Supertex DN2530 Datasheet

Supertex inc.

N-Channel Depletion-Mode

= “Green” Packaging

Vertical DMOS FETs

DN2530

Features

► High input impedance ► Low input capacitance ► Fast switching speeds ► Low on-resistance ► Free from secondary breakdown ► Low input and output leakage

Applications

► Normally-on switches ► Solid state relays ► Converters ► Linear ampliers ► Constant current sources ► Power supply circuits ► Telecom

Ordering Information

Part Number Package Option Packing

DN2530N3-G 3-Lead TO-92 1000/Bag

DN2530N3-G P002

DN2530N3-G P003

DN2530N3-G P005

3-Lead TO-92 2000/Reel

DN2530N3-G P013

DN2530N3-G P014

DN2530N8-G

-G denotes a lead (Pb)-free / RoHS compliant package. Contact factory for Wafer / Die availablity. Devices in Wafer / Die form are lead (Pb)-free / RoHS compliant.

3-Lead TO-243AA (SOT-89)

2000/Reel

Absolute Maximum Ratings

Parameter Value

General Description

The DN2530 is a low threshold depletion-mode (normallyon) transistor utilizing an advanced vertical DMOS structure and Supertex’s well-proven silicon-gate manufacturing process. This combination produces a device with the power handling capabilities of bipolar transistors and with the high input impedance and positive temperature

coefcient inherent in MOS devices. Characteristic of all

MOS structures, this device is free from thermal runaway and thermally-induced secondary breakdown.

Supertex’s vertical DMOS FETs are ideally suited to a wide range of switching and amplifying applications where high breakdown voltage, high input impedance, low input capacitance, and fast switching speeds are desired.

Product Summary

R

BV

DSX

/BV

DGX

DS(ON)

(max)

300V 12Ω 200mA

I

DSS

(min)

Pin Conguration

DRAIN

SOURCE

TO-92

GATE

TO-243AA (SOT-89)

SOURCE

DRAIN

Drain-to-source voltage BV

Drain-to-gate voltage BV

Gate-to-source voltage ±20V

Operating and storage temperature -55OC to +150OC

Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is not implied. Continuous operation of the device at the absolute rating level may affect device reliability. All voltages are referenced to device ground.

Typical Thermal Resistance

Package θ

3-Lead TO-92 132OC/W

3-Lead TO-243AA (SOT-89) 133OC/W

Doc.# DSFP-DN2530 A062713

DSX

Product Marking

DGX

Package may or may not include the following marks: Si or

SiDN 2530 YYWW

YY = Year Sealed WW = Week Sealed = “Green” Packaging

TO-92

DN5TW

ja

Package may or may not include the following marks: Si or

W = Code for week sealed

TO-243AA (SOT-89)

Supertex inc.

www.supertex.com

DN2530

0V

Thermal Characteristics

I

Package

D

(continuous)

†

TO-243AA 200mA 500mA 1.6W

TO-92 175mA 500mA 0.74W 175mA 500mA

Notes:

† ID (continuous) is limited by max rated Tj. ‡ Mounted on FR4 board, 25mm x 25mm x 1.57mm.

I

D

(pulsed)

Power Dissipation

@TA = 25OC

‡

†

I

DR

I

DRM

200mA 500mA

Electrical Characteristics (T

= 25OC unless otherwise specied)

A

Sym Parameter Min Typ Max Units Conditions

V

ΔV

BV

GS(OFF)

I

GSS

Drain-to-source breakdown voltage 300 - - V VGS = -5.0V, ID = 100µA

DSX

Gate-to-source off voltage -1.0 - -3.5 V VDS = 25V, ID = 10µA

Change in V

with temperature - - -4.5 mV/OC VDS = 25V, ID = 10µA

GS(OFF)

Gate body leakage current - - 100 nA VGS = ±20V, V

- - 10 µA VDS = Max rating, VGS = -10V

I

D(OFF)

I

DSS

R

DS(ON)

ΔR

DS(ON)

G

C

ISS

C

OSS

C

RSS

t

d(ON)

t

d(OFF)

t

V

SD

t

rr

Notes:

1. All D.C. parameters 100% tested at 25OC unless otherwise stated. (Pulse test: 300µs pulse, 2% duty cycle.)

2. All A.C. parameters sample tested.

Drain-to-source leakage current

- - 1.0 mA

VDS = 0.8 Max Rating, VGS = -10V, TA = 125OC

Saturated drain-to-source current 200 - - mA VGS = 0V, V

Static drain-to-source on-state resistance

Change in R

Forward transconductance 300 - - mmho VDS = 10V, ID = 150mA

FS

with temperature - - 1.1 %/OC VGS = 0V, ID = 150mA

DS(ON)

Input capacitance - - 300

Common source output capacitance - - 30

Reverse transfer capacitance - - 5

- - 12 Ω VGS = 0V, ID = 150mA

VGS = -10V,

pF

VDS = 25V, f = 1MHz

Turn-on delay time - - 10

Rise time - - 15

r

Turn-off delay time - - 15

Fall time - - 20

f

ns

VDD = 25V, ID = 150mA, R

= 25Ω,

GEN

Diode forward voltage drop - - 1.8 V VGS = -10V, ISD = 150mA

Reverse recovery time - 600 - ns VGS = -10V, ISD = 1.0A

DS

= 0V

DS

= 25V

Switching Waveforms and Test Circuit

90%

INPUT

10%

-10V

VDD

OUTPUT

Doc.# DSFP-DN2530 A062713

0V

t

d(ON)

t

(ON)

10%

90%

t

(OFF)

t

r

t

d(OFF)

t

f

90%

10%

2

Pulse

Generator

R

GEN

INPUT

VDD

R

L

OUTPUT

D.U.T.

