Introduction to our new product lines:
• ,
• Rulers
• Tagging Guns & Needles
• Tagg·ng
• Fasteners
•
• Safety Pins
• Pins
• Pins
.,
• Hand Sewing Needles
Fa1s
S,a
ers
eners
ety
an
Gu
Pins
Se
s &
ee
es
le
Presented by
General Uses for Pins
• Traditional Safety Pins
• Used to fasten 2 pieces of fabric together
• Used to hold embroidery in place
• Used to patch torn or damaged clothing
• Perfect for diapers, as the safety clasp prevents the baby from
being jabbed
• Used as a temporary button or zipper
• Used in thousands of other household, craft and industrial
applications
• Black Safety Pins
• Perfect for emergency repairs without being detected on dark
fabrics
• Can be used in thousands of other household, craft and
industrial applications
• Great for attaching hunting badges
• Coilless Pins
• Have no coil to wrap around or snag delicate fabrics
• Used in creating fashion accessories
• Used to place-mark on knitting and crocheting
• Used to hold appliqué in place on delicate fabrics
• Kiltie Pins
• Used to hold skirts and kilts closed
• Used as shawl pins
• Used as horse blanket pins
• Used in creating fashion accessories
• Bank Pins
• Used when working with heavyweight material
• Used in model assembly
• Used in thousands of other household, craft and industrial
applications
• Dressmaker Pins
• Used when working with medium to lightweight materials
• Used to place Appliqué, sequins or trim
• Used in thousands of other household, craft and industrial
applications
• Black Bank Pins
• Used when working on fine fabrics
• Used in Entomology
• Used in Taxidermy
• T-Pins
• Used to hold hefty upholstery and outdoor fabric in place
• Used in model assembly
• Artist supplies
• Laundry Pins / Net Pins
• Perfect for keeping your mesh laundry bag closed and
garments inside
• Used as horse blanket pins
• Marking Pins
• Used for identification on Items such as:
• Locker I.D.s
• Swim badges
• Key holders
Quality Specifications
• Safety Pins are constructed using either hardened brass or high carbon steel, with a nickel or gilt plating
• These coatings strengthen the safety pin and help protect against rust and corrosion
• Nickel plating results in a silver colored finish
• Gilt plating results in a gold colored finish
• Black Safety Pins are constructed using either hardened brass or steel which is then specially treated to give the pins a
black matte finish
• The oxidation process makes these safety pins rust resistant
• Coilless Safety Pins are constructed using either hardened brass or high carbon steel, with a nickel or gilt plating
• These coatings strengthen the safety pin against rust and corrosion
• Nickel plating results in a silver colored finish
• Gilt plating results in a gold colored finish
• Kiltie Pins are constructed using hardened steel, with a nickel plating or gilt plating
• Nickel plating results in a silver colored finish
• Gilt plating results in a gold colored finish
• This coating makes these pins highly resistant to corrosion and oxidation
• Laundry Bag / Net Pins are constructed using stainless steel wire, with a nickel plating
• These pins have safety blunted points
• Used to secure mesh laundry bags
• Marking Pins are constructed using stainless steel
• The stainless steel construction makes these pins very long lasting and resistant to corrosion
• They are available in three shapes: Mushroom, Flared, Standard
Quality Specifications (continued)
• Bank Pins are constructed using hardened steel, with a nickel plating
• Nickel plating results in a silver colored finish
• This coating makes these pins highly resistant to corrosion and oxidation
• Heavy gauge steel
• Large rounded heads
• Dressmaker Pins are constructed using hardened steel, with a nickel plating
• Nickel plating results in a silver colored finish
• This coating makes these pins highly resistant to corrosion and oxidation
• Medium gauge steel
• Large rounded heads
• Black Bank Pins are constructed using hardened steel, which is double-coated with black enamel
• The black enamel makes these pins rust resistant
• Large rounded heads
• T-Pins are constructed using a steel inner core, with a nickel plating for rust resistance and fast, effortless insertion
• Nickel plating results in a silver colored finish
• Each T-pin features a T-bar head making it easier to grasp and see
• The sharp point penetrates even the toughest surface without bending or breaking
• The steel inner core helps keep the point sharp
• Closed “T” head eliminates snagging fabrics
Pin Code Explanation Charts
B - Black Enamel
SS = Stainless steel
Stainless Steel = Major®
You will not be able to determine the composition of a pin by its outward appearance. To assist you, please refer to the charts below.
