Supero X9SPV-M4, X9SPV-M4-3UE, X9SPV-M4-3QE User Manual

X9SPV-M4

X9SPV-M4-3QE

X9SPV-M4-3UE

USER’S MANUAL

Revision 1.0a

Manual Revision 1.0a

Release Date: August 13, 2014

Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document. Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their
respective companies or mark holders.

Copyright © 2014 by Super Micro Computer, Inc. All rights reserved.

Printed in the United States of America

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and docu­mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.
Any use or reproduction of this product is not allowed, except as expressly permitted by the terms
of said license.

IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE
USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.
SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED
WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,
INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall
be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all
claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reason­able protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
manufacturer’s instruction manual, may cause interference with radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turn­ing the equipment off and on, you are encouraged to try to correct the interference by one or more
of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and the receiver.

•Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

•Consult the dealer or an experienced radio/television technician for help.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn­ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.

WARNING: Handling of lead solder materials used in this product
may expose you to lead, a chemical known to the State of California
to cause birth defects and other reproductive harm.

iii

Preface

About This Manual

This manual is written for system integrators, PC technicians and

knowledgeable PC users. It provides information for the installation and use of the

X9SPV motherboard product (M series). This product is intended to be

professionally installed and serviced by a technician.

About This Motherboard

The X9SPV-M4 Motherboard is a value-driven product aimed at users who demand

a small form-factor, ultra low-power motherboard for storage, server, client, control

board and many embedded applications.

The X9SPV-M4 Motherboard features a mobile, 3rd generation Intel® Core™ i7

processor onboard in an FCBGA1023 package, offering many features such as two

ECC SO-DIMM memory support, Four SATA 2.0 ports, two SATA 3.0 ports, and three

independent displays with Intel® HD Graphics 4000. It also includes four gigabit

Ethernet LAN ports, AMT 8.0, vPro, TPM support and a Mini-PCIe slot with mSATA

support. These features enable the X9SPV-M4 Motherboard to deliver an energy-

efcient,lowpower,highperformanceplatform,inasmallmini-ITXform-factor.

Manual Organization

Chapter 1describesthefeatures,specicationsandperformanceofthemainboard

and provides detailed information about the chipset.

Chapter 2 provides hardware installation instructions. Read this chapter when in-

stalling the processor, memory modules and other hardware components into the

system. If you encounter any problems, see Chapter 3, which describes trouble-

shooting procedures for video, memory and system setup stored in the CMOS.

Chapter 4 includes an introduction to the BIOS and provides detailed information

on running the CMOS Setup utility.

Appendix A provides BIOS Error Beep Codes.

Appendix B lists Driver Installation Instructions.

Appendix C provides the UEFI BIOS Recovery Instructions.

Preface

iv

X9SPV-M4 Motherboard User’s Manual

Conventions Used in the Manual:

Special attention should be given to the following symbols for proper installation and

to prevent damage done to the components or injury to yourself:

Danger/Caution: Instructions to be strictly followed to prevent catastrophic

system failure or to avoid bodily injury

Warning: Critical information to prevent damage to the components or

data loss.

Important: Important information given to ensure proper system installa-

tion or to relay safety precautions.

Note: Additional Information given to differentiate various models or pro-

vides information for correct system setup.

v

Contacting Supermicro

Contacting Supermicro

Headquarters

Address: Super Micro Computer, Inc.

980 Rock Ave.

San Jose, CA 95131 U.S.A.

Tel: [phone]

Fax: [phone]

Email: [e-mail] (General Information)

[e-mail] (Technical Support)

Web Site: www.supermicro.com

Europe

Address: Super Micro Computer B.V.

Het Sterrenbeeld 28, 5215 ML

's-Hertogenbosch, The Netherlands

Tel: [phone]

Fax: [phone]

Email: [e-mail] (General Information)

[e-mail] (Technical Support)

[e-mail] (Customer Support)

Web Site: www.supermicro.nl

Asia-Pacic

Address: Super Micro Computer, Inc.

3F, No. 150, Jian 1st Rd.

Zhonghe Dist., New Taipei City 235

Taiwan (R.O.C)

Tel: [phone]

Fax: [phone]

Email: [e-mail]

Web Site: www.supermicro.com.tw

vi

X9SPV-M4 Motherboard User’s Manual

Table of Contents

Preface

About This Manual ........................................................................................................ iii

About This Motherboard ................................................................................................ iii

Manual Organization .....................................................................................................iii

Conventions Used in the Manual: .................................................................................iv

Contacting Supermicro ...................................................................................................v

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

Checklist .......................................................................................................... 1-1

X9SPV-M4 Image ........................................................................ 1-2

X9SPV-M4 Motherboard Layout ..................................................................... 1-3

X9SPV-M4 Quick Reference ........................................................................... 1-4

Jumper Descriptions ....................................................................................... 1-4

Ports, LEDs, and Connectors ......................................................................... 1-5

Motherboard Features ..................................................................................... 1-6

X9SPV-M4 Motherboard Block Diagram ......................................................... 1-8

1-2 Chipset Overview ........................................................................................... 1-9

1-3 PC Health Monitoring .................................................................................... 1-10

Recovery from AC Power Loss ..................................................................... 1-10

Onboard Voltage Monitoring ........................................................................ 1-10

Fan Status Monitor with Software ................................................................. 1-10

1-4 PowerCongurationSettings.........................................................................1-11

Slow Blinking LED for Suspend-State Indicator ............................................1-11

BIOS Support for USB Keyboard...................................................................1-11

Main Switch Override Mechanism .................................................................1-11

1-5 Power Supply .................................................................................................1-11

1-6 Super I/O ....................................................................................................... 1-12

Chapter 2 Installation

2-1 Static-Sensitive Devices .................................................................................. 2-1

Precautions ..................................................................................................... 2-1

Unpacking ....................................................................................................... 2-1

Tools Needed .................................................................................................. 2-2

Location of Mounting Holes ............................................................................ 2-2

2-2 Motherboard Installation .................................................................................. 2-2

Installation Instructions .................................................................................... 2-3

