Supermicro X10DAX, X10DAI, X10DAC User Manual

UPERMICR

!

1

2

3

4

6

7

8

9

5

JSD2

USB7/8(3.0)

I-SATA2

I-SATA0

LAN1/2

USB5/6(3.0)

S

R

X10DaI/X10DaC/X10DaX

QuICk referenCe guIDe rev 1.0b

ContaCt InformatIon

• Website: www.supermicro.com

• General Information: [e-mail]

• Tech Support: [e-mail]

• Phone: [phone], Fax: [phone]

for your system to work ProPerly, Please DownloaD aPPro-

PrIate DrIvers/Images/user's manual from the lInks below:

• Manuals: http://www.supermicro.com/support/manuals/

• Drivers & Utilities:

• Safety:

http://www.supermicro.com/about/policies/safety_information.cfm

http://www.supermicro.com/wftp

PaCkage Contents

• One (1) Supermicro Motherboard

• One (1) I/O Shield (MCP-260-00045-1N)

• One (1) Quick Reference Guide

• Six (6) SATA Cables (For X10DAi/X10DAX)

• Two (2) SATA Cables (For X10DAC)

• Two (2) SAS Cables (For X10DAC)

WARNING: This product can expose you to chemicals including
lead, known to the State of California to cause cancer and birth
defects or other reproduc�ve harm. For more informa�on, go
to www.P65Warnings.ca.gov.

Motherboard Layout and Features

Audio CTRL

CPU2SLOT2 PCI-E 3.0 X8

J30

JI2C1

I-SATA8

I-SATA6

I-SATA4

JSD1

I-SATA3

I-SATA1

USB4

JTPM1

J23

FANA

JL1

J29

JI2C2

JPME2

T-SGPIO1

T-SGPIO2

T-SGPIO3

USB2/3

TPM/PORT80

JS6

CPU1 SLOT1 PCI-E 3.0 X16

I-SATA9

I-SATA7

JBT1

I-SATA5

DS1

JS5

UARTO

JS7

MDIO

JPS1

JBR1

J19

SAS
CTRL

SAS4~7

CPU1 SLOT3 PCI-E 3.0 X16

BT1

PCH

SAS0~3

JS2

CPU Installation

Socket Keys

CPU Keys

Note 1: Graphics shown in this quick reference guide are for illustration only. Your components may or may not look exactly the same as the drawings shown here.
Note 2: For optimized airow, please follow your chassis airow direction to install the correct CPU heatsink direction.

LAN CTRL

JSPDIF_OUT1

JSPDIF_IN1

CPU2 SLOT4 PCI-E 3.0 X8

BIOS
LICENSE

Battery

Battery

USB9/10(3.0)

SP1

JD1

FAN3

CPU Pin1

JSTBY1

JWD1

LAN CTRL

FAN5

JPL1

JPL2

PCH SLOT6 PCI-E 2.0 X4 (IN X8)

CPU2 SLOT5 PCI-E 3.0 X16

JTBT1

MAC CODE

BAR CODE

SAS CODE

Insert and tighten the
screws in the sequence
as shown below.

FAN4

P2 DIMME1

P2 DIMMF1

P2 DIMME2

P2 DIMMF2

CLOSE 1st

X10DAi/DAC/DAX

Rev. 1.02

CPU1

CLOSE 1st

P1 DIMMC1

P1 DIMMC2

P1 DIMMD1

P1 DIMMD2

FAN2

Heatsink Installation

Screw#1

Motherboard

Screw#3

OPEN 1st

FAN6

CPU2

JAUDIO1

OPEN 1st

P1 DIMMB2

P1 DIMMB1

P1 DIMMA2

Screw#2

P1 DIMMA1

AUDIO_FP

USB0/1

FAN7

P2 DIMMH1

P2 DIMMH2

P2 DIMMG1

P2 DIMMG2

JPWR1

JPI2C1

JPP1

JPP0

JPWR2

J24

JF1

FP CTRL

LE2

FAN1

Front Panel Control (JF1)

1 2

Power Button

Reset Button

PWR

Reset

Vcc

Vcc

Vcc

Vcc

Vcc

Vcc

X

19 20

= mounting hole

Ground

Ground

PWR Fail LED

OH/Fan Fail LED

NIC2 LED

NIC1 LED

HDD LED

Power LED

X

GroundNMI

Jumpers and Connectors

Jumper Description Default Setting

JBT1 Clear CMOS See Chapter 2

JII2C1/JII2C2 SMBus to PCI-E Slots Pins 2-3 (Normal)

JPL1 GLAN1 & GLAN2 Enable/Disable Pins 1-2 (Enabled)

JPL2 GLAN2 Enable/Disable Pins 1-2 (Enabled)

JPME2 Manufacture Mode Select Pins 1-2 (ME Mode)

JPS1 (X10DAC Only) SAS Enable Pins 1-2 (Enabled)

JWD1 Watch Dog Pins 1-2 (Reset)

Connector Description

Audio_FP (JA1) Audio Connector for Front Access

JAudio1 7.1 HD (8-channel High-Denition) Audio Connector

BT1 Onboard CMOS Battery (See Chapter 3 for Used Battery Disposal)

CPU1 Slot1/Slot3 PCI-E 3.0 x16 Slots (Note: CPU1 has to be installed.)

