Supertooth VOICE USER MANUAL

A. Product Description

SUPERTOOTH VOICE is a Bluetooth handsfree kit

that supports headset or handsfree prole phones. Its

special features include Full DSP Noise Cancellation/

Echo Cancellation. Thus, it provides an advanced audio
quality. It is designed for easy handsfree operation and
superior performance.

This kit includes Text-To-Speech system. The voice

anno unces instructions fo r the users in 6 diffe rent

lang uages . It indicates the status of the Bluetooth
device and it announces the name (or phone number if
contact not loaded to kit) of the incoming caller!

Don’t forget: Drive safely and within the law.

Check if the national or local legislation into force in your
country does limit the use of mobile phones while driving.
It is up to the user of this product to respect the said
legislation in the area where he lives.

B. Product Overview

1 MFB or Multi-function Button

(power on & off / pairing / answer /
voice dial / redial / audio transfer)

2 End/Reject Button
(end & reject call / reload phonebook)

3 Bluetooth Indicator
4 Charge Indicator

5 Microphone
6 Speaker
7 Volume Down
8 Volume Up
9 Charger Port
10 Magnets

EN

3

C. Charging

1. Connect the charger’s plug into the Charger Port (9)
of the SUPERTOOTH VOICE. Connect the charger

to an external power source.

Charge Indicator (4) Status:
Steady red: Low Batt Speech: Low battery

Steady orange: Charging Speech: Charging
Steady green: Full Charge Speech: Fully Charged

2. When fully charged, disconnect
the charger.

D. Power On/Off

Power On: Press MFB (1) for 1 second. The Bluetooth

Indicator (3) will turn blinking blue and a voice will say,

“SUPERTOOTH VOICE ready. Connected to phone
(or if phone not available: No phone detected).”

Note: The rst time the SUPERTOOTH VOICE is
switched on, the language selection is automatically ac­tivated. In this case, proceed to Section E (Procedure 2).

Power Off: Press and hold MFB (1) for 5 seconds until

a voice announces, “SUPERTOOTH VOICE powering

4

down.” The Bluetooth Indicator (3) will turn steady
red for 4 seconds and then turns off.

E. Selecting Language and
Pairing to your Bluetooth mobile Phone

There are 6 languages featured in this kit. They are British
English, American English, French, Italian, Spanish and
German.

After selecting your language, pair the SUPERTOOTH
VOICE to your Bluetooth mobile phone to create the link
or audio connection between the two. Pairing should be
done only at the rst connection to a phone.

Procedure:

1. From OFF, press and hold MFB (1) for 6 seconds until
the Bluetooth Indicator (3) turns blinking red/blue.

A voice will then announce, “Press green button
to select British English.” Instructions for other

languages will be announced succeedingly.

2. As soon as the preferred language is spoken, press

the green button or MFB (1) to enable it. If British

English is chosen, a voice will announce “British

English selected. From phone’s Bluetooth menu,

search for devices then select ST VOICE and enter

pincode 0000.” This means the kit is now ready to pair.

Note: If you selected the wrong language, just turn off the
SUPERTOOTH VOICE and bring it back to pairing mode to
be able to select one more time from the available languages.

3. While the kit is in pairing mode, access the Bluetooth
menu of your phone. Turn on the Bluetooth function
then execute a Bluetooth search. (See your phone’s
manual.)

4. When the phone displays the list of Bluetooth devices,

select ST VOICE.

5. Enter password/pin code 0000 and press OK.

successful to phone. Loading phonebook. Please
wait.” will be announced on the kit.

6. The contacts in your phone will be downloaded to the
kit. The Bluetooth Indicator (3) turns violet for 1-2

seconds.

Note: Some phones will display a question or request

on the phone screen before it allows the kit to download
the phonebook. Just accept any request (e.g.
Connection...?, Allow Internet access…?, DUN…?).

“Pairing

7. The number of contacts will be announced while the
download is ongoing.

IMPORTANT NOTICE: Some Symbian phones do not
support automatic Phonebook downloading. In this
case, “Automatic transfer not supported by phone.

Please refer to manual or press red button to cancel
phonebook transfer.” will be announced then proceed

to Section F to transfer the phonebook manually from
the phone menu to the kit or press red button or End/

Reject Button (2) of SUPERTOOTH VOICE to connect
the kit to the phone without phonebook transfer.

8. When download is complete,
ready. Connected to phone” will be announced.
Accept connection request from the phone if a prompt
is displayed.

Important Note:

Most phones automatically connect to the kit after pairing.
With some phones you need to connect manually after
pairing. Go back to Bluetooth > Paired devices > highlight

ST VOICE > press Options > then press Connect.

The kit is now ready to use. When a call is received on

“SUPERTOOTH VOICE

5