By understanding the coding used in the pin part number, you will always be able to select the right pin for your needs..
Safety Pins
Size Inches
00 3/4" 19 mm S = Steel N = Nickel O = Open
0 7/8" 22 mm B = Brass
1 1 1/16" 27 mm
2 1 1/2" 38 mm
3 2" 51 mm
7 3" 73 mm
MM Metal Plating Sold Brand
G = Gilt C = Closed Steel = Supreme®
Oxy = Black
e.g. X-00-BGC (3/4" / 19 mm, Brass, Gilt, Closed)
Size Inches MM Metal Plating Sold Brand
7 2 1/2" 63 mm S N = Nickel C = Closed Steel = Supreme®
11 3" 76 mm S G = Gilt C = Closed
Size Inches MM Metal Plating
3 3 1/4" 82.6 mm
4 4 1/4" 108 mm
5 5" 127 mm
Brass = Major®
Kiltie Pins
Laundry Bag / Net Pins
None C = Closed Brass = Major®
Pins and T-Pins
Size Inches
16 1" 25.4 mm S = Steel N = Nickel
17 1 1/16"
20 1 1/4" 32 mm
24 1 1/2" 38 mm
28 1 3/4" 44.45 mm
32 2" 50.8 mm
Sold Brand
MM Metal Plating
27 mm
Marking Pins
Size Inches MM Metal Plating Sold Brand
ALL 2" 50.8 mm SS = Stainless Steel None C = Closed
Major® Safety Pins Specifications
Product No.
Length
Diameter
Metal
Open /
Gross
Box
Boxes
Case
X-
.0255"
X-
.0265"
X-
.0265"
X-
1 1/16"
.0290"
X-
1 1/16"
.0290"
X-
1 1/16"
.0290"
X-
1 1/16"
.0290"
Sold by the box
1 Gross = 144 pins
00-BGC
0-BGC
0-BNO
1-BGO
1-BGC
1-BNO
1-BNC
Overall
Inches / MM
3/4" 19 mm
7/8" 22 mm
7/8" 22 mm
27 mm
27 mm
27 mm
27 mm
Wire
Inches / MM
64 mm
.68 mm
.68 mm
.74 mm
.74 mm
.74 mm
.74 mm
Plating
Closed
How Many
Pins per Box
How Many
per
How Many
per
B G C 1440 10 25
B G C 1440 10 25
B N O 1440 10 25
B G O 1440 10 20
B G C 1440 10 20
B N O 1440 10 20
B N C 1440 10 20
Supreme® Safety Pin Specifications
Product No.
Metal
Plating
Many
Pins
Box
Boxes
Case
X-
.0255"
X-
.0255"
X-
.0255"
X-
1 1/16"
.0295"
X-
1 1/16"
.0310"
X-
1 1/16"
.0310"
X-
.0385"
X-
1/2"
.0385"
X-
50.8 mm
.0455"
Sold by the box Sold by the box
1 Gross = 144 pins
00-SGC
0-SGC
0-SNC
1-SGC
1-SO
1-SC
2-SO
2-SC
3-SC
Overall Length
Inches / MM
3/4 " 19 mm
7/8" 22 mm
7/8" 22 mm
1 1/2" 38 mm
1
2"
27 mm
27 mm
27 mm
38 mm
Wire Diameter
Inches / MM
64 mm
.64 mm
.64 mm
.75 mm
.79 mm
.79 mm
.99 mm
.99 mm
1.15 mm
Open /
Closed
How
per
How Many
Gross per Box
How Many
per
S G C 1440 10 25
S G C 1440 10 25
S N C 1440 10 25
S G C 1440 10 20
S N O 1440 10 20
S N C 1440 10 20
S N O 1440 10 10
S N C 1440 10 10
S N C 1440 10 10
Major® Black Safety Pins
Product No.
Metal
Open /
Closed
Sold by the box Sold by the box
1 Gross = 144 pins
X-00-OXY
X-0-OXY
X-3-OXY
Overall Length
Inches / MM
3/4" 19 mm .0270" 0.67 mm
7/8" 22 mm .0250" 0.64 mm
2" 50.8 mm .0495" 1.36 mm
Wire Diameter
Inches / MM
Plating
B OXY C 1440 10 25
B OXY C 1440 10 25
B OXY C 1440 10 10
How Many
Pins per Box
How Many
Gross per Box
How Many
Boxes per Case
Major® Coilless or French Safety Pins
Sold by the box Sold by the box
1 Gross = 144 pins
Product No.