CPU2 Slot5 PCI-E 3.0 x16 Slot (This slot is available when CPU2 is installed.)

CPU2 Slot2 PCI-E 3.0 x8 Slot (This slot is available when CPU2 is installed.)

CPU2 Slot4 PCI-E 3.0 x8 Slot (The slots are available when CPU2 is installed.)

PCH Slot6 PCI-E 2.0 x4 in x8 Slot

FAN1-7, FANA CPU/System Fan Headers

J24 ATX 24-Pin Power Connector (See Warning on Page 1-6.)

JD1 Speaker/Power LED Indicator

JF1 Front Panel Control Header

JL1 Chassis Intrusion

JPII2C1 Power Supply SMBbus I2C Header

JPWR1/JPWR2 12V 8-Pin Power Connectors (See Warning on Page 1-6.)

JSD1/JSD2 SATA DOM (Device_On_Module) Power Connectors

JSPDIF_In SPDIF_(Sony/Philips Digital Interface)_In Header

JSPDIF_Out SPDIF_(Sony/Philips Digital Interface)_Out Header

JTBT1 GPIO Header for Thunderbolt Add-on Card

JTPM1 TPM (Trusted Platform Module)/Port 80 Header

LAN1/LAN2 G-bit Ethernet Ports 1/2

I-SATA0-9 Serial_Link ATA Connections 0-9 supported by Intel PCH

SAS0-3, 4-7 (JS2) Serial_Link SCSI Connections 0-3, 4-7 supported by LSI SAS Controller

SP1 Onboard Buzzer (Internal Speaker)

STBY1 Standby Power Header

T-SGPIO 1/2/3 Serial-Link General_Purpose IO Headers 1/2/3

USB 5/6 (3.0) Rear USB 3.0 Ports 5/6

USB 7/8 (3.0) Rear USB 3.0 Ports 7/8

USB 9/10 (3.0) Front-accessible USB 3.0 Connections 9/10

USB 0/1 Rear USB 2.0 Connections 0/1

USB 2/3 Front-accessible USB 2.0 Connections 2/3

USB 4 Type A USB 2.0 Connector USB 4

LED Description State Status

DS2 (X10DAC Only) SAS Heartbeat LED Green: Blinking SAS: Normal

LE2 Standby PWR LED Green: On SB Power On

Note: Refer to Chapter 1 of the user manual for detailed information on jumpers, connectors,

and LED indicators.

Jumpers

Connectors

LED Indicators

CPU Support

Dual Intel® E5-2600v3/v4 Series Processors (Socket R3-LGA 2011); each processor

supports dual full-width Intel QuickPath Interconnect (QPI) links (of up to 9.6 GT/s one

direction per QPI).

Memory Support

This motherboard supports up to 2048 GB of Registered (RDIMM)/Load Reduced

(LRDIMM) ECC DDR4 2133/1866/1600 MHz memory modules in 16 DIMM slots.

Note: Memory speed support is pending on the CPUs installed on the moth-

erboard. For the latest memory updates, please refer to the Tested Memory
List posted on our website (http://www.supermicro.com/products/motherboard).

Populating DDR4 RDIMM/LRDIMM Memory Modules

Populating RDIMM/LRDIMM DDR4
Memory Modules for the E5-2600v3­based Motherboard

Populating RDIMM/LRDIMM DDR4
Memory Modules for the E5-2600v4-

Speed (MT/s)
Voltage (V)

based Motherboard

Installing DIMM Memory Modules

Notches

Release Tabs

Back Panel I/O Connectors

1. Rear USB 3.0 Port 5

10

12

14

11

13

Note: Refer to Chapter 2 of the user manual for detailed information on memory support and CPU/motherboard
installation instructions.

2. Rear USB 3.0 Port 6

3. Rear USB 2.0 Port 0

4. Rear USB 2.0 Port 1

5. SPDIF_Out

6. Surround_Out

7. CEN/LFE_Out

8. Mic_In

9. Line-Out

10. Line_In

11. Gigabit LAN 1

12. Gigabit LAN 2

13. Rear USB 3.0 Port 7

14. Rear USB 3.0 Port 8

MNL-1563-QRG-10b

© 2018 Supermicro Computer Inc. All rights reserved. Reproduction of this document whether in part or in whole is strictly prohibited without

Supermicro's written consent. All Trademarks are property of their respective entities. All information provided is deemed accurate at the time

of printing; however, it is not guaranteed.