SURE THING INDUSTRY AND COMMERCE DEVELOPMENT SH62 User Manual

SH62

USE MANUEL

Pairing mode

Switch the power button to ON. SH62 will enter the paring mode automatically, the blue indicator will flash,
and then the Blue and Red indicator light will flash quickly, you’ll hear an audio tone. That’s means SH62 is
ready to connect to the Device.

Power off
Switch the power button to OFF, the red indicator will flash ,You will hear an indication tone.

Answering calls

Short press the MFB button once to answer an incoming call. You will hear an indication tone.

End calls

Short press the MFB button once to end the call. You will hear an indication tone.

Reject calls

When incoming call , press MFB for 2S to reject an incoming call. You will hear an indication tone and the
call will be ended.

Volume up

Press Vol+.

Volume down

Press Vol-.

Last number redials

In the standby mode, double click the MFB button to redial the last number.

Voice dial (Siri Function)

In the standby mode, press & hold the,MFB button for 1.5 seconds to activate the voice command function
on Andriod or iOS devices. Refer to the phone manual for detailed instruction if applicable.

VoiceTransfer
During a call, hold the “Vo+” for 2 seconds until you hear a tone. The call will be transferred from your
HEADSET to your mobile device. You can repeat the step to transfer a call back to SH62.

Mute

While taking a phone call, press and hold Vo- with 2 seconds to mute your MIC,and you can repeat th
e operation to open the MIC.You will be hear warning tone every 10’S

Play and Pause music
Short press the MFB button to play or pause music .

Play previous song

Press and hold the” Vo- “ for 2S to play PREV song.

Play next song

Press and hold the” Vo+ “ for 2S to playNEXT song.

Battery energy

When connect with iPhone devices, there will show battery capacity of headset

Pairing with two devices:

1.Disconnect SH62 from the first paired mobile phone by disable the Bluetooth function on the mobile
phone,the SH62 will enter into pairing mode automatically.

2.Search and connect with the second device

3. Enable the Bluetooth feature on the first paired Mobile phone. SH62will be connected with both mobile

phones now.

4.While you are having a phone call with first mobile, and same time there is a incoming call from second
mobile. Double press multi function button to answer the second phone call and hold the first phone call,
you could double press multi function button to transfer between two mobiles phone call.
Or long press multi function 2S to reject the second call.

Remarks

1.If SH62 stand by with paring mode for 5 min and without connection, It will be exit paring mode
automatically, also, the device will power off after another 5 min.

NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.