2-3 System Memory .............................................................................................. 2-4

vii

Table of Contents

How to Install SODIMMs ................................................................................. 2-4

Memory Support .............................................................................................. 2-4

The SODIMM Socket ...................................................................................... 2-5

2-4 Connectors/I/O Ports ....................................................................................... 2-6

Back Panel Connectors and I/O Ports ............................................................ 2-6

PS/2 KB/Mouse Port (KB/Mouse) .............................................................. 2-7

Universal Serial Bus (USB) ........................................................................ 2-8

VESA® DisplayPort™ (DisplayPort) .......................................................... 2-9

HDMI Port ................................................................................................. 2-9

DVI-I Port (DVI) .......................................................................................... 2-9

LAN Ports (LAN1~LAN4) ......................................................................... 2-10

Front Control Panel ........................................................................................2-11

JF1 Header Pins .......................................................................................2-11

FrontControlPanelPinDenitions............................................................... 2-12

Power LED .............................................................................................. 2-12

HDD LED .................................................................................................. 2-12

NIC1/NIC2 LED Indicators ....................................................................... 2-12

Overheat (OH)/Fan Fail/Power Fail/UID LED .......................................... 2-13

NMI Button .............................................................................................. 2-13

Power Fail LED ........................................................................................ 2-14

Reset Button ........................................................................................... 2-14

Power Button ........................................................................................... 2-14

2-5 Connecting Cables ........................................................................................ 2-15

ATX Power Connector (JPW1) ............................................................... 2-15

Fan Headers ............................................................................................. 2-16

Serial Port (COM1) ................................................................................... 2-16

Chassis Intrusion (JL1) ............................................................................ 2-17

TPM Header (JTPM1) .............................................................................. 2-17

SATA DOM Power (JSD1) ........................................................................ 2-18

Power SMB I2C Connector (JPI2C1) ....................................................... 2-18

System Management Bus (JSMB1) ......................................................... 2-18

Overheat/Fan Fail LED (JOH1) ................................................................ 2-19

Front Panel Audio (FP AUDIO) ................................................................ 2-19

Power LED/Speaker (JD1) ....................................................................... 2-20

Internal Speaker/Buzzer (SP1) ................................................................ 2-20

LAN3 and LAN4 LED Header (JPK1) ...................................................... 2-21

Wake-On-Ring (JWOR) ............................................................................ 2-21

Embedded DisplayPort (eDP) .................................................................. 2-22

Mini PCI-E Slot (Mini PCIE) ..................................................................... 2-23

viii

X9SPV-M4 Motherboard User’s Manual

2-6 Jumper Settings ............................................................................................ 2-24

Explanation of Jumpers ............................................................................ 2-24

SMB (I2C) Bus to PCI Slots (JI2C1/2) ...................................................... 2-25

Manufacturing Mode (JPME2).................................................................. 2-25

Audio Enable (JPAC1).............................................................................. 2-25

CMOS Clear (JBT1) ................................................................................. 2-26

USB Wake-Up (JPUSB1) ......................................................................... 2-27

Watch Dog Timer Reset (JWD1) .............................................................. 2-28

eDP Port Voltage Select (JEDP1) ............................................................ 2-28

PCI-E Slot Bifurcation (JRF1) .................................................................. 2-28

2-7 Onboard Indicators ........................................................................................ 2-29

LAN Port LEDs ......................................................................................... 2-29

Power LED (LED1) ................................................................................... 2-30

2-8 Serial ATA and HDD Connections ................................................................. 2-31

SATA Connections (SATA0~SATA5) ........................................................ 2-31

Chapter 3 Troubleshooting

3-1 Troubleshooting Procedures ........................................................................... 3-1

Before Power On ............................................................................................ 3-1

No Power ........................................................................................................ 3-1

No Video ......................................................................................................... 3-1

Memory Errors ............................................................................................... 3-2

IfYouLosetheSystem’sSetupConguration ............................................... 3-2

3-2 Technical Support Procedures ........................................................................ 3-2

3-3 Frequently Asked Questions ........................................................................... 3-3

3-4 Returning Merchandise for Service................................................................. 3-5

Chapter 4 BIOS

4-1 Introduction ...................................................................................................... 4-1

Starting BIOS Setup Utility .............................................................................. 4-1

HowToChangetheCongurationData ......................................................... 4-1

How to Start the Setup Utility ......................................................................... 4-2

4-2 Main Setup ...................................................................................................... 4-2

System Overview: The following BIOS information will be displayed: ....... 4-3

System Time/System Date ........................................................................ 4-3

Supermicro X9SPV-M4 .............................................................................. 4-3

Processor ................................................................................................... 4-3

System Memory ......................................................................................... 4-3

4-3 AdvancedSetupCongurations...................................................................... 4-4



BOOT Feature .............................................................................................. 4-4

ix

Table of Contents

Quiet Boot .................................................................................................. 4-4

Option ROM Messages .............................................................................. 4-4

Bootup Num-Lock ....................................................................................... 4-4

Wait For 'F1' If Error ................................................................................... 4-4

INT19 Trap Response ................................................................................ 4-5

Watch Dog Function ................................................................................... 4-5

Power Button Function ............................................................................... 4-5

Restore on AC Power Loss ........................................................................ 4-5



Processor and Clock Options....................................................................... 4-5

Hyper Threading ......................................................................................... 4-5

Active Processor Cores .............................................................................. 4-5

Limit CPUID Maximum ............................................................................... 4-6

Execute-Disable Bit (Available when supported by the OS and the CPU) 4-6

Intel® Virtualization Technology (Available when supported by the CPU) . 4-6

Hardware Prefetcher (Available when supported by the CPU) ................. 4-6

Adjacent Cache Line Prefetch (Available when supported by the CPU) ... 4-6

Clock Spread Spectrum ............................................................................. 4-6



CPUPPMConguration .......................................................................... 4-6

Power Technology ...................................................................................... 4-6

EIST ............................................................................................................ 4-7

Turbo Mode ................................................................................................ 4-7

CPU C3 Report, CPU C6 Report ............................................................... 4-7

