Supermicro C7Z97-OCE User Manual

UPERMICR

MNL-1598-QRG

D

E

G

S

C7Z97-OCE

QuICk referenCe guIde 1.0C

R

ContaCt InformatIon

• www.supermicro.com(Email:[e-mail])

• Manuals:http://www.supermicro.com/support/manuals

• Drivers&Utilities:ftp://ftp.supermicro.com

• Safety:http://www.supermicro.com/about/policies/safety_information.cfm

PaCkage Contents

• One(1)SupermicroMotherboard

• Four(4)SATACables

• One(1)I/OShield

(Appliestoindividual-pack only)

• One(1)QuickReferenceGuide

• One(1)DriverCD

Motherboard Layout and Features

I/O BACK PANEL

AUDIO FP

JL2

JI2C1/JI2C2
ON:ENABLE
OFF:DISABLE

JI2C2

JI2C1

1

1

JSTBY1

JWOR1

COM1

USB 14/15(3.0)

1

USB4/5

1

USB6/7

JWD1
JPME2

1

1

1

OC FRONT PANEL

M

OC1

OC2

OC3

HOME

PCH_SLOT1 PCI-E 2.0 X1 (INX4)

USB6_charger

1

JPUSB2

JPME1:
1-2:NORMAL
2-3:ME RECOVERY

WATCH DOG

JWD1:

1-2:RST

2-3:NMI

1

JL1

MEMORY OC

LED4

CPU_SLOT2 PCI-E 3.0 X4 (IN X16)

JWOR1:
WAKE ON RING

CLEAR CMOS

JBT1

BIOS RESTORE

JLED1

1

LED1

JF1

I-SATA1
I-SATA0

JPAC1

JSPDIF_OUT

PCH_SLOT3 PCI-E 2.0 X1 (INX4)

CPU_SLOT4 PCI-E 3.0 X8 (IN X16)

JBT1

CLEAR CMOS

JL1:

JSD1:

CHASSIS INTRUSION

SATA DOM PWR

I-SATA3
I-SATA2

JPAC1:AUDIO
1-2:ENABLE
2-3:DISABLE

JSD1

1

1

1

BAR CODE

MAC CODE

A-SATA1
A-SATA0

BIOS
LICENSE

PCH_SLOT5 PCI-E 2.0 X1 (INX4)

1

JPME1

JBR1

JPUSB2:USB6/7 Wake Up

1-2

2-3

DISABLE

ENABLE

JD1

FAN3

CPU_SLOT6 PCI-E M.2

JBR1:
1-2:NORMAL
2-3:BIOS RECOVERY

1

1

HD AUDIO

JAUDIO1

1

FAN5

C7Z97-OCE

REV:1.01

DESIGNED IN USA

Tested to Comply

With FCC Standards

FOR HOME OR OFFICE USE

ALWAYS POPULATE BLUE SOCKET FIRST

2-3:ME MANUFACTURING MODE

1-2:NORMAL

JPME2:

A-SATA0A-SATA1

I-SATA4I-SATA5

I-SATA2I-SATA3

I-SATA0I-SATA1

JLED1:
3 PIN POWER LED

JD1:
SPEAKER:1-4
BUZZER:3-4

USB 12/13

JPL2

LAN2

1-2

ENABLE

JPL2

2-3

DISABLE

1

SP1

JPW1

LAN2

(3.0)

HDMI/DP

LAN1

USB 2/3

(3.0)

JPL1

LAN1

1

1-2

ENABLE

2-3

DISABLE

JPL1

CPU

Intel 4th Gen Core
i3/i5/i7and E3-1200
V3 Series CPU

LGA 1150

UNB NON-ECC DDR3 DIMM REQUIRED

JF1

OH/FF

PWR

HDD PWR

NIC1

RST

NIC2

X

ON

LEDLED

LED

Note for VGA Cards: For a single VGA card, install the VGA card into the SLOT6 (x16) slot. For CrossFireX™ mode (two VGA
cards linked), install one card each into SLOT6 (x16) and SLOT4 (x8) slots.

CPU Installation

Heatsink Installation

Heatsink
with Fan

Mounting Hole

Motherboard

Note: Graphics shown in this quick reference guide are for illustration only. Your components may or may not look exactly the same as drawings shown in this guide.

Front Panel Control (JF1)

Power LED

HDD LED

NIC1 LED

NIC2 LED

OH/Fan Fail LED

X

Ground

Ground

VGA/DVI

2

JPW2

JVR1

DIMMA1
DIMMA2
DIMMB1
DIMMB2

JVR2

FAN2

1

PS2

USB 0/1

JPUSB1:USB0/1 Wake Up

2-3

1-2

1

JPUSB1

DISABLE

ENABLE

FAN4

1

1

POWER
BUTTON

JITP1

1

2

FAN1

CPU

JCHLED1

1

1

= mounting hole

LED_Anode+

LED_Anode+

LED_Anode+

LED_Anode+

LED_Anode+

X

Reset

Reset Button

Power Button

PWR

Jumpers, Connectors and LED Indicators

Jumpers

Jumper Description Default

JBT1 Clear CMOS (on board) (See Chpt. 2)

JI2C1/JI2C2 SMB to PCI Slots Off (Disabled)

JPAC1 Audio Enable Pins 1-2 (Enabled)

JPL1/JPL2 LAN1/LAN2 Enable Pins 1-2 (Enabled)

