Supermicro SC846 X9 User Manual
SC846 X9 Universal Air Shroud
User’s Guide
Revison 1.0
SC846 Air Shroud User’s Guide
The information in this User’s Guide has been carefully reviewed and is believed to be accurate. The
vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no
commitment to update or to keep current the information in this manual, or to notify any person or
organization of the updates. P lease Note: For the most up-to-date version of this manual, please see
our web site at www.supermicro.com.
Super Micro Computer, Inc. (“Supermicro”) reserves the right to make changes to the product described
in this manual at any time and without notice. This product, including software, if any , and document at ion
may not, in whole or in part, be copied, photocopied, reprodu ced, t ranslated or redu ced to a ny medium or
machine without prior written consent.
IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIA L DAMAGES ARISING FROM THE USE OR INABILITY TO USE
THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY HARDWARE,
SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF
REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE,
SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governe d by the laws of Santa Clara
County in the State of Californ i a, USA. The State of California, County of Santa Clara shall be the
exclusive venue for the resolution of any such disputes. Super Micro's total liability for all claims will not
exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital
device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the manufacturer’s instruction manual, may cause harmful interference with radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference,
in which case you will be required to correct the interference at your own expense.
California Best Management Practices Regulat ions for Perchlorate Materials: This Perchlorate warning
applies only to products containing CR (Manganese Dioxide) Lithium coin cells. Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate for further
details.
WARNING: HANDLING OF LEAD SOLDER MATERIALS USED IN THIS
PRODUCT MAY EXPOSE YOU TO LEAD, A CHEMICAL KNOWN TO THE
STATE OF CALIFORNIA TO CAUSE BIRTH DEFECTS AND OTHER
REPRODUCTIVE HARM.
Manual Revison 1.0
Release Date: October 3, 2011
Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy
any part of this document.
Information in this document is subject to change without notice. Other products and companies referred
to herein are trademarks or registered trademarks of their respective companies or mark holders.
Copyright © 201 1 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
ii
Preface
About this Manual
This manual is written for professional system integrators, Information Technology
professionals, service personnel and technicians. It provides information for the
installation and use of Supermicro's SC846 X9 universal air shroud. Installation and
maintenance should be performed by experienced professionals only.
Manual Organization
Chapter 1: Introduction
The first chapter provides a checklist of the main components included with the SC846
X9 universal air shroud and describes its main features.
Chapter 2: System Safety
You should familiarize yourself with this chapter for a general overview of safety
precautions that should be followed when installing and servicing the SC846 X9
universal air shroud.
Chapter 3: Configuration and Installation
Refer here for details on installing and configuring the SC846 X9 universal air shroud on
a computer system mainboard.
iii
SC846 Air Shroud User’s Guide
Notes
iv
Table of Contents
Chapter 1 Introduction.......................................................................1-1
1-1 Overview.............................................................................................1-1
1-2 Product Checklist of Typical Components.....................................1-1
1-3 Features..............................................................................................1-2
1-4 Returning Merchandise for Service................................................1-2
1-5 Contacting Supermicro.....................................................................1-3
Chapter 2 System Safety..................................................................2-1
2-1 Electrical Safety Precautions...........................................................2-1
2-2 General Safety Precautions.............................................................2-2
2-3 Electrostatic Discharge Precautions ..............................................2-2
2-4 Operating Precautions......................................................................2-2
Chapter 3 Configuration and Installation...............................3-1
3-1 Overview.............................................................................................3-1
3-2 SC846 X9 Universal Air Shroud Components..............................3-1
Component Part B ..................................................................................3-2
Component Part C..................................................................................3-3
Component Part D..................................................................................3-4
Component Part E ..................................................................................3-5
3-3 Removing Breakable Tabs for Cabling..........................................3-6
3-4 Configuring the SC846 X9 Universal Air Shroud.........................3-7
3-5 Installing the SC846 X9 Universal Air Shroud..............................3-9
:
v
SC846 Air Shroud User’s Guide
vi
Chapter 1
Introduction
1-1 Overview
The SC846 X9 universal air shroud is a configurable air shroud for system mainboards
to enable maximum efficient air flow through the system. It can be configured to fit
different sized system mainboards of the same general shape and size. The SC846 X9
universal air shroud is optimized for use with Supermicro SC846 series chassis designs
and for Supermicro X8DTx/X9DRx/H8DGx series mainboards. See Chapter 3 for
configuration details.
1-2 Product Checklist of Typical Components
The SC846 X9 universal air shroud comes packaged with components and parts as
shown in Table 1-1:
Table 1-1. SC846 X9 Universal Air Shroud Parts and Components
Part Number Description Quantity
MCP-310-49003-0N SC846 Intel DP X9 universal PC air shroud 13.68”x13/12”x13” motherboard
MCP-310-49005-1N SC846 X9 universal air shroud component, main body (Part A) 1
MCP-310-39003-1N SC836 X9 universal air shroud component, moving part (Part B) 1
MCP-310-28005-1N X8 air shroud universal component, partition (Part C) 1
MCP-310-28006-1N X8 universal air shroud component, tear-drop 55mm (part D) 1
MCP-310-39004-1N SC836 X9 universal air shroud component, moving part (Part E) 1
NOTE: The default configuration is for Component Parts A, B, C, D and E to all
be connected.
NOTE: Each individual part for the SC846 X9 universal air shroud is labeled
with its component part letter for easy identification.
1-1
SC846 Air Shroud User’s Guide
1-3 Features
The SC846 X9 universal air shroud includes the following features:
• Main air shroud component
• Four detachable components for creating multiple configurations
• Breakable tabs for power cable management
• Clear plastic material construction for ease of viewing
1-4 Returning Merchandise for Service
A receipt or copy of your invoice marked with the date of purchase is required before
any warranty service will be rendered. You can obtain service by calling your vendor for
a Returned Merchandise Authorization (RMA) number. When returning to the
manufacturer, the RMA number should be prominently displayed on the outside of the
shipping carton, and mailed prepaid or hand-carried. Shipping and handling charges will
be applied for all orders that must be mailed when service is complete.
For faster service, RMA authorizations may be requested online at:
http://www. supermicro.com/support/rma/
Whenever possible, repack the chassis in the original Supermicro carton, using the
original packaging material. If these are no longer available, be sure to pack the chassis
securely, using packaging material to surround the chassis so that it does not shift within
the carton and become damaged during shipping.
This warranty only covers normal consumer use and does not cover damages incurred
in shipping or from failure due to the alteration, misuse, abuse or improper maintenance
of products.
During the warranty period, contact your distributor first for any product problems.
1-2
Loading...