Supero AOC-STGN-i1S, AOC-STGN-i2S User Manual

User's Guide

Revision 1.0c

AOC-STGN-i2S

AOC-STGN-i1S

User's Guide Revision 1.0c

Release Date: September 23, 2015

Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.

Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.

Copyright © 2015 by Super Micro Computer, Inc.
All rights reserved.

Printed in the United States of America

The information in this User's Guide has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
and makes no commitment to update or to keep current the information in this user's guide, or to
notify any person or organization of the updates. Please Note: For the most up-to-date version

of this user's guide, please see our Website at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this user's guide at any time and without notice. This product, including software and
documentation, is the property of Supermicro and/or its licensors, and is supplied only under a
license. Any use or reproduction of this product is not allowed, except as expressly permitted by
the terms of said license.

IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE
USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.
SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED
WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,
INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between the manufacturer and the customer shall be governed by the laws of
Santa Clara County in the State of California, USA. The State of California, County of Santa Clara
shall be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for
all claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class
A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the manufacturer’s instruction manual, may cause harmful
interference with radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case you will be required to correct the interference at your
own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.

WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to
the State of California to cause birth defects and other
reproductive harm.

Preface

About this User's Guide

This user's guide is written for system integrators, IT technicians and

knowledgeable end users. It provides information for the installation and use of the

AOC-STGN-i1S/-i2S add-on module.

About this Add-on Module

The AOC-STGN-i1S/-i2S 10-Gigabit Ethernet Adapter is the most exible and

scalable Ethernet adapter for today’s demanding data center environments. Based

on the Intel® 10GbE network controller 82599, the AOC-STGN-i1S/-i2S meets the

demanding needs of the next-generation data center by providing features for virtu-

alization, exibility for LAN and SAN networking, and proven reliable performance.

An Important Note to the User

All images and layouts shown in this user's guide are based upon the latest PCB

Revision available at the time of publishing. The card you have received may or

may not look exactly the same as the graphics shown in this user's guide.

Returning Merchandise for Service

A receipt or copy of your invoice marked with the date of purchase is required before

any warranty service will be rendered. You can obtain service by calling your ven-

dor for a Returned Merchandise Authorization (RMA) number. When returning the

motherboard to the manufacturer, the RMA number should be prominently displayed

on the outside of the shipping carton, and the shipping package is mailed prepaid

or hand-carried. Shipping and handling charges will be applied for all orders that

must be mailed when service is complete. For faster service, You can also request

a RMA authorization online (http://www.supermicro.com/RmaForm/).

The manufacturer warranty only covers normal consumer use and does not cover

damages incurred in shipping or from failure due to the alternation, misuse, abuse

or improper maintenance of products.

During the warranty period, contact your distributor rst for any product problems.

Preface

iii

iv

AOC-STGN-i1S/-i2S Add-on Card User's Guide

Conventions Used in the User's Guide

Pay special attention to the following symbols for proper system installation and for

safety instructions to prevent damage to the system or injury to yourself:

Warning: Important information given to ensure proper system installation

or to prevent damage to the components or injury to yourself.

Note: Additional information given for proper system setup.

SMC Networking Add-on Cards

Naming Convention

Confidential

Naming Convention for Networking Adapters

A O C – S T G N – i 2 S

1 – 2 3 4 – 5 6 7

Character Representation Options

1st Product Family AOC: Add On Card

2nd Form Factor S: Standard, P: Proprietary, C: MicroLP, U: UIO

3rd Product Type/Speed G: GbE (1Gb/s), TG: 10GbE (10Gb/s), 40G: 40GbE

(40Gb/s), IBF: FDR IB (56Gb/s), IBQ: QDR IB (40Gb/s)

4th Chipset Model (Optional) N: Niantec (82599), P: Powerville (i350),

S: Sageville (X550)

5th Chipset Manufacturer i: Intel, m: Mellanox, b: Broadcom

6th Number of Ports 1: 1 port, 2: 2 ports, 4: 4 ports

7th Connector Type (Optional) S: SFP+, T: 10GBase-T, Q: QSFP+

Model Type Form Factor Interface Controller Connection

Dimension

(w/o Brackets) (L x H)

Power

(W)

SGP-i2 GbE Standard LP PCI-E x4 Intel® i350 AM2 2 RJ45 (1Gb/port) 3.9” (9.9cm) x 2.73” (6.9cm) 3.5

SGP-i4 GbE Standard LP PCI-E x4 Intel® i350 AM4 4 RJ45 (1Gb/port) 3.9” (9.9cm) x 2.73” (6.9cm) 5

STG-b4S 10GbE Standard LP PCI-E x8 Broadcom® BCM57840S 4 SFP+ (10Gb/port) 5.4” (13.7cm) x 2.73” (6.9cm) 14

