Surebonder 601, 701, 702, 707, 708 User Manual

1. PRODUCT IDENTIFICATION

2. HAZARD IDENTIFICATION

US DOT SYMBOLS

CANADA (WHMIS) SYMBOLS

EUROPEAN and (GHS) Hazard Symbols

Non-Regulated Materal

Not Controlled

Signal Word: Warning!

EU LABELING AND CLASSIFICATION:

Classification of the substance or mixture according to Regulation (EC) No1272/2008 Annex 1

CAS# 24937-78-8 is not listed in ESIS
CAS# 69430-35-9 is not listed in ESIS
EC# 232-479-9 This substance is not classified in the Annex I of Directive 67/548/EEC
CAS# 68441-37-2 is not listed in ESIS
CAS# 9002-88-4 is not listed in ESIS
Substances not listed either individually or in group entries must be self classified

COMPONENT(S) DETERMINING HAZARD:

All Ingredients

GHS Hazard Classification(s):

Acute Oral Toxicity Category 5
Eye Irritant Category 2B
Acute Dermal Toxicity Category 5

Prepared to U.S. OSHA, CMA, ANSI, Canadian WHMIS Standards, Australian WorkSafe, Japanese Industrial Standard JIS Z 7250:2000, and European Union standards

SAFETY DATA SHEET

TRADE NAME (AS LABELED): Hot Melt Glue
PRODUCT NUMBERS: 601, 701, 702, 707, 708, 711, 724, 725, 726, 727, 735, 738,

739, 3100,3120, 3130, 3140, 3145, 3150, 3170, 3190, 3210, 3220,

CHEMICAL NAME: Hot Melt Glue

3240, All DT, GL, CO and HL series

PRODUCT USE: Hot Melt Adhesive
MANUFACTURER'S NAME: FPC Corporation
ADDRESS: 355 Hollow Hill Drive

Wauconda, IL 60084
BUSINESS PHONE: [phone]
FAX NUMBER: 847-487-0174
DATE OF PREPARATION: December 4, 2013

EMERGENCY OVERVIEW:
Product Description: This product is a solid in various colors, with no odor.
Health Hazards: Contact with molten material will cause thermal burns. This product is not expected to cause adverse

health effects when used as intended. Prolonged or extended contact with product may cause skin irritation. Direct
contact with eyes may cause irritation. Ingestion of this product is not a likely route of entry. May cause gastrointestinal
irritation if swallowed.

Flammability Hazards: This product is combustible above flash point >450°F (>232°C) if exposed to ignition source.
Reactivity Hazards: None known.
Environmental Hazards: This material is not expected to be an environmental hazard
Emergency Considerations: Emergency responders must wear the proper personal protective equipment (and have

appropriate fire-suppression equipment) suitable for the situation to which they are responding.

Page 1 of 6

Hazard Statement(s):

Precautionary Statement(s):

H320: Causes eye irritation
H303: May be harmful if swallowed
H313: May be harmful in contact with skin

P264: Wash hands thoroughly after handling
P270: Do not eat, drink or smoke when using this
product
P280: Wear protective gloves/protective clothing/eye
protection/face protection

EU HAZARD CLASSIFICATION PER DIRECTIVE 1999/45/EC:

[Xi] Irritant

Risk Phrases:

R22: Harmful if swallowed
R36/38: Irritating to eyes and skin

Safety Phrases:

S24/25: Avoid contact with skin and eyes
S46: if swallowed, seek medical advice immediately
and show container or label.

HEALTH HAZARDS OR RISKS FROM EXPOSURE:

ACUTE: Contact with molten material will cause thermal burns. This product is not expected to cause adverse health

effects when used as intended. Prolonged or extended contact with product may cause skin irritation. Direct contact
with eyes may cause irritation. Ingestion of this product is not a likely route of entry. May cause gastrointestinal
irritation if swallowed. Not expected to cause respiratory irritation.

CHRONIC: None known
TARGET ORGANS:

ACUTE:

Eye, Skin

CHRONIC:

None known

3. COMPOSITION and INFORMATION ON INGREDIENTS

Hazardous Ingredients:

CAS #

EINECS #

ICSC #

WT %

Hazard Symbol;

Risk Phrases

Ethylene Vinyl Copolymer

24937-78-8

Not Listed in

ESIS

Not Listed

55 - 75%

HAZARD CLASSIFICATION: [Xi] Irritant
RISK PHRASES: R36/38

Resin

69430-35-9

Not Listed in

ESIS

Not Listed

0 – 45%

HAZARD CLASSIFICATION: [Xi] Irritant
RISK PHRASES: R36/38

Resin acids and Rosin acids,
esters with pentaerythritol

8050-26-8

232-479-9

Not Listed

0 – 45%

HAZARD CLASSIFICATION: [Xi] Irritant
RISK PHRASES: R36/38

Hydrocarbon resin

68441-37-2

Not Listed in

ESIS

Not Listed

0 – 45%

HAZARD CLASSIFICATION: [Xi] Irritant
RISK PHRASES: R36/38

Polyethylene Wax

9002-88-4

Not Listed in

ESIS

Not Listed

0 – 10%

HAZARD CLASSIFICATION: [Xi] Irritant
RISK PHRASES: R36/38

Balance of other components. Each of the other components is present in less than 1 percent concentration (0.1% concentration for
potential carcinogens, reproductive toxins, respiratory tract sensitizers, and mutagens)

4. FIRST-AID MEASURES

SAFETY DATA SHEET

NOTE: ALL WHMIS required information is included in appropriate sections based on the ANSI Z400.1-2010 format. This

product has been classified in accordance with the hazard criteria of the CPR and the MSDS contains all the
information required by the CPR, EU Directives and the Japanese Industrial Standard JIS Z 7250: 2000. This material is
classified as non-hazardous under OSHA regulations 29 CFR 1910.1200.

Contaminated individuals of chemical exposure must be taken for medical attention if any adverse effect occurs.
Rescuers should be taken for medical attention, if necessary. Take copy of label and MSDS to health professional with
contaminated individual.
SKIN CONTACT: Exposure to non-molten product is not expected to cause adverse effects. Wash hands after handling. If
hot molten product contacts skin, cool under running water. Do not remove solidified product. The contaminated individual
should seek medical attention.
EYE CONTACT: Exposure to non-molten product is not expected to cause adverse effects. If hot product enters the eyes,
flush with water for at least 15 minutes. Contaminated individual should seek medical attention immediately.
INHALATION: If breathing becomes difficult remove contaminated individual to fresh air. Seek medical attention if breathing
difficulties continues.

Page 2 of 6