X-00-SGC-C
X-0-BGO-C
X-0-BGC-C
X-0-SGC-C
X-1-SGC-C
Overall Length
Inches / MM
3/4" 19 mm .0270" .68 mm
7/8" 22 mm .0270" .68 mm
7/8" 22 mm .0265" .64 mm
7/8" 22 mm .0270" .68 mm
1 1/16" 27 mm .0295" .75 mm
Wire Diameter
Inches / MM
Metal Plating
S G C 1440 10 25
B G O 1440 10 25
B G C 1440 10 25
S G C 1440 10 25
S G C 1440 10 20
Open /
Closed
How Many
Pins per
Box
How Many
Gross per
Box
How Many
Boxes per
Case
Major® Kiltie Pins
Sold by the box (144 pins)
-,
Product No.
7N-KILT
11G-KILT
Overall Length
Inches / MM
2 1/2" 63.5 mm .0980" 2.48 mm
3" 76 mm .0790" 2.01 mm
Wire Diameter
Inches / MM
Metal Plating
S N C 144 1 20
S G C 144 1 20
Open /
Closed
How Many
Pins per Box
How Many
Gross per
Box
How Many
Boxes per
Case
Major® Laundry Bag/ Net Pins
Sold by the box (100 pins)
Product
No.
3NP
4NP
5NP
Overall Length
Inches / MM
3 1/4" 82.6 mm .0787"
4 1/4" 108 mm .1102"
5" 127 mm .1259"
Wire Diameter
Inches / MM
2.00 mm
2.80 mm
3.20 mm
Metal Plating
SS N C 10 10 3
SS N C 10 10 3
SS N C 10 10 3
Open /
Closed
- The pin cap can be engraved with up to 5 characters, at an additional cost.
- Minimum quantity 100 pins for customization.
How Many
Pins per
Poly- Bag
How Many
Poly-Bags
per Box
How Many
Boxes per
Case
Major® Stainless Steel Marking Pins
How Many
Sold by the box (100 pins)
Product No. Shape
M1-MS Mushroom
M2-FS Flared
M3-SS Standard
Overall Length
Inches / MM
2" 50.8 mm .060" 1.52 mm
2" 50.8 mm .060" 1.52 mm
2" 50.8 mm .054" 1.37 mm
Wire Diameter
Inches / MM
Metal Plating
SS None C 100 10
SS None C 100 10
SS None C 100 10
- The pin cap can be engraved with up to 5 characters, at an additional cost.
- Minimum quantity 100 pins for customization.
Mushroom Shaped Flared Shape Standard Shape
Open /
Closed
Pins per
Box
How Many
Boxes per
Case
Royal Ruth Nickel and Black Bank Pins
Product No.
Length
Diameter
How Many
Pounds per
Many
Master Case
Royal
17SB
1 1/16 "
0.86 mm
5
* 5 24SB
1.16 mm
5
32SB
1.16 mm
5
Royal
17BB
1 1/16"
0.70 mm
5
24BB
1 1/2"
0.90 mm
5
32BB
1.20 mm
5
Lance® Dressmaker
17SD
1 1/16"
0.70 mm
5
17SD
1 1/16"
0.70 mm
5
**
20SD
1 1/4”
0.70 mm
5
** 5 24SD
1 1/2”
0.90 mm
5
**
Size
Ruth Bank Pins
Lance® Nickel Dressmaker
Sold by the box
Inches / MM
Inches / MM
Metal
Plating
How
Boxes per
Box
-05 17
-05 24
-05 32
1 1/2" 38 mm .046”
2" 50.8 mm
27 mm .034”
.046”
S N
S N
S N
5
5
Ruth Black Bank Pins
-5 17
-5 24
-5 32
* The 17SB-05 is packed in ten (10) 1/2 pound inner packages per box
-05 * 17
-1 17
-1 20
-1 24
Pins
2" 51 mm .047”
27 mm .028”
38 mm .035”
27 mm .028”
27 mm .028”
32 mm .030”
38 mm .036”
S B
S B
S B
S N
S N
S N
S N
5
5
5
5
5
5
** The 17SD-1, 20SD-1 and 24SD-1 are packed in five (5) 1 pound inner packages per box, 25 Lbs. to a master carton
Lance® T-Pins
Size
Diameter
Approximate
All T-Pins are sold by the junior carton (5 lbs.)
