face piece Filters.
The LF-10M face piece filter ensures sufficient protec­tion against all known fighting poisonous agents except
for carbon monoxide. Unused. Limited supply.

M2514 $29.00

Miscellaneous - Page 97

Surplus Shed – www.SurplusShed.com

COMPLETE LASER OPTICAL SCANNER ASSEMBLY

Loaded with great precision parts. We think these

were made for higher end laser printers, but not cer-

tain. Includes a Laser polygon mirror/motor assembly

with driver board, laser diode with driver board, two

beautiful front surface mirrors, two coated precision

lenses and other parts. One of the mirrors is 250mm

long by 14mm wide by 8mm thick. The other is 160mm
by 10mm by 8mm thick. Mirror/motor is six sided. Both lenses appear to
be cylinder lenses (which makes sense as cylinder lenses can transform a
point of light into a line image). One is 100mm long by 10mm wide by 15mm
high at its peak and has a positive focal length of 180mm. The other appears
to have 0 focal length and is meniscus style 50mm long by 10mm wide by
10mm thick. Just one cylinder lens this size alone would cost you much
more than our price for this entire assembly. If you can figure out which
printer this was made for, you should buy them all as we see similar units
selling for over $175 on sale. Unused.

M2521 $28.50

RED LASER POINTER/PEN/LIGHT

These are great. Regular ball point pen

size fits in shirt pocket or purse. One

side is a standard ball point pen and the

other side is a strong red (650nm) laser

for pointing or collimating applications
and a regular blue light to see your car door lock in the
dark. Batteries are installed and a spare set of batter­ies included. This is something you can carry around with
you at all times instead of just a regular pen and you'll
be prepared. Two momentary switches on the side to
operate the laser beam and blue light. New.

M2524 $9.95

PACKAGE OF OVER 300 SHRINK TUBING PIECES

Here's a mix of 1 inch length shrink tuning with differ-

ent diameters.

M2534 $5.00

Page 98 - Miscellaneous

To Order, call toll free: 1-877-7SURPLUS