CongurableTDP ....................................................................................... 4-7

CongTDPLOCK ...................................................................................... 4-7

Long Duration Power Limit ......................................................................... 4-7

Long Duration Maintained .......................................................................... 4-7

Short Duration Power Limit ........................................................................ 4-7

ACPI T State .............................................................................................. 4-7



Advanced Chipset Control............................................................................ 4-8



IDE/SATAConguration ..............................................................................4-11

SATA Controllers .......................................................................................4-11

SATA Mode Selection ................................................................................4-11

IDE Mode ..................................................................................................4-11

IDE Legacy / Native Mode Selection ........................................................4-11

Serial ATA Port 0~5 ...................................................................................4-11

AHCI Mode ............................................................................................... 4-12

Aggressive LPM Support ......................................................................... 4-12

x

X9SPV-M4 Motherboard User’s Manual

Serial ATA Port 0~5 Hot Plug ................................................................... 4-12

Serial ATA Port 0~5 Spin Up Device ........................................................ 4-12

RAID Mode ............................................................................................... 4-12

Serial ATA Port 0~5 Hot Plug ................................................................... 4-12

Serial ATA Port 0~5 Spin Up Device ........................................................ 4-12



PCIe/PCI/PnPConguration ..................................................................... 4-12

Launch PXE, Storage, Video OpROM Policy .......................................... 4-12

Other PCI device ROM priority ................................................................ 4-12

PCI Latency Timer .................................................................................... 4-12

PERR# Generation ................................................................................... 4-13

SERR# Generation ................................................................................... 4-13

ASPM Support .......................................................................................... 4-13

Maximum Read Request .......................................................................... 4-13

Above 4G Decoding ................................................................................. 4-13

VGA Palette Snoop .................................................................................. 4-13

PCI-E Slot 1 Option ROM ........................................................................ 4-16

Onboard LAN Option ROM Select ........................................................... 4-16

Onboard LAN 1 ~ LAN 4 .......................................................................... 4-16

Load Onboard LAN 1 ~ LAN 4 Option ROM ........................................... 4-16

Network Stack .......................................................................................... 4-16



SuperIOConguration ............................................................................. 4-17

Serial Port 1 ............................................................................................. 4-17

Serial Port 1 Settings .............................................................................. 4-17



RemoteAccessConguration .................................................................... 4-17

Serial Port for Out-of-Band Management/Windows Emergency Management

Services (EMS) ........................................................................................ 4-19

Console Redirection (for EMS) ................................................................ 4-19



Trusted Computing ..................................................................................... 4-20

TPM Owner .............................................................................................. 4-20

Execute TPM Command .......................................................................... 4-20

Clearing the TPM ..................................................................................... 4-20



ACPIConguration ..................................................................................... 4-20

High Precision Timer ................................................................................ 4-20



TrustedComputingConguration .............................................................. 4-20

Security Device Support ........................................................................... 4-20



IntelTXT(LT)Conguration ........................................................................ 4-21

Secure Mode Extensions (SMX) .............................................................. 4-21

Intel TXT (LT) Support .............................................................................. 4-21

xi



Intel®Anti-TheftTechnologyConguration ................................................. 4-21

Intel® Anti-Theft Technology ..................................................................... 4-21

Intel® Anti-Theft Technology Rec .............................................................. 4-21



AMTConguration...................................................................................... 4-21

Intel AMT .................................................................................................. 4-21

Un-CongureME ...................................................................................... 4-21

WatchDog ................................................................................................. 4-21



iSCSIConguration .................................................................................... 4-21

iSCSI Initiator Name ................................................................................. 4-22

Add an Attempt ......................................................................................... 4-22



Intel(R) 82579LM (x1)



Intel(R) 82574L Gigabit Network Connection (x3) ..................................... 4-23



NICConguration ....................................................................................... 4-23

Link Speed ............................................................................................... 4-23

Wake On LAN .......................................................................................... 4-23

Blink LEDs (Range 0-15 seconds) ........................................................... 4-23

PortCongurationInformation ................................................................. 4-23

4-4 Event Logs .................................................................................................... 4-24



Change SmBIOS Event Log Settings ........................................................ 4-24

Smbios Event Log .................................................................................... 4-24

Erase Event Log ....................................................................................... 4-24

When Log is Full ...................................................................................... 4-24

Log System Boot Event ........................................................................... 4-24

MECI ......................................................................................................... 4-24

METW ....................................................................................................... 4-25

View SmBIOS Event Log ......................................................................... 4-25

4-6 Boot ............................................................................................................... 4-26

Setup Prompt Timeout ............................................................................. 4-26

Boot Option Priorities ............................................................................... 4-26

Boot Option #1, Boot option #2, etc (detected boot devices) .................. 4-26

Network Devices, Hard Disk Drives, USB Device BBS Prorities, CD/DVD

ROM Drives .............................................................................................. 4-26

Boot Option #1, Boot option #2, etc (detected boot devices) .................. 4-26



Add New Boot Option ........................................................................... 4-26



Delete Boot Option ................................................................................ 4-27

4-7 Security Settings ........................................................................................... 4-27

Administrator Password .......................................................................... 4-27

User Password: ........................................................................................ 4-27

HDD Password: ........................................................................................ 4-27

Table of Contents

xii

X9SPV-M4 Motherboard User’s Manual

4-8 Exit ................................................................................................................ 4-28

Discard Changes and Exit ...................................................................... 4-28

Save Changes and Reset ........................................................................ 4-28

Discard Changes ...................................................................................... 4-28

Restore Defaults ....................................................................................... 4-28

Save As User Defaults ............................................................................. 4-29

Restore User Defaults .............................................................................. 4-29

Boot Override ........................................................................................... 4-29

Me FW Image Re-Flash ........................................................................... 4-29

Appendix A POST Error Beep Codes

Recoverable POST Error Beep Codes ......................................................................A-1

Appendix B Software Installation Instructions

B-1 Installing Software Programs ..........................................................................B-1

B-2 ConguringSuperDoctor® III .......................................................................... B-2

Appendix C UEFI BIOS Recovery Instructions

C-1 An Overview to the UEFI BIOS ......................................................................C-1

C-2 How to Recover the UEFI BIOS Image (-the Main BIOS Block)....................C-1

C-3 To Recover the Boot Sector Using a USB-Attached Device ..........................C-1

Chapter 1: Introduction

1-1

Chapter 1

Introduction

1-1 Overview

Checklist

Congratulations on purchasing your computer motherboard from an acknowledged

leader in the industry. Supermicro boards are designed with the utmost attention to

detail and to provide you with the highest standards in quality and performance.