How Many
Product No.
X16T-05
X20T-05
X24T-05
X28T-05
X32T-05
Inches / MM
1" 25.4 mm
1 1/4" 32 mm
1 1/2" 38 mm
1 3/4"
2" 50.8 mm
44.45 mm
Inches / MM
.0300" 0.76 mm
.0335" 0.85 mm
.0455" 1.15 mm
.0455" 1.15 mm
.0455" 1.15 mm
Metal Plating
S N 1/2 lbs. 10 5 3200 *
S N 1/2 lbs. 10 5 2200 *
S N 1/2 lbs. 10 5 900 *
S N 1/2 lbs. 10 5 800 *
S N 1/2 lbs. 10 5 750 *
Pounds per
Box
Note: * All counts per pounds are approximate and should be used as a guide only
How Many
Boxes per
Junior Carton
How Many
Junior
Cartons per
Master Case
Count per
Pound
Customization
Private label available upon
request. A minimum order
is required.
Lance®
Hand Sewing Needles
CAREFULLY CRAFTED OF CARBON STEEL
AND FULLY NICKEL PLATED
* Made to European Needle Specifications
Lance® Hand Sewing Needles
Sharps Needles are medium length needles. They are the most popular needle for general hand sewing. The # 12 Sharps
are also used by tattoo artists in applying tattoos. # 2, 3 & 4 are suitable for medium to heavy fabrics. # 5, 6, 7, 8, 9 & 10 are
suitable for light to medium fabrics. # 11 & 12 are suitable for fine fabrics or creating small delicate stitches.
Sold 40 packs of 25 needles = 1000 needles
Beading Needles are very fine and long needles, with long eyes. These needles are suitable for stinging beads, pearls and
sequins anything requiring a thin needle. Beading needles are ideal when attaching beads to a fabric that already have
embroidery. Only available in sizes 10 and 12.
Sold 40 packs of 25 needles = 1000 needles
Darning Needles (cotton) # 1-12 are long needles with long eyes and sharp points. They are used for mending, darning
using cotton or yarn, basting and layering fabrics together.
Sold 40 packs of 25 needles = 1000 needles
Crewel (Embroidery) Needles are identical in length and thickness to Sharps but have a
longer eye for easier threading when using multiple strands of thread. Because of their large
eye, these needles are ideal for people who have difficulty seeing the eye of a needle. .
Sold 40 packs of 25 needles = 1000 needles
Lance® Beading Needles
Many
How Many Packs
Sold by the box (1000 needles)
Product No. Size
10-BDG 10
12-BDG 12
Diameter
Inches / MM
.018" 0.46 mm 2.16" 55 mm 0.30 mm
.014" 0.35 mm 2.00" 51 mm 0.16 mm
Length
Inches / MM
Max Thread
Size
Minimum Bead
Size
15/0 25 40
15/0 25 40
How
per Pack
per Box
Lance® Crewel Needles
Length
Diameter
How Many
Packs
Box
1.17 mm
1.09 mm
1.02 mm
0.94 mm
0.86 mm
0.76 mm
0.69 mm
0.61 mm
0.53 mm
0.46 mm
0.42 mm
0.35 mm
Sold by the box (1000 needles)
Product No.
1-CR
2-CR
3-CR
4-CR
5-CR
6-CR
7-CR
8-CR
9-CR
10-CR
11-CR
12-CR
Size
1
2
3
4
5
6
7
8
9
10
11
12
Inches / MM
1.91" 48.5 mm
1.83" 46.5 mm
1.79" 45.5 mm
1.69" 43.0 mm
1.63" 41.5 mm
1.55" 39.5 mm
1.50" 38.0 mm
1.42" 36.0 mm
1.36" 34.5 mm
1.28" 32.5 mm
1.22" 31.0 mm
1.14" 29.0 mm
Inches / MM
.046"
.043"
.040"
.037"
.034"
.030"
.027"
.024"
.021"
.018"
.016"
.014"
per Pack
25
25
25
25
25
25
25
25
25
25
25
25
How Many
per
l
40
40
40
40
40
40
40
40
40
40
40
40
Lance® Darners Needles
Length
Diameter
How Many
per Pack
Packs
Box
1.17 mm
1.09 mm
1.02 mm
0.94 mm
0.86 mm
0.76 mm
0.69 mm
0.61 mm
0.53 mm
0.46 mm
0.42 mm
0.35 mm
1.27 mm
Sold by the box (1000 needles)
Product No.
