Supero SC813 Series, SC813M Series, SC813S-500, SC813S-500C, SC813T-500 Installation Manual
...
Rev. 1.0b
®
SUPER
The SC813/SC813M Chassis Series
Installation Guide
SC813/813M Chassis User's Guide
1-2
Table of Contents
Chapter I: Introduction ...............................................................1-3
A. Packing Lists ...............................................................................................1-3
B. Front Panel LED Indicators ....................................................................... 1-4
C. SC813/SC813M Chassis Specifications ................................................. 1-5
D. SC813/SC813MPower Supply Specifications ........................................ 1-6
Chapter 2: Installation Procedures ...........................................2-1
Section 1: Installing components into the SC813 Chassis....... 2-1
A. Removing the top Cover of the SC813 Chassis .................................. 2-1
B. Accessing the SCA Drive Tray to Install a Hard Drive ....................... 2-2
C. Rail Installation........................................................................................... 2-3
D. Installing the Slide Assemblies into the Rack ....................................... 2-4
E. Installing the Chassis into the Rack ........................................................ 2-5
Section 2: Appendix A: SCSI (Super) GEM Driver Installation
Instructions for Windows OS............................................................ 2-6
1-3
Chapter 1: Introduction
Chapter 1- Introduction
A. Packing Lists
A-1 The SC813 chassis
The SC813 chassis contains the following:
One (1) Slim CD ROM Drive [CDM-TEAC-24(B)]
Four (4) SCA 1" drive trays [CSE-PT39-(B)]
One (1) Slim 3.5" floppy drive [FPD-TEAC-S(B)]
Two (2) 100mm Blowers [FAN-0059]
One (1) Cold-swappable 500W power supply [PWS-0048]
One (1) Power supply backplane [CSE-PT813-PD520 for the SC813T/S-500
Series]
One (1) Power supply backplane [CSE-PT813-PD524 for the SC813T/S-500C
Series]
One (1) 4-port SATA backplane [CSE-SATA-813 (*for 813T)]
One (1) 4-port SCSI backplane [CSE-SCA-813S (*for 813S)]
The accessory box contains the following:
One set of motherboard screws
One set of drive screws
One set of HDD (hard disk drive) screws
One (1) AC power cord
Rail Packaging includes:
One pair of rear inner slides to be installed on the chassis
One pair of outer slides to be installed in the rack
Two pairs of short brackets to be used on the front side of the outer slides
(Note: One pair of short brackets include screw threads, and the other pair
do not. Use the only pair that will fit into your rack.)
One pair of long brackets to be used on the rear side of the outer slides
Optional Kits include:
The SC813 Series:
Riser Cards [CSE-RRIU-X]
Low Profile Riser Cards [CSE-RRIU-XLP]
Front Bezel [CSE-PTFB-813(B)]
The SC813C Series:
Riser Cards (64-Bit) [CSE-RRIU-X]
Riser Cards(32-Bit) [CSE-RR32]
Front Bezel [CSE-PTFB-813(B)]
SC813/813M Chassis User's Guide
1-4
A-2 The SC813M chassis:
The SC813M chassis contains the following:
Four (4) SCA 1" drive trays [CSE-PT39(B)]
One (1) 350W Power Supply [PWS-042-24] (for the 350W Series)
One (1) 300 W Power Supply [PWS-0054] (for the 300W Series)
One (1) 420 W Power Supply [PWS-0053] (for the 420W Series)
Three (3) 40mm Fans [FAN-0061] (in the 300W & 350W Series)
Four (4) 40mm Fans [FAN-0061] (in the 420W & 500W Series)
One (1) 4-port SATA backplane [CSE-SATA-813] (*for the 813MT Series)]
One (1) 4-port SCSI backplane [CSESCA-813S] (*for the 813MS Series)]
The accessory box contains the following:
One set of motherboard screws
One set of drive screws
One set of HDD (hard disk drive) screws
One (1) AC power cord
(SC813/SC813M Front Panel)
LAN2
OH
LAN1
PWR On
Reset SW
PWR SW
B. Front Panel LED Indicators
One pair of outer slides to be installed in the rack
Two pairs of short brackets to be used on the front side of the outer slides
(Note: One pair of short brackets include screw threads, and the other pair
do not. Use the only pair that will fit into your rack.)
One pair of long brackets to be used on the rear side of the outer slides
HDD
Rail Packaging includes:
One pair of rear inner slides to be installed on the chassis
Optional Kits include:
The SC813M Series:
Riser Cards(64-Bit) [CSE-RRIU-X] or Riser Cards(32-Bit) [CSE-RR32-1U]
Front Bezel [CSE-PTFB-813(B)]
1-5
Chapter 1: Introduction
C. Specifications of the SC813/SC813M Chassis
C-1. Specifications of the SC813 Chassis
C-2. Specifications of the SC813M Chassis
Model SC813S-500/500C SC813T-500/500C
Form Factor
1U Rackmount 1U Rackmount
CPU Support
Dual Xeon Processors Dual Xeon Processors
Max.
Motherboard Size
ATX 12” x 13” ATX 12” x 13”
Expansion Slots
2/1 2/1
SCA or HD Bays
Four 1”hot-swap Ultra
320/160 SCSI drive bays
(SAF-TE Compliant)
Four 1”hot-swap SATA bays
Front Side USB
Port &COM port
Optional Optional
Floppy/CD-ROM
Yes/Yes Yes/Yes
Power Supply
500W cold-swap PS 500W cold-swap PS
Cooling System
Two 100mm blower fans Two 100mm blower fans
Dimension
(W x H x D)
17.2” x 1.7” x 25.6”
(437mm x 43mm x 650 mm)
17.2” x 1.7” x 25.6”
(437mm x. 43mm x 650mm)
Weight
35 lb.
(15.9 kg)
35 lb.
(15.9 kg)
Optional Kits
Riser Cards, Front Bezel Riser Cards, Front Bezel
Model SC813MS-350C SC813MT-350C
Form Factor
1U Rackmount 1U Rackmount
CPU Support
Dual Xeon Processors Dual Xeon Processors
Max.
Motherboard Size
ATX 12” x 10” ATX 12” x 10”
Expansion Slots
1 1
SCA or HD Bays
Four 1”hot-swap Ultra 320/160
SCSI drive bays (SAF-TE
Compliant)
Four 1”hot-swap SATA bays
Front Side USB
Port & COM port
Yes Yes
Floppy/CD-ROM
No/No No/No
Power Supply
420W/350W/300W PS 420W/350W/300W PS
Cooling System
Three (3) 40mm blower fans Three (3) 40mm blower fans
Dimension
(W x H x D)
17.2” x 1.7” x 19.9”
(437mm x 43mm x 505.5 mm)
17.2” x 1.7” x 19.9”
(437mm x 43mm x 505.5 mm)
Weight
30 lb.
(13.6 kg)
30 lb.
(13.6 kg)
Optional Kits
Riser Card, Front Bezel Riser Card, Front Bezel
Loading...