Please check that the following items have all been included with your motherboard.

If anything listed here is damaged or missing, contact your retailer.

All the following items are included in the retail box only.

•One (1) Supermicro Motherboard with CPU and Heatsink installed

•Six (6) SATA cables

•One (1) I/O shield

•One (1) Quick-Reference Guide

Note: For your system to work properly, please follow the links below to

download all necessary drivers/utilities and the user's manual for your

motherboard.

•SMCI product manuals: http://www.supermicro.com/support/manuals/

•Product Drivers and utilities: ftp://ftp.supermicro.com/

Warning: For safety considerations, please refer to the complete list of

safety warnings posted on the Supermicro website at http://www.supermi-

cro.com/about/policies/safety_information.cfm.

If you have any questions, please contact our support team at support@supermicro.

com.

1-2

X9SPV-M4 Motherboard User's Manual

X9SPV-M4 Image

Note: All graphics and images shown in this manual were based upon the latest

PCB Revision available at the time of publishing of the manual. The motherboard

you've received may or may not look exactly the same as the image shown in

this manual.

Chapter 1: Introduction

1-3

X9SPV-M4 Motherboard Layout

Important Notes to the User

•Jumpers not indicated are for testing only.

•See Chapter 2 for detailed information on jumpers, I/O ports and JF1 front

panel connections.

•" " indicates the location of "Pin 1".

JCOM1

SRW2

JSMB1

J3

51

J21

J6

J13

JUSB1011

JUSB67

JUSB89

J2USB1

J20

LED4

LED5

LED3

I-SATA0

I-SATA1

JSD1

I-SATA5

I-SATA2

I-SATA4

I-SATA3

J1

BT1

SP1

+

LED1

JDIMM1

JDIMM2

FAN2

FAN3

1

FAN1

JBT1

JPW1

JPI2C1

1

JPK1

U3

JTPM1

JLAN1JLAN2

MH2

MH4

J2

JD1

JF1

JPME2

JEDP1

JPAC1

JPUSB1

JWD1

JWOR1

1

JI2C2

JI2C1

JRF2

JRF1

JL1

JOH1

JRF1:

O:PCUE 1X16

On:PCIE 2X8

eDP

Battery

PCIE

mini

Wake on Ring

JWOR1:

USB3.0-2/3

AUDIO FP

UNB ECC DDR3 SODIMM REQUIRED

DOG

WATCH

DP

HDMI

I2C BUS FOR PCI-E SLOT

ON:ENABLE

OFF:DISABLE

JI2C1/JI2C2:

USB10/11

DVI

USB3.0-0/1

JPAC1:

1-2:ENABLE

2-3:DISABLE

JSMB1:SMBus1

1-2:NORMAL

2-3:ME MANUFACTURING MODE

JPME2:

X9SPV-M4

MH4

JTPM1:TPM/PORT80

OVERHEAT

DOM POWER

FF ON

FAN1/CPU

USB2/3

J2USB1:USB3.0-3/4

P1-DIMMB1

USB8/9

CHASSIS INTRUSION

JSD1:SATA

JL1:

JOH1:

SLOT1 PCI-E 3.0 X16

JD1:1-3 PWR LED

4-7 SPEAKER

2-3:NMI

JWD1:

USB WAKE UP
1-2:ENABLE
2-3:DISABLE

JPUSB1:

1-2:RST

USB6/7

NMI

X

PWR LED

HDD LED NIC1 NIC2

OH/

X

RST

LAN2/4

PWR

PWR I2C

CPU

P1-DIMMA1

VGA

COM1

USB4/5

KB/MOUSE

LED2

1-4

X9SPV-M4 Motherboard User's Manual

X9SPV-M4 Quick Reference

(not drawn to scale)

Jumper Descriptions

JCOM1

JSMB1

J3

51

J21

J6

J13

JUSB1011

JUSB67

JUSB89

J2USB1

J20

I-SATA0

I-SATA1

JSD1

I-SATA5

I-SATA2

I-SATA4

I-SATA3

J1

BT1

SP1

+

LED1

JDIMM1

JDIMM2

FAN2

FAN3

1

FAN1

JBT1

JPW1

JPI2C1

1

JPK1

U3

JTPM1

JLAN1JLAN2

MH2

MH4

J2

JD1

JF1

JPME2

JEDP1

JPAC1

JPUSB1

JWD1

JWOR1

1

JI2C2

JI2C1

JRF1

JL1

JOH1

JRF1:

O:PCUE 1X16

On:PCIE 2X8

eDP

Battery

PCIE

mini

Wake on Ring

JWOR1:

USB3.0-2/3

AUDIO FP

UNB ECC DDR3 SODIMM REQUIRED

DOG

WATCH

DP

HDMI

I2C BUS FOR PCI-E SLOT

ON:ENABLE

OFF:DISABLE

JI2C1/JI2C2:

USB10/11

DVI

USB3.0-0/1

JPAC1:

1-2:ENABLE

2-3:DISABLE

JSMB1:SMBus1

1-2:NORMAL

2-3:ME MANUFACTURING MODE

JPME2:

X9SPV-M4

MH4

JTPM1:TPM/PORT80

OVERHEAT

DOM POWER

FF ON

FAN1/CPU

USB2/3

J2USB1:USB3.0-3/4

P1-DIMMB1

USB8/9

CHASSIS INTRUSION

JSD1:SATA

JL1:

JOH1:

SLOT1 PCI-E 3.0 X16

JD1:1-3 PWR LED

4-7 SPEAKER

2-3:NMI

JWD1:

USB WAKE UP
1-2:ENABLE
2-3:DISABLE

JPUSB1:

1-2:RST

USB6/7

NMI

X

PWR LED

HDD LED NIC1 NIC2

OH/

X

RST

LAN2/4

PWR

PWR I2C

CPU

P1-DIMMA1

VGA

COM1

USB4/5

KB/MOUSE

3

1

2

4

5

6

7

8

9

10

11

12

13

14

15

16

22

20
18

21
19
17

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

Item # Jumper Description Default

3

JWD1 Watch Dog Timer Reset/NMI

Pins 1-2 (Reset), 2-3 (NMI)

4,6

JI2C1/JI2C2 I2C Bus for PCI-E Slot

Short (Enabled), Open (Disabled)

7

JPME2 ME Manufacturing Mode Pins 1-2 (Normal), 2-3 (Manuf. Mode)

28

JEDP1 EDP Port Voltage Select Pins 1-2 (3.3V), 2-3 (5V)

32

JRF1 PCI-E Select (1X16 or 2X8) Short (2X8), Open (1X16)

35 JPUSB1 USB Wake-Up Enable/Disable Pins 1-2 (Enabled), 2-3 (Disabled)

38 JPAC1 Audio Enable/Disable Pins 1-2 (Enabled), 2-3 (Disabled)

42 JBT1 CMOS Reset Short contact pads to reset CMOS

Chapter 1: Introduction

1-5

Ports, LEDs, and Connectors

Item # Connector Description

1

Back Panel I/O

Please see "Back Panel IO Connectors" below, right

2

AUDIO FP Front Panel Audio Header

5

SLOT1 PCI-E 3.0 X16 Slot

8

USB 2/3 USB Header for USB Ports 2/3 (USB 3.0)

9,13

USB 10/11,8/9,6/7 USB Headers for USB Ports 10/11,8/9,6/7 (USB 2.0)

10,12,30

FAN 3,2,1 System Fan Headers (FAN1: CPU Fan)

11

JSMB1 4-pin External BMC I2C Header

14

JF1 Front Panel Control Header

15

JSD1 Disk On Module (DOM) Header

16~21

I-SATA0~5 SATA Ports 0~5

22

JTPM1 Trusted Platform Module (TPM) Header

23

JD1 Pins 1-3 Power LED Header, 4-7 External Speaker

24

JPK1 LAN3 and LAN4 LED Header (Yellow)

27

JPW1 24-pin ATX Power Header

29

eDP Embedded DisplayPort

31

JIP2C1 PWR supply (I2C) System Management Bus

33

SP1 Internal Speaker/Buzzer

34

JCOM1 Internal Serial Port (COM1)

36

CPU Intel i7 CPU, See next page for CPU information

37

BT1 System Battery

39

Mini PCIE Mini PCI-E Slot

40

JOH1 Overheat LED Header

41

JL1 Chassis Intrusion Header

43,44 DIMMA1,DIMMA2 Vertical SO DIMM Slots (DDR3, 1600/1333MHz)

45 JWOR1 Wake-On-Ring Header

Item # LED Description Color/State Status

25

LED1 Power LED

Green/Solid System On/Running

1-6

X9SPV-M4 Motherboard User's Manual

Motherboard Features

CPU Onboard, Mobile ECC, 3rd generation Intel® Core™ i7

processor (FCBGA1023)

X9SPV-M4 Core i7-3555LE, 25W, Dual Core

X9SPV-M4-3QE Core i7-3612QE, 35W, Quad Core

X9SPV-M4-3UE Core i7-3517UE, 17W, Dual Core

Memory Two (2) SO-DIMM slots support up to 16 GB of DDR3/L,

unbuffered, 1600/1333 MHz, ECC SO-DIMM memory

Supports One DIMM per Channel

DIMM sizes

ECC SO-DIMM 2 GB, 4 GB and 8GB

Chipset Mobile Intel® QM77 Express (4.1W)

Expansion Slots One (1) PCI-E 3.0 x16 (or 2 x8) Slot (x16 default), one (1)

Mini-PCIe Slot with mSATA support

Graphics Chip Intel HD Graphics 4000

Network Connections Three (3) RJ-45 Ports (Intel 82574L)

One (1) RJ-45 Port (Intel 82579LM)

AMT 8.0

I/O Devices SATA Connections

SATA 3.0 Ports Two (2) (SATA 0/1)

RAID 0, 1 Support

SATA 2.0 Ports Four (4) (SATA 2~5)

RAID 0, 1, 5, 10

USB Devices

Eight (8) USB 2.0 ports: Two (2) on the rear I/O panel, Six
(6) on headers.

Four (4) USB 3.0 ports: Two (2) on the rear I/O panel,
Two (2) on headers.

Graphics

VESA DisplayPort, HDMI, DVI-I, dual independent display,
three (3) independent displays with embedded DisplayPort

Keyboard/Mouse

Combination PS/2 Keyboard/Mouse port on the I/O
backpanel

Serial (COM) Ports

One (1) Fast UART 16550 on a header (COM1)

Chapter 1: Introduction

1-7

Super I/O

Nuvoton NCT6776F

BIOS 128 Mb SPI AMI BIOS® SM Flash BIOS

Plug and Play, ACPI 4.0, USB Keyboard and SMBIOS

2.7.1

Power ACPI/ACPM Power Management

Main Switch Override Mechanism

Suspend-To-RAM (STR)

One (1) Disk-On-Module (DOM) Power Connector

Power-on mode for AC power recovery

PC Health Monitoring CPU Monitoring

Vcore_CPU, BAT, 3.3V, 3VSB, 5V, 12V, VDIMM, VCC_SA

Tachometer Monitoring

CPU & chassis environment Monitoring

CPU Thermal Trip support

Adaptive Thermal Monitor support

Fan Control

Fan status monitoring with rmware 4-pin (Pulse Width

Modulation) fan speed control

Low noise fan speed control

System Management PECI (Platform Environment Conguration Interface) 3.0

support

AMT 8.0, vPro

SuperDoctor® III, Watch Dog, NMI

Chassis Intrusion header and detection

Operating
Environment Operating Temperature Range : 0°C ~ 60°C (32°F ~ 140°F)

Non-Operating Temperature Range: -20°C ~ 70C (-4°F ~ 158°F)

Operating Relative Humidity Range: 10% ~ 85% (non-condensing)

Non-Operating Relative Humidity Range: 10% ~ 95% (non-condensing)

CD Utilities BIOS ash upgrade utility

(Download from Website)

Drivers and software for Intel® QM77 Express chipset
utilities

Other ROHS 6/6 (Full Compliance)

One (1) TPM 1.2 Header, One (1) Audio Header

Dimensions Mini-ITX form factor (6.75" x 6.75")

1-8

X9SPV-M4 Motherboard User's Manual

Note: This is a general block diagram. Please see the Motherboard Features pages

for details on the features of the motherboard.