1-DR
2-DR
3-DR
4-DR
5-DR
6-DR
7-DR
8-DR
9-DR
10-DR
11-DR
12-DR
18-DR
Size
1
2
3
4
5
6
7
8
9
10
11
12
18
Inches / MM
2.38" 60.5 mm .046"
2.28" 58.0 mm .043"
2.21" 56.0 mm .040"
2.13" 54.0 mm .037"
2.03" 51.5 mm .034"
1.94" 49.5 mm .030"
1.85" 47.0 mm .027"
1.77" 45.0 mm .024"
1.67" 42.5 mm .021"
1.59" 40.5 mm .018"
1.50" 38.0 mm .016"
1.42" 36.0 mm .014"
2.46" 62.5 mm
Inches / MM
.050"
25
25
25
25
25
25
25
25
25
25
25
25
25
How Many
per
40
40
40
40
40
40
40
40
40
40
40
40
40
Lance® Sharps Needles
Length
Diameter
How Many
per Pack
Packs
Box
1.17 mm
1.09 mm
1.02 mm
0.94 mm
0.86 mm
0.76 mm
0.69 mm
0.61 mm
0.53 mm
0.46 mm
0.42 mm
0.35 mm
Sold by the box (1000 needles)
Product No.
1-SH
2-SH
3-SH
4-SH
5-SH
6-SH
7-SH
8-SH
9-SH
10-SH
11-SH
12-SH
Size
1
2
3
4
5
6
7
8
9
10
11
12
Inches / MM
1.91" 48.5 mm .046"
1.83" 46.5 mm .043"
1.79" 45.0 mm .040"
1.69" 43.0 mm .037"
1.63" 41.5 mm .034"
1.55" 39.5 mm .030"
1.50" 38.0 mm .027"
1.42" 36.0 mm .024"
1.36" 34.5 mm .021"
1.28" 32.5 mm .018"
1.22" 31.0 mm .016"
1.14" 29.0 mm .014"
Inches / MM
25
25
25
25
25
25
25
25
25
25
25
25
How Many
per
40
40
40
40
40
40
40
40
40
40
40
40
Laser II®, Laser III & Laundry Tack®
Tagging Guns & Needles
Sabre®
Fasteners
Product No. Description
Sabre® Tagging Guns
L2R-LAN
L3R-LAN
LTG/S – LAN
Laser II® Standard
Pistol –Grip Tagger
(10651)
Laser III® Heavy Duty
Meat ID Tagger
(08958)
Laundry Tack®
Fine Fabric Tagger
(10312)
-"•
• Durable ABS construction. Solid steel and brass components.
• Lightweight and compact with a shorter "nose" makes one-hand tagging "a breeze".
• Totally interchangeable with the Mark II™ & Mark III™ needles and fasteners.
• Uses Laser II® #300-LAN standard or #700-LAN all steel heavy duty needles.
• Our unique Laser II® needle, with built in blade, is replaced in one simple step.
• For greater economy, use our #841-LAN stainless steel shaft with plastic base needle.
• Made of specially selected USDA Accepted plastics and stainless steel parts.
• Equipped with an easy to replace stainless steel ejector rod.
• It features several drain holes so debris can be flushed out quickly.
• A unique needle lock set screw that insures that the needle will not come out
accidentally. To replace the needle, unscrew the lock set screw and tap out the needle.
• Uses Laser II® #700-LAN all steel heavy duty or #300-LAN standard needle.
• For greater economy, use our #841-LAN stainless steel shaft with plastic base needle.
)
• Only gun that can be used in the meat, poultry and fish tagging process.
• Durable ABS construction. Solid steel and brass components.
• Lightweight and compact with a shorter "nose" makes one-hand tagging "a breeze".
• Totally interchangeable with the Mark II™ needles and fasteners.
• Uses our Laser II® #400-LAN all steel needle.
• For greater economy, use our #844-LAN stainless steel shaft with plastic base needle.
• Will accommodate any brand fine fasteners.