Supertex inc.

www.supertex.com

Typical Performance Curves

Output Characteristics

Saturation Characteristics

DN2530

1.0

0.8

0.6

(amperes)

0.4

D

I

0.2

0

0 50 100 150 200 250

V

(volts)

DS

Transconductance vs. Drain Current

0.5

0.4

V

DS

= 10V

TA = -55°C

V

GS

0.5V

-0.5V

-1.0V

-1.5V

= 1.0V

0V

0.25

0.2

0.15

(amperes)

0.1

D

I

0.05

0

0 1 2 3 4 5

Power Dissipation vs. Ambient Temperature

2.0

0.5V

V

GS

= 1.0V

V

DS

-0.5V

0V

-1.5V

(volts)

TO-243AA

1.6

-1.0V

0.3

(siemens)

FS

0.2

G

0.1

0

0 0.05 0.1 0.15 0.2 0.25

TA = 25°C

TA = 125°C

ID (amperes)

Maximum Rated Safe Operating Area

1

TO-92 (pulsed)

TO-92 (DC)

0.1

(amperes)

D

I

0.01

1.2

(watts)

D

P

0.8

TO-92

0.4

0

0 25 50 75 100 125 150

TA (°C)

Thermal Response Characteristics

1.0

0.8

0.6

0.4

0.2

Thermal Resistance (normalized)

TO-243AA

= 25°C

T

A

= 1.6W

P

D

TO-92

= 25°C

T

C

= 1.0W

P

D

0.001

Doc.# DSFP-DN2530 A062713

TC = 25°C

1 10 100 1000

V

(volts)

DS

0

0.001 0.01 0.1 1.0 10

tP (seconds)

Supertex inc.

3

www.supertex.com

Typical Performance Curves (cont.)

BV

Variation with Temperature

1.10

1.05

DSS

V

GS

I

= 100mA

D

= -5V

On-Resistance vs. Drain Current

50

V

= 0V

GS

40

DN2530

1.00

(normalized)

0.95

DSS

BV

0.90

0.85

-50 0 50 100 150

Tj (°C)

1.0

0.8

0.6

(amperes)

0.4

D

I

0.2

Transfer Characteristics

V

= 10V

DS

TA = -55°C

25°C

125°C

30

(ohms)

DS(ON)

20

R

10

0

0 0.2 0.4 0.6 0.8 1.0

ID (amps)

V

and R

GS(OFF)

2.5

2

1.5

(normalized)

1

GS(th)

V

0.5

Variation with Temperature

DS(ON)

R

@ ID = 150mA

DS(ON)

V

GS(OFF)

@ 10mA

200

150

100

C (picofarads)

50

0

Doc.# DSFP-DN2530 A062713

0

-2 -1 0 1 2

V

GS

(Volts)

Capacitance Vs. Drain-to-Source Voltage

f = 1MHz

= -10V

V

C

OSS

C

RSS

0 10 20 30 40

V

(Volts)

DS

GS

ISS

0

-50 0 50 100 150

Tj (°C)

Gate Drive Dynamic Characteristics

15

10

V

= 40V

5

(volts)

GS

V

0

DS

V

= 20V

DS

250pF

152pf

-5 0 1 2 3 4 5

(Nanocoulombs)

Q

C

Supertex inc.

4

www.supertex.com

3-Lead TO-92 Package Outline (N3)

D

Seating Plane

1 2 3

L

DN2530

A

Front View

E1

1

Bottom View

e1

2

b

e

c

Side View

E

3

Symbol A b c D E E1 e e1 L

MIN .170 .014

Dimensions

(inches)

NOM - - - - - - - - -

MAX .210 .022

JEDEC Registration TO-92.

* This dimension is not specied in the JEDEC drawing.

† This dimension differs from the JEDEC drawing.

Drawings not to scale. Supertex Doc.#: DSPD-3TO92N3, Version E041009.

Doc.# DSFP-DN2530 A062713

†

.014

.022

†

.175 .125 .080 .095 .045 .500

†

.205 .165 .105 .105 .055 .610*

Supertex inc.

5

www.supertex.com

3-Lead TO-243AA (SOT-89) Package Outline (N8)

D

D1

E

H

E1

C

DN2530

L

1 2 3

b

e

e1

Top View

b1

A

Side View

Symbol A b b1 C D D1 E E1 e e1 H L

†

1.50 BSC

3.00

BSC

3.94 0.73

Dimensions

(mm)

MIN 1.40 0.44 0.36 0.35 4.40 1.62 2.29 2.00

NOM - - - - - - - - - -

MAX 1.60 0.56 0.48 0.44 4.60 1.83 2.60 2.29 4.25 1.20

JEDEC Registration TO-243, Variation AA, Issue C, July 1986.

† This dimension differs from the JEDEC drawing Drawings not to scale. Supertex Doc. #: DSPD-3TO243AAN8, Version F111010.

(The package drawing(s) in this data sheet may not reect the most current specications. For the latest package outline

information go to http://www.supertex.com/packaging.html.)

Supertex inc. does not recommend the use of its products in life support applications, and will not knowingly sell them for use in such applications unless it receives

an adequate “product liability indemnification insurance agreement.” Supertex inc. does not assume responsibility for use of devices described, and limits its liability to the replacement of the devices determined defective due to workmanship. No responsibility is assumed for possible omissions and inaccuracies. Circuitry and specifications are subject to change without notice. For the latest product specifications refer to the Supertex inc. (website: http//www.supertex.com)

Doc.# DSFP-DN2530 A062713

6

Supertex inc.

1235 Bordeaux Drive, Sunnyvale, CA 94089

Tel: 408-222-8888

www.supertex.com

†