SUPERTOOTH BT F6 User Manual

Supertooth BT F6

Bluetooth Headset

PRODUCT OVERVIEW :

1. ON/OFF or PAIRING button

2. MUSIC button

3. FM button

4. PHONE button

5. DOWN button

6. UP button

7. VOL+ button

8. VOL- button

9. LED Status indicator

10. Charging port

11. Headset port

TURNING ON/OFF BT F6

Power ON: Long press ON/OFF or PAIRING button (1). Led turns purple and Power On beep

heard together with the voice prompt announcing the battery level.

Power OFF: Long press ON/OFF or PAIRING button (1). Led turns purple and Power OFF beep

heard together with the voice prompt announcing the battery level.

PAIRING BT F6 TO A BLUETOOTH MOBILE PHONE:

1. From OFF, Long press ON/OFF or PAIRING button (1) until LED Status indicator (9).

Alternately blinking red/blue (Pairing mode).

2. On your Phone, turn on the Bluetooth function then execute Bluetooth search. (See your

phone’s manual).

3. When the phone displays the list of Bluetooth devices, select F6 then enter pin code 0000 (if

phone ask for the Pairing pin code) and press ok. A voice prompts “Pairing Successful,
connected to phone” if BT F6 is successfully paired to phone and LED Status indicator (9)

blinking blue twice every 2sec.

Receiving Incoming Call:

Answer Call: Short press PHONE button (4) to accept the incoming call.

End Call: Short press PHONE button (4) to end the ongoing phone call.

Reject Call: Short press ON/OFF or PAIRING button (1) to reject the incoming call.

Volume UP: Press VOL+ button (7) to increase ongoing phone call audio volume level.

High beep will be heard if reach to maximum level.

Volume DOWN: Press VOL- button (8) to decrease ongoing phone call audio volume level.

Low beep will be heard if reach to minimum level.

Phone Call Audio Transfer: Long Press PHONE button (4) for about 3 sec. or after the 2nd

beep to transfer ongoing call audio from headset to phone or phone to headset.