STG-i2T 10GbE Standard LP PCI-E x8 I

ntel® X540 2 RJ45 (10Gb/port) 5.9” (14.99cm) x 2.73” (6.9cm) 13

STGN-i2S 10GbE Standard LP PCI-E x8 Intel® 82599ES 2 SFP+ (10Gb/port) 4.0” (10.2cm) x 2.73” (6.9cm) 11.2

STGN-i1S 10GbE Standard LP PCI-E x8 Intel® 82598EN 1 SFP+ (10Gb/port) 4.0” (10.2cm) x 2.73” (6.9cm) 10

STG-i4S 10GbE Standard LP PCI-E x8 Intel® XL710-AM1 4 SFP+ (10Gb/port) 5.9” (14.9cm) x 2.73” (6.9cm) 8

S40G-i2Q 40GbE Standard LP PCI-E x8 Intel® XL710 AM2 2 QS

FP+ (40Gb/port) 5.9” (14.9cm) x 2.73” (6.9cm) 7

PG-i2+ GbE Proprietary PCI-E x4 Intel® 82576EB 2 RJ45 (1Gb/port) 3.78” (9.6cm) x 2.44” (6.2cm) 3

PTG-i1S 10GbE Proprietary PCI-E x8 Intel® 82599EN 1 SFP+ (10Gb/port) 10.04” (25.5cm) x .78” (2.0cm) 7.5

UG-i4 GbE UIO FH PCI-E x8 Intel® 82571EB 4 RJ45 (1Gb/port) 6.6” (16.7cm) x 3.9” (9.8cm) 10

CGP-i2 GbE MicroLP PCI-E x4 Intel® i350 AM2 2 RJ45 (1Gb/port) 4.45” (11.3cm) x 1.54” (3.9cm) 4

CG-i2 GbE MicroLP PCI-E x4 Intel® 82580 2 RJ45 (1Gb/port) 4.45” (11.3cm) x 1.3” (3.4cm) 4

CIBF-m1 FDR IB M icroLP PCI-E x8 Mellanox® ConnectX-3 1 QSFP (56Gb/port) 4.85" (12.3cm) x 1.54" (3.9cm) 7

CIBQ-m1 QDR IB MicroLP PCI-E x8 Mellanox® ConnectX-3 1 QSFP (40Gb/port) 4.85" (12.3cm) x 1.54" (3.9cm) 7

CTG-i1S 10GbE MicroLP PCI-E x8 Intel® 82599EN 1 SFP+ (10Gb/port) 4.85" (12.3cm) x 1.54" (3.9cm) 10

CTG-i2S 10GbE MicroLP PCI-E x8 Intel®

82599ES 2 SFP+ (10Gb/port) 4.85" (12.3cm) x 1.54" (3.9cm) 11

CTG-i2T 10GbE MicroLP PCI-E x8 Intel® X540 2 RJ45 (10Gb/port) 4.8” (12.3cm) x 2.75” (7.7cm) 13

CTGS-i2T 10GbE MicroLP PCI-E x4 Intel® X550 2 RJ45 (10Gb/port) 4.45” (11.3cm) x 1.54” (3.9cm) 12

v

Preface

Contacting Supermicro

Headquarters

Address: Super Micro Computer, Inc.

980 Rock Ave.

San Jose, CA 95131 U.S.A.

Tel: [phone]

Fax: [phone]

Email: [e-mail] (General Information)

[e-mail] (Technical Support)

Website: www.supermicro.com

Europe

Address: Super Micro Computer B.V.

Het Sterrenbeeld 28, 5215 ML

's-Hertogenbosch, The Netherlands

Tel: [phone]

Fax: [phone]

Email: [e-mail] (General Information)

[e-mail] (Technical Support)

[e-mail] (Customer Support)

Website: www.supermicro.nl

Asia-Pacic

Address: Super Micro Computer, Inc.

3F, No. 150, Jian 1st Rd.