X9SPV-M4 Motherboard Block Diagram

PCIE[6]

PCIE[4]

PCIE[8]

PCIE[7]

Display Port

2x USB3.0 by Header

HDMI

DVI-I

DDP[C]

DDP[D]

mini_PCIe

DDP[B]

Audio CHIP
ALC888S-VD2-GR

FLASH
SPI 64Mb

SPI

1600/1333 MHz

2X USB2.0 by rear I/O

LPC

COM1 (internal header)

NCT6776F

4x SATA PORTS

LPC I/O

GLAN2
82574L

PCIe1.0_x1

2.5GT/s

DDR3 (CHA)

PCIe x16 SLOT

SVID

IMVP 7

PCIe3.0_x16

ECC-SODIMM2

RJ45

RJ45

DDR3 (CHB)

ECC-SODIMM1

1600/1333 MHz

8.0GT/s

DMI 2.0 x4

5.0GT/s

PCH

SATA 6Gb/s

USB2.0

2x SATA PORTS

GLAN1
82579LM

Debug Header

6x USB2.0 by Header

FDI X4

SATA 3Gb/s

2x USB3.0 by rear I/O

USB3.0

2.5GT/s

GLAN3
82574L

RJ45

PCIe1.0_x1

PCIe1.0_x1

2.5GT/s

GLAN4
82574L

RJ45

PCIE[5]

LPC

USB[12:4]

USB[3:0]

SATA[5:2]

SATA[1:0]

SPI

PCIe1.0_x1

2.5GT/s

EDP

AZALIA

(Or PCIe3.0 2x8)

Intel CPU

FCBGA 1023

Core i7

Intel QM77

Chapter 1: Introduction

1-9

1-2 Chipset Overview

The X9SPV-M4 Motherboard supports a single on board, 3rd generation Intel®

Core™ i7 processor (FCBGA1023 Mobile ECC CPU).

Built around the functionality and the capability of the Intel® QM77 Express

chipset, the motherboard provides substantial system performance and storage

capability for performance platforms in a compact package.

The Intel QM77 Express chipset is part of the mobile Intel Chipset family, with a

single-chip architecture. Among its features are

•4.1W Power Consumption

•Intel Active Management Technology

•Intel Anti-Theft Technology

•Intel Rapid Storage Technology

•SATA Controller (up to 6G/s)

•USB 3.0

•Smart Response Technology (SSD Cache)

For more information regarding the Intel QM77 Express chipset, please visit Intel's

website at: http://www.intel.com

1-10

X9SPV-M4 Motherboard User's Manual

1-3 PC Health Monitoring

This section describes the PC health monitoring features of the X9SPV-M4 Mother-

board. These motherboards have an onboard System Hardware Monitor chip that

supports PC health monitoring.

Recovery from AC Power Loss

BIOS provides a setting for you to determine how the system will respond when

AC power is lost and then restored to the system. You can choose for the system

to remain powered off (in which case you must hit the power switch to turn it back

on) or for it to automatically return to a power on state. See the Power Lost Control

setting in the BIOS chapter of this manual to change this setting. The default set-

ting is Last State.

Onboard Voltage Monitoring

The onboard voltage monitor will scan the following voltages continuously: Vcore_

CPU, BAT, 3.3V, 3VSB, 5V, 12V, VDIMM, VCC_SA. Once a voltage becomes

unstable, it will give a warning or send an error message to the screen. The User

can adjust the voltage thresholds to dene the sensitivity of the voltage monitor

by using SD III.

Fan Status Monitor with Software

The PC health monitor can check the RPM status of the cooling fans via Supero

Doctor III.

Chapter 1: Introduction

1-11

1-4 PowerCongurationSettings

This section describes features of your motherboard that deal with power and

power settings.

Slow Blinking LED for Suspend-State Indicator

When the CPU goes into a suspend state, the chassis power LED will start blinking

to indicate that the CPU is in suspend mode. When the user presses any key, the

CPU will wake up and the LED will automatically stop blinking and remain on.

BIOS Support for USB Keyboard

If the USB keyboard is the only keyboard in the system, it will function like a normal

keyboard during system boot-up.

Main Switch Override Mechanism

When an ATX power supply is used, the power button can function as a system

suspend button. When the user presses the power button, the system will enter a

Soft Off state. The monitor will be suspended and the hard drive will spin down.

Pressing the power button again will cause the whole system to wake up. During the

SoftOff state, the ATX power supply provides power to keep the required circuitry

in the system "alive." In case the system malfunctions and you want to turn off the

power, just press and hold the power button for 4 seconds. The power will turn off

and no power will be provided to the motherboard.

1-5 Power Supply

As with all computer products, a stable power source is necessary for proper and

reliable operation. It is even more important for processors that have high CPU

clock rates of 1 GHz and faster.

The X9SPV-M4 Motherboard accommodates 12V ATX power supplies.

Although most power supplies generally meet the specications required by the

CPU, some are inadequate. A 2-Amp of current supply on a 5V Standby rail is

strongly recommended.

