Surefire executive series User Manual

EXECUTIVE SERIES

Lithium Powered

Flashlights

With the purchase of this SureFire
flashlight, you have invested in one of the
world’s best “illumination tools.”

We believe it to be a prime example of
our philosophy that design decisions should
always be made in the interest of the product
being the very best it can be.

Frequently, this means deciding to use a
more costly process or a more expensive
material than would normally be called for.
We know that in order to produce the best,
one must do it right.

We thank you for supporting this
decision and electing to confirm our belief in
“no compromise” in a product that, by its
performance and reliability, may some day
be called upon to save your life.

There is no other choice.

John Matthews
President, SureFire

WELCOME

TO THE SUREFIRE TEAM

You have just become the owner of one of the most
incredible pieces of lighting technology ever
conceived. It is a masterpiece of engineering, a
member of the SUREFIRE family which has
gained the acceptance and respect of military and
law enforcement professionals around the world.

You can have confidence that your choice of a
SUREFIRE light will always reward you with
years of superb, unfailing performance.

THE

EXECUTIVE SERIES

Slim, unobtrusive, and extremely powerful,
Executive series flashlights are a favorite of
undercover police officers, who appreciate the fact
that these compact flashlights are as powerful as
much larger flashlights yet remain small enough to
hide in a pocket.

SureFire strives to design and manufacture lights
of ever increasing brightness and quality while
setting new standards for maximum power with
minimal size. Three things characterize every
product: compact size, flawless high-output beam,
and extreme ruggedness. Every SureFire
illumination tool is guaranteed to produce a
flawless beam and spot surrounded by a perfect
corona of softer light.

To push the limits of light output, SureFire lamps
feature a tungsten filament in a high-pressure
Xenon gas atmosphere.

To ensure maximum output, each lamp and
reflector are matched at the factory and pre­focused within .005”. No need to twist the bezel to
get your light in focus, it’s already done no matter
what distance you are looking at.

LIGHT ACTIVATION

The Executive Series has two methods of light
activation. The tailcap pushbutton switch can be
pressed for momentary and constant light.

MOMENTARY-ON

Partially depress the tailcap pushbutton switch for
momentary activation. Note: If light fails to function,
the tailcap may be in the lock-out position; the tailcap
must be tightened for the light to activate.

CONSTANT-ON

For constant light, fully depress the tailcap pushbutton
switch to the “click-on” position.

CAUTION

Ensure that the flashlight cannot be turned on when
stored or being transported. If the lamp is activated while
in a case or other container, the lamp could overheat and
cause damage to surrounding materials. Store flashlight
in the lock-out position or remove batteries.

FOR ONE-BATTERY MODELS

HIGH-OUTPUT

Runtime/lumen output

MN01 Lamp Assembly

90 minutes/15 lumens

FOR TWO-BATTERY MODELS

HIGH-OUTPUT

ULTRA HIGH-OUTPUT

Runtime/lumen output

Runtime/lumen output

75 minutes/60 lumens

MN02 Lamp Assembly

2.5 hours/25 lumens

MN03 Lamp Assembly

EXECUTIVE SERIES

LAMP
ASSEMBLY

FLASHLIGHT BODY

BEZEL

LITHIUM BATTERIES

TAILCAP

PUSH BUTTON

Model E2D

Model E1e

BATTERY INSTALLATION

1. Unscrew the bezel and insert new batteries
with the positive (+) terminals facing bezel.
Replace bezel and depress tailcap pushbutton
switch to test. If light fails to function, the
tailcap may be in the lock-out position.
Rotate the tailcap clockwise until momentary
activation is possible.

CAUTION

Lithium batteries can explode or cause burns if
disassembled, shorted, recharged, exposed to
water, fire, or high temperatures. Do not place
loose batteries in pocket, purse, or other container
containing metal objects, mix with used or other
battery types, or store with hazardous or
combustable materials. Store in cool, dry,
ventilated area. Follow applicable laws and
regulations for disposal.

LIGHT ACTIVATION

Rotate bezel (head) counter-clockwise to remove.
Remove lamp/reflector assembly and replace with
recommended assembly.

BEZEL

LAMP
ASSEMBLY

FLASHLIGHT BODY

CUSTOMER SERVICE

Repairs and Replacements

To obtain repair or replacement contact Customer
Service at 800-828-8809 (toll free) or 714-545­9444 and obtain a Return Authorization number
(RA#). Then package the unit carefully and return
(no COD’s please) to:

SureFire LLC
Repairs Department, RA# ___
17680 Newhope Street, Suite B
Fountain Valley, CA 92708

SureFire will pay any reasonable shipping costs to
return the unit to you.

©SureFire LLC 2001 All Rights Reserved

14150-19 /4-1-05

ACCESSORIES

BeamFilters: Red F05

Blue F06
Infrared F03

BeamShaper F04

SC3 Spares Carrier SC3

Quick-Detach Holster V82

Lanyard with Ring Z50

KL1 LED Conversion Head KL1

KL4 LED Conversion Head KL4

(KL4 for use with E2e & E2D only)

Custom Engraving:
Engraving of name, logo, slogan or other icons is available to
personalize your SureFire product.
Call Customer Service For Details.