Zhonghe Dist., New Taipei City 235

Taiwan (R.O.C)

Tel: [phone]

Fax: [phone]

Email: [e-mail]

Website: www.supermicro.com.tw

Table of Contents

Preface

Chapter 1 Overview

1-1 Overview ......................................................................................................... 1-1

1-2 Product Highlights ........................................................................................... 1-1

1-3 Technical Specications .................................................................................. 1-2

General ............................................................................................................ 1-2

I/O Features .................................................................................................... 1-2

Virtualization Features..................................................................................... 1-2

Manageability Features ................................................................................... 1-3

OS Support ..................................................................................................... 1-3

Cable Support ................................................................................................. 1-4

Operation Conditions ...................................................................................... 1-4

Physical Dimensions ....................................................................................... 1-4

Optional Accessories ..................................................................................... 1-4

Compliance/Environmental ............................................................................. 1-5

1-4 SMC Platform Support .................................................................................... 1-5

Chapter 2 Hardware Components

2-1 Add-On Card Image and Layout ..................................................................... 2-1

2-2 Major Components .......................................................................................... 2-3

2-3 Connectors and LAN LED Indicators .............................................................. 2-4

LAN Ports ................................................................................................... 2-4

LAN LED .................................................................................................... 2-4

NC-SI Connector ........................................................................................ 2-5

Chapter 3 Installation

3-1 Static-Sensitive Devices .................................................................................. 3-1

Precautions ..................................................................................................... 3-1

Unpacking ....................................................................................................... 3-1

3-2 Before Installation ........................................................................................... 3-2

3-3 Installing the Add-on Card .............................................................................. 3-2

3-4 Installing Drivers on Windows ......................................................................... 3-3

3-5 Installing Drivers on Linux ............................................................................... 3-3

Build a Binary RPM Package.......................................................................... 3-3

3-6 Installing Drivers on FreeBSD ........................................................................ 3-5

AOC-STGN-i1S/-i2S Add-on Card User's Guide

vi

Chapter 1: Overview

1-1

Chapter 1

Overview

1-1 Overview

Congratulations on purchasing your add-on card from an acknowledged leader in

the industry. Supermicro products are designed with the utmost attention to detail

to provide you with the highest standards in quality and performance. For product

support and updates, please refer to our website at http://www.supermicro.com/

products/nfo/networking.cfm#adapter.

1-2 Product Highlights

The product highlights of this add-on card include the following:

• Single/Dual SFP+ Connector

• Standard Low-prole

• PCI Express 2.0 (up to 5GT/s)

• Intel® QuickData Technology

• VMDq, Next-Generation VMDq, and PC-SIG SR-IOV for Virtualized Environ-

ments

• Load Balancing on Multiple CPUs

• iSCSI Remote Boot Support

• Fibre Channel over Ethernet (FCoE) Support

• Support for most Network Operating Systems (NOSs)

• Support both DAC Twin Axial and LC Fiber-Optic Cables

• Network Controller Sideband Interface (NC-SI) (Rev. 2.10 or newer)

• RoHS compliant 6/6

1-2

AOC-STGN-i1S/-i2S Add-on Card User's Guide

1-3 Technical Specications

General

• Intel® 82599EN 10GbE controller (AOC-STGN-i1S) / Intel 82599ES 10GbE

controller (AOC-STGN-i2S)

• Standard low-prole form factor

• Single SFP+ port (AOC-STGN-i1S)

• Dual SFP+ ports (AOC-STGN-i2S)

• PCI-E 2.0 x8 (5GT/s)

• Load balancing on multiple CPUs

• iSCSI remote boot support

• Fibre Channel over Ethernet (FCoE) Support

• Intel® PROSet Utility for Windows® Device Manager

I/O Features

• Intel® QuickData Technology: DMA engine that enhances data acceleration and

lowers CPU usage

• Direct Cache Access (DCA) to avoid cache misses

• MSI-X support to minimize the overhead of interrupts allowing load-balancing

between multiple cores/CPUs

• Tx/Rx IP, SCTP, TCP and UDP checksum ofoading capabilities (IPv4, IPv6)

• Receive and Transmit Side Scaling for Windows environments and Scalable

I/O for Linux environments

Virtualization Features

• Supports virtualization features such as VMDq, Next-generation VMDq (64

queues per port) and PC-SIG SR-IOV implementation

Chapter 1: Overview

1-3

• IPv6 Ofoading

• Advanced Packet Filtering

• VLAN support to allow creation of multiple VLAN segments

• VXLAN through Software

Manageability Features

• Preboot eXecution Environment (PXE) support

• Simple Network Management Protocol (SNMP) and Remote

• Network Monitoring (RMON) statistics counters

• iSCSI remote boot

• NC-SI for remote management (Only supported with Supermicro motherboards

with corresponding NC-SI connectors)

OS Support

• Windows® Server 2012 (x64 edition)

• Windows® 8 (x64 edition and 32-bit)

• Windows® Server 2008 R2 (x64 edition and 64-bit)

• Windows® Server 2008 (x64 edition, 64-bit, and 32-bit)

• Windows® 7 (x64 edition and 32-bit)

• Windows® Vista (x64 edition and 32-bit)

• Windows® Server 2003 (x64 edition, 64-bit, and 32-bit)

• VMWare

• RedHat EL, SuSe SLES

• FreeBSD