1-12

X9SPV-M4 Motherboard User's Manual

1-6 Super I/O

The Super I/O provides two high-speed, 16550 compatible serial communication

ports (UARTs). Each UART includes a 16-byte send/receive FIFO, a programmable

baud rate generator, complete modem control capability and a processor interrupt

system. Both UARTs provide legacy speed with baud rate of up to 115.2 Kbps as

well as an advanced speed with baud rates of 250 K, 500 K, or 1 Mb/s, which sup-

port higher speed modems.

The Super I/O provides functions that comply with ACPI (Advanced Conguration

and Power Interface), which includes support of legacy and ACPI power manage-

ment through a SMI or SCI function pin. It also features auto power management

to reduce power consumption.

Chapter 2: Installation

2-1

Chapter 2

Installation

2-1 Static-Sensitive Devices

Electrostatic-Discharge (ESD) can damage electronic com ponents. To prevent dam-

age to your system board, it is important to handle it very carefully. The following

measures are generally sufcient to protect your equipment from ESD.

Precautions

• Use a grounded wrist strap designed to prevent static discharge.

• Touch a grounded metal object before removing the board from the antistatic

bag.

• Handle the board by its edges only; do not touch its components, peripheral

chips, memory modules or gold contacts.

• When handling chips or modules, avoid touching their pins.

• Put the motherboard and peripherals back into their antistatic bags when not in

use.

• For grounding purposes, make sure your computer chassis provides excellent

conductivity between the power supply, the case, the mounting fasteners and

the motherboard.

• Use only the correct type of onboard CMOS battery. Do not install the onboard

upside down battery to avoid possible explosion.

Unpacking

The motherboard is shipped in antistatic packaging to avoid static damage. When

unpacking the board, make sure the person handling it is static protected.

2-2

X9SPV-M4 Motherboard User's Manual

JCOM1

SRW2

JSMB1

J3

51

J21

J6

J13

JUSB1011

JUSB67

JUSB89

J2USB1

J20

LED4

LED5

LED3

I-SATA0

I-SATA1

JSD1

I-SATA5

I-SATA2

I-SATA4

I-SATA3

J1

BT1

SP1

+

LED1

JDIMM1

JDIMM2

FAN2

FAN3

1

FAN1

JBT1

JPW1

JPI2C1

1

JPK1

U3

JTPM1

JLAN1JLAN2

MH2

MH4

J2

JD1

JF1

JPME2

JEDP1

JPAC1

JPUSB1

JWD1

JWOR1

1

JI2C2

JI2C1

JRF2

JRF1

JL1

JOH1

JRF1:

O:PCUE 1X16

On:PCIE 2X8

eDP

Battery

PCIE

mini

Wake on Ring

JWOR1:

USB3.0-2/3

AUDIO FP

UNB ECC DDR3 SODIMM REQUIRED

DOG

WATCH

DP

HDMI

I2C BUS FOR PCI-E SLOT

ON:ENABLE

OFF:DISABLE

JI2C1/JI2C2:

USB10/11

DVI

USB3.0-0/1

JPAC1:

1-2:ENABLE

2-3:DISABLE

JSMB1:SMBus1

1-2:NORMAL

2-3:ME MANUFACTURING MODE

JPME2:

X9SPV-M4

MH4

JTPM1:TPM/PORT80

OVERHEAT

DOM POWER

FF ON

FAN1/CPU

USB2/3

J2USB1:USB3.0-3/4

P1-DIMMB1

USB8/9

CHASSIS INTRUSION

JSD1:SATA

JL1:

JOH1:

SLOT1 PCI-E 3.0 X16

JD1:1-3 PWR LED

4-7 SPEAKER

2-3:NMI

JWD1:

USB WAKE UP
1-2:ENABLE
2-3:DISABLE

JPUSB1:

1-2:RST

USB6/7

NMI

X

PWR LED

HDD LED NIC1 NIC2

OH/

X

RST

LAN2/4

PWR

PWR I2C

CPU

P1-DIMMA1

VGA

COM1

USB4/5

KB/MOUSE

LED2

2-2 Motherboard Installation

All motherboards have standard mounting holes to t different types of chassis.

Make sure that the locations of all the mounting holes for both motherboard and

chassis match. Although a chassis may have both plastic and metal mounting fas-

teners, metal ones are highly recommended because they ground the motherboard

to the chassis. Make sure that the metal standoffs click in or are screwed in tightly.

Then use a screwdriver to secure the motherboard onto the motherboard tray.

Caution: Some components are very close to the mounting holes. Please

take precautionary measures to prevent damage to these components

when installing the motherboard to the chassis.

Tools Needed

Philips Screwdriver

Pan head screws (4 pieces)

Location of Mounting Holes

There are four (4) mounting holes on the X9SPV-M4 Motherboard.

Stand Offs (4 pieces)

(Only if needed)

Note: The above items are not provided with this motherboard.

Chapter 2: Installation

2-3

Installation Instructions

Install the I/O shield into the chassis.

Caution: To avoid damaging the motherboard and its components, please do not

use a force greater than 8 lb/inch on each mounting screw during motherboard

installation.

Locate the mounting holes on the motherboard. Refer to the layout on the

previous page for mounting hole locations.

Locate the matching mounting holes on the chassis. Install standoffs in the

chassis as needed. Align the mounting holes on the motherboard against the

mounting holes on the chassis.

Install the motherboard into the chassis carefully to avoid damage to mother-

board components.

Insert a Pan head #6 screw into a mounting hole on the motherboard and its

matching mounting hole on the chassis, using the Philips screwdriver.

Repeat Step 4 to insert #6 screws to all mounting holes.

I/O Shield

1

2

3

Stand Off

4

5

6

Make sure that the motherboard is securely placed on the chassis.

