Supertooth LIGHT USER MANUAL

Bluetooth Handsfree Kit

For Bluetooth Mobile Phones

Product Description

SUPERTOOTH LIGHT is a Bluetooth handsfree kit that supports headset or

handsfree prole phones. Its special features include Full DSP Noise Cancellation/
Echo Cancellation. Thus, it provides an advanced audio quality. It is designed for
easy handsfree operation and superior performance.

Don’t forget: Drive safely and within the law.

Check if the national or local legislation into force in your country does limit the use
of mobile phones while driving. It is up to the user of this product to respect the
said legislation in the area where he lives.

Product Overview

1 Accept Button

2 End/Reject Button

3 Bluetooth Indicator

4 Charge Indicator

5 Microphone Shaft

*Press-and-release to Switch On

*Push-in to Switch Off

6 Speaker

7 Volume Down

8 Volume Up

9 Charger Port

10 Magnets

2

Charging

When the Charge Indicator (4) turns red, the battery of the kit is low. Charge the
unit.

1. Connect the charger’s plug into the Charger Port (9)
of the SUPERTOOTH LIGHT. Connect the charger to
an external power source.

Charge Indicator (4) Status:

Steady red: Low Batt
Steady orange: Charging
Steady green: Full Charge

2. When fully charged, disconnect the charger.

Power On/Off

Power On: Press-and-release the Microphone Shaft (5).

Power Off: Push the Microphone Shaft (5) in.

Pairing to your Bluetooth Mobile Phone

Pair the SUPERTOOTH LIGHT to your Bluetooth mobile phone to create the link or
audio connection between the two. This has to be done only at the rst connection
to a new phone.

1. From OFF, press and hold the Accept Button (1).

2. While holding the Accept Button (1), switch the kit on (Press-and-release the

Microphone Shaft (5)).

3. When the Bluetooth Indicator (3) turns blinking red/blue, release the

Accept Button (1). The kit is now in pairing mode.

3

4. While the kit is in pairing mode, access the Bluetooth menu of your phone.

Turn on the Bluetooth function then execute a Bluetooth search, or discover.
(See your phone’s manual.)

5. When the phone displays the list of Bluetooth devices, select ST LIGHT.

6. When the phone asks for the password, enter 0000 and press Ok.

Important Note: The kit is paired now. Most phones automatically connect
to the kit after pairing. With some phones you need to connect manually after
pairing.
Go back to Bluetooth > Paired devices > highlight ST LIGHT > press

Options > then press Connect.

The kit is now ready to use.

Installation

Fix the metal clip of SUPERTOOTH LIGHT on the sun visor.

Attach the magnetic back of SUPERTOOTH LIGHT to the xed metal clip. The
SUPERTOOTH LIGHT must be placed in such way that its microphone is directed
to the mouth of the user.

Basic Operations

IMPORTANT:

The kit needs to be ‘paired’ to your Bluetooth mobile phone rst, before you can
use the following functions. See Pairing to your Bluetooth Mobile Phone on
page 4.

Make a Call (Normal Dial):

Dial the number on your phone. Audio will automatically be on the kit.

Note: With some phones like Siemens S55 and Panasonic X70, audio is always
on the phone during an outgoing call. You will need to press the Accept Button
(1) for 1 second to transfer the audio to your kit.

4

Answer a Call:
During the ring tone, press Accept Button (1) for 1 second to answer the call.

End a Call:
Press End/Reject Button (2) for 1 second to end the call.

Voice Dial:
Important: Be sure the voice dialling function of your phone is activated. Record at

least one voice tag. (Kindly refer to the procedure in your phone’s manual.)

Note: Voice dialling entries must be stored in the phone’s memory, not on the SIM
card!

1. Press the Accept Button (1) for 1 second.

2. A voice dial beep will be heard on the kit to prompt the user to say the voice
tag of the contact to call.

3. Say the voice tag exactly as how you recorded it.

4. The voice will be played back to you, and then the phone will dial the number
automatically.

Redial (For Handsfree Prole Phones only):
Press Accept Button (1) for 3 seconds. The last dialled number will be redialled.

Reject a Call (For Handsfree Prole Phones only):
During the ring tone, press End/Reject Button (2). The incoming call will be rejected.

Volume Setting:
Increase or decrease the volume by pressing the Volume Up (8) or Volume Down
(7) button. Press repeatedly until desired level is reached.

Audio Transfer (For Handsfree Prole Phones only):

During an ongoing call, you can transfer the audio.

Kit to Phone: Push in the Microphone Shaft (5) or turn off the kit. The audio will
be transferred to the phone.

Phone to Kit: Press-and-release the Microphone Shaft (5) or turn on the kit.

Note: Some phones do not connect automatically to the kit after turning on. With
these phones, you need to press Accept Button (1) for 1 second to transfer the
audio to the kit.

Advanced Functions

Multi-Pairing / Switching Connections Between Phones:

The SUPERTOOTH LIGHT can be paired to 5 Bluetooth phones. An additional
pairing will automatically delete the phone that has not been used for the longest
time. Thus, the SUPERTOOTH LIGHT always maintains 5 phones in its memory.

You can easily switch to any of the paired phones by:

5

1. Disconnecting the currently used phone using the “Active devices” in the
Bluetooth menu of that phone.

2. Connecting to the wanted phone by using the “Paired devices” in the Bluetooth

menu of that wanted phone.

Note: Reconnection to a paired phone can also be done by pressing the Accept
Button (1). But when you press the Accept Button (1), the SUPERTOOTH LIGHT

will attempt to connect to the last used phone only. Therefore, it is recommended to
connect to another paired phone using the phone menu.

SUPERTOOTH LIGHT Specications

Bluetooth Compliance: Bluetooth version 1.2 specications

Supported Bluetooth Proles: Supports headset and handsfree proles with

automatic detection

Operating Range: Up to 10 meters

Frequency: 2.4 GHz

Talk Time: Up to 15 hours

Stand-by time: Up to 800 hours

Charging Time: 3 hours

Battery Type: Rechargeable Lithium Ion

Special Features: *Full Duplex

*Full DSP Noise Cancellation / Echo Cancellation
*Digital Volume Control

*Voice Recognition Dialling (If phone supports)

*Last Call Redial
*Reject Incoming Call
*Can also be charged directly from a PC via

USB Cable (not included)

Installation: Quick xation on sun visor via magnetic clip

Dimensions (mm): 18.2 x 60.2 x 122

Weight: 115 g

. . . . . . . .

. . . . . . . .

. . . . . . .

. . . . . . .

. . . . . . . .

. . . . . . . . . .

. . .

. . . . .

. . . . . .

. . . . .

*Compact Size

. . . . .

6