JPME1 Intel Manufacturing Mode Pins 2-3 (Disabled)

JPME2 Intel Recovery Mode Pins 2-3 (Disabled)

JWD1 Watch Dog Enable Pins 2-3 (NMI)

JBR1 BIOS Recovery Mode Pins 2-3 (Disabled)

JPUSB1 USB Wake Up Enable (Back Panel) Pins 1-2 (Enabled)

JPUSB2 USB Wake Up Enable (USB Headers) Pins 1-2 (Enabled)

Connectors

Connector Description

I/O Back Panel See Back Panel I/O Connectors, below right

Audio FP Front Panel Audio Header

Battery Onboard Battery

COM1 COM1 Port Header

Fan 1,2,3,4,5 System/CPU Fan Headers (Fan1: CPU Fan)

JD1 Speaker/buzzer (Pins 1~4: External Speaker, Pins 3~4: Buzzer)

JF1 Front Panel Control Header

JL1 Chassis Intrusion Header

JLED1 Power LED Indicator Header

JPW1 24-pin ATX Main Power Connector (Required)

JPW2 +12V 4-pin CPU power Connector (Required)

JSD1 SATA DOM (Disk On Module) Power Connector

JSPDIF_OUT Sony/Philips Digital Interface (S/PDIF) Out Header

JSTBY1 Standby Power Header

SP1 Internal Speaker/Buzzer

A-SATA0/1 (ASMedia) Serial ATA (SATA 3.0) Port 0/1 (6Gb/sec)

I-SATA0~3 (Intel Z97) Serial ATA (SATA 3.0) Ports 0~3 (6Gb/sec)

USB 0/1 + PS2 Back Panel Accessible USB 2.0 Ports 0/1

USB 2/3, 12/13 Back Panel Accessible USB 3.0 Ports 2/3, 12/13

USB 4/5, 6/7 Front Panel Accessible USB 2.0 Headers 4/5, 6/7

USB 14/15 (3.0) Front Panel Accessible USB 3.0 Header 14/15

JCHLED1 Chassis LED Control (Supermicro Chassis only)

OC FRONT PANEL Header for the Over-Clocking Control Panel

POWERBUTTON Internal Power Button

BIOS RESTORE Restores the BIOS from Firmware ('SUPER.ROM') on a USB memory device

OC1, OC2, OC3 Over-Clocking Buttons OC1(15%), OC2(20-25%), OC3 (User-Dened in BIOS)

HOME (Below OC3 button) Default setting (non-OC)

LED Indicators

LED Description Color/State Status

LED1 Onboard Standby PWR LED Green: Solid on Power On

LED4 Status Display Digital Readout Download the status codes below*

*Download the AMI status codes at http://www.ami.com/support/doc/ami_aptio_4.x_status_codes_pub.pdf

Note: Refer to Chapter 2 of the User Manual for detailed information on jumpers, connectors, and LED indicators.

Memory Support

The C7Z97-OCE supports up to 32GB of Unbuffered (UDIMM) DDR3 non-ECC

1600/1333/1066 MHz in 4 memor y slots. Populating these DIMM modules

with a pair of memory modules of the same type and same size will result in

interleaved memory, which will improve memory performance.

Note: For memory optimization, use only DIMM modules that have been validated by Supermicro.
For the latest memory updates, please refer to our website at http://www.supermicro.com/
products/motherboard.

DIMM Memory Installation

Towards the CPU

DIMMA1

DIMMA2 (Blue Slot)

DIMMB1

DIMMB2 (Blue Slot)

Memory Population Guidelines

When installing memory modules, the DIMM slots should be populated in the fol-

lowing order: DIMMA2, DIMMB2, then DIMMA1, DIMMB1.

• Always use DDR3 DIMM modules of the same size, type and speed.

• Mixed DIMM speeds can be installed. However, all DIMMs will run at the speed

of the slowest DIMM.

Recommended Population (Balanced)

P1-DIMMA2 P1-DIMMB2 P1-DIMMA1 P1-DIMMB1 Total System Memory

2GB 2GB 4GB

2GB 2GB 2GB 2GB 8GB

4GB 4GB 8GB

4GB 4GB 4GB 4GB 16GB

8GB 8GB 16GB

8GB 8GB 8GB 8GB 32GB

Note: Up to 32GB of memory are supported. See chapter 2 of the User Manual for

complete memory population information.

Back Panel I/O Connectors

A. PS/2 Keyboard/Mouse Port H. Gb LAN Port 1 N. Center/LFE Out

B. USB 2.0 Port 0 I. USB 3.0 Port 2 O. Surround Out

C. USB 2.0 Port 1 J. USB 3.0 Port 3 P. S/PDIF Out

D. VGA Port K. Gb LAN Port 2 Q. Line In

E. DVI Port L. USB 3.0 Port 12 R. Line Out

F. VESA DisplayPort M. USB 3.0 Port 13 S. Mic In

G. HDMI Port

N

A

F

B

C

K

H

L

I

J

M

Note: Refer to Chapter 2 of the User Manual for detailed information on memory support and CPU/
motherboard installation instructions.

Q

HD Audio

R

O

P

S

MNL-1598-QRG Rev. 1.0c

© 2014 Supermicro Computer Inc. All rights reserved. Reproduction of this document whether in part or in whole is strictly prohibited without Supermicro's written

consent. All Trademarks are property of their respective entities. All information provided is deemed accurate at the time of printing; however, it is not guaranteed.