7

2-4

X9SPV-M4 Motherboard User's Manual

Installing and Removing SODIMMs

JCOM1

SRW2

JSMB1

J3

51

J21

J6

J13

JUSB1011

JUSB67

JUSB89

J2USB1

J20

LED4

LED5

LED3

I-SATA0

I-SATA1

JSD1

I-SATA5

I-SATA2

I-SATA4

I-SATA3

J1

BT1

SP1

+

LED1

JDIMM1

JDIMM2

FAN2

FAN3

1

FAN1

JBT1

JPW1

JPI2C1

1

JPK1

U3

JTPM1

JLAN1JLAN2

MH2

MH4

J2

JD1

JF1

JPME2

JEDP1

JPAC1

JPUSB1

JWD1

JWOR1

1

JI2C2

JI2C1

JRF2

JRF1

JL1

JOH1

JRF1:

O:PCUE 1X16

On:PCIE 2X8

eDP

Battery

PCIE

mini

Wake on Ring

JWOR1:

USB3.0-2/3

AUDIO FP

UNB ECC DDR3 SODIMM REQUIRED

DOG

WATCH

DP

HDMI

I2C BUS FOR PCI-E SLOT

ON:ENABLE

OFF:DISABLE

JI2C1/JI2C2:

USB10/11

DVI

USB3.0-0/1

JPAC1:

1-2:ENABLE

2-3:DISABLE

JSMB1:SMBus1

1-2:NORMAL

2-3:ME MANUFACTURING MODE

JPME2:

X9SPV-M4

MH4

JTPM1:TPM/PORT80

OVERHEAT

DOM POWER

FF ON

FAN1/CPU

USB2/3

J2USB1:USB3.0-3/4

P1-DIMMB1

USB8/9

CHASSIS INTRUSION

JSD1:SATA

JL1:

JOH1:

SLOT1 PCI-E 3.0 X16

JD1:1-3 PWR LED

4-7 SPEAKER

2-3:NMI

JWD1:

USB WAKE UP
1-2:ENABLE
2-3:DISABLE

JPUSB1:

1-2:RST

USB6/7

NMI

X

PWR LED

HDD LED NIC1 NIC2

OH/

X

RST

LAN2/4

PWR

PWR I2C

CPU

P1-DIMMA1

VGA

COM1

USB4/5

KB/MOUSE

LED2

2-3 System Memory

CAUTION

Exercise extreme care when installing or removing DIMM

modules to prevent any possible damage.

How to Install SODIMMs

1. Insert the desired number of SODIMMs into the memory slots, starting with

DIMMA1, then DIMMB1. Pay attention to the notch along the bottom of the

module to prevent incorrect DIMM module installation.

2. Insert each SODIMM module vertically and snap it into place. Repeat step 1

to install DIMMB1 if needed. See instructions on the next page.

Memory Support

This motherboard supports up to 16 GB of DDR3/DDR3L ECC SODIMMs in 2 SODIMM

slots. It supports speeds of up to 1600MHz for DDR3 and up to 1333MHz for DDR3L

(low power).

Note: Check the Supermicro website for a list of ECC SODIMM that have

been validated with the X9SPV-M4 Motherboard.

DIMMA1

DIMMB1

Chapter 2: Installation

2-5

Insert the SODIMM

module straight down.

To Remove:

Use your thumbs to

gently push the side
clips near both ends
away from the module.
This should release

it from the slot. Pull
the SODIMM module

upwards.

The SODIMM Socket

Position the SODIMM
module's bottom key

so it aligns with the
receptive point on the

slot. Take note of the

module's side notches

and the locking clips
on the socket.

Press down until the
module locks into

place. The side clips
will automatically

secure the SODIMM
module, locking it into

place.

1

2

3

4

Align

2-6

X9SPV-M4 Motherboard User's Manual

I/O Port Locations and Denitions

2-4 Connectors/I/O Ports

The I/O ports are color coded in conformance with the PC 99 specication. See the

gure below for the colors and locations of the various I/O ports.

Back Panel Connectors and I/O Ports

JCOM1

SRW2

JSMB1

J3

51

J21

J6

J13

JUSB1011

JUSB67

JUSB89

J2USB1

J20

LED4

LED5

LED3

I-SATA0

I-SATA1

JSD1

I-SATA5

I-SATA2

I-SATA4

I-SATA3

J1

BT1

SP1

+

LED1

JDIMM1

JDIMM2

FAN2

FAN3

1

FAN1

JBT1

JPW1

JPI2C1

1

JPK1

U3

JTPM1

JLAN1JLAN2

MH2

MH4

J2

JD1

JF1

JPME2

JEDP1

JPAC1

JPUSB1

JWD1

JWOR1

1

JI2C2

JI2C1

JRF2

JRF1

JL1

JOH1

JRF1:

O:PCUE 1X16

On:PCIE 2X8

eDP

Battery

PCIE

mini

Wake on Ring

JWOR1:

USB3.0-2/3

AUDIO FP

UNB ECC DDR3 SODIMM REQUIRED

DOG

WATCH

DP

HDMI

I2C BUS FOR PCI-E SLOT

ON:ENABLE

OFF:DISABLE

JI2C1/JI2C2:

USB10/11

DVI

USB3.0-0/1

JPAC1:

1-2:ENABLE

2-3:DISABLE

JSMB1:SMBus1

1-2:NORMAL

2-3:ME MANUFACTURING MODE

JPME2:

X9SPV-M4

MH4

JTPM1:TPM/PORT80

OVERHEAT

DOM POWER

FF ON

FAN1/CPU

USB2/3

J2USB1:USB3.0-3/4

P1-DIMMB1

USB8/9

CHASSIS INTRUSION

JSD1:SATA

JL1:

JOH1:

SLOT1 PCI-E 3.0 X16

JD1:1-3 PWR LED

4-7 SPEAKER

2-3:NMI

JWD1:

USB WAKE UP
1-2:ENABLE
2-3:DISABLE

JPUSB1:

1-2:RST

USB6/7

NMI

X

PWR LED

HDD LED NIC1 NIC2

OH/

X
RST

LAN2/4

PWR

PWR I2C

CPU

P1-DIMMA1

VGA

COM1

USB4/5

KB/MOUSE

LED2

Back Panel Connectors

A. VESA DisplayPort G. USB5 (2.0)

B. HDMI Port H. LAN1

C. USB0 (3.0) I. LAN3

D. USB1 (3.0) J. LAN2

E. PS/2 KB/MS K. LAN4

F. USB4 (2.0) L. DVI-I Port

A

B

C

D

E

F

G

H

I

J

K

L