• Sold individually
• Packed one gun per box
• 50 guns per junior carton
• 100 guns per master case
Sabre® Standard Fasteners
How Many
How Many
Sold by the box
Product No. Use with the Following Guns
SBR-05-X
SBR-1-X
SBR-2-X
SBR-3-X
SBR-05 (AF05)
SBR-1 (AF1)
SBR-2 (AF2)
SBR-3 (AF3)
SBR -3B (AF3B)
BLACK
SBR-5 (AF5)
Laser II® , Laundry Tack® Gun (LTG), Mark II™, Mark III™
Laser II®, Laser III®, Mark II™, Eagle, Simba, TagFast
Laser II®, Laundry Tack® Gun (LTG), Mark II™, Eagle
Laser II® , Laundry Tack® Gun (LTG), Mark II™, Mark III™
Laser II®, Laser III, Mark II™, Eagle, Simba, TagFast
Laser II® , Laundry Tack Gun (LTG), Mark II™, Mark III™
Laser II® , Mark II™ , Eagle, Simba
Laser II®, Mark II™, Eagle, Simba and
other similar guns using needle with blade
Laser II®, Mark II™, Eagle, Simba and
other similar guns using needle with blade
Laser II®, Mark II™, Eagle, Simba and
other similar guns using needle with blade
Filament Length
Inches / MM
1/2" 12.7 mm
1" 25.4 mm
2" 50.8 mm
3" 76.2 mm
1/2" 12.7 mm
1" 25.4 mm
2" 50.8 mm
3" 76.2 mm
3" 76.2 mm
5" 127 mm
Fasteners
per Box
2500 20 50M
2500 20 50M
2500 20 50M
2500 20 50M
5000 40 200M
5000 40 200M
5000 40 200M
5000 20 100M
5000 20 100M
5000 20 100M
Boxes per
Case
Fasteners
per Case
Total
Fit all standard tagging guns including Mark II™ and Mark III™.
Tagging Gun Needles
LASER II® & LASER III® TAGGING GUN NEEDLES
• Laser II® & Laser III® needles are designed to fit the Laser series tagging guns and
many other tagging guns, including Avery Dennison guns.
• All Laser II® & Laser III® needles are machine milled from high quality carbon steel to
exacting standards. They have steel (not plastic) base.
• The # 700-LAN needle is USDA Accepted for use in the food industry.
7 -~-
LASER II® & LASER III® ECONOMY TAGGING GUN NEEDLES
• Laser II® & Laser III® Needles are designed to fit Laser series tagging guns and many
other tagging guns, including Avery Dennison guns.
• These needles have a stainless steel shaft and sturdy plastic base.
T-SERIES STANDARD TAGGING GUN NEEDLES
• T-Series Needles are designed to fit all standard tagging guns.
• T-Series Needles are used in guns with detachable cutting blades.
• All T-Series Needles are machine milled from high quality carbon steel to exacting
standards. They have a steel (not plastic) base.
Sold by the pack, each pack contains 4 Needles.
Laser Tagging Needles
Standard
Fine Fabric
10070
Heavy Duty
Heavy Duty
08913
Standard
08941
Stainless Steel Shaft
Fine Fabric
08944
Stainless Steel Shaft
Standard
Standard
Heavy Duty
08913
Sold by the pack (4 needles)
Product No.
300 –LAN
400 – LAN
700 – LAN
841 – LAN
844 – LAN
Dennison
Style #
Length
Inches / MM
1.28" 32 mm .0740" 1.88 mm All Steel
1.00" 25 mm .0540" 1.37 mm
1.28" 32 mm .0867" 2.20 mm
1.28" 32 mm .0740" 1.88 mm
1.00" 25 mm .0540" 1.37 mm
Diameter
Inches / MM
Material
All Steel
Heavy Duty
All Steel
Nickel Plated
USDA Accepted
Plastic Base
Plastic Base
Use with the Following
Guns
Laser II® Regular, Mark II™
Regular, Eagle, Simba
Laser II® Fine Fabric, Laundry
Tack® Gun (LTG), Mark II™
Fine Fabric, Mark III™ Fine
Fabric,
Fine Fabric Plus®
Laser II® and Laser III®
Regular, Mark II™ Regular,
Eagle, Simba, TagFast®
Laser II® Regular, Mark II™
Regular, Eagle, Simba and
other similar guns using
needle with blade
Laser II® Fine Fabric, Laundry
Tack® Gun (LTG), Mark II™
Fine Fabric, Eagle Fine Fabric
Needles
per
Pack
4 50
4 50
4 50
4 50
4 50
Packs
per
Box
T94 – LAN
T97 – LAN
1.28" 32 mm .0740" 1.88 mm All Steel
1.28" 32 mm .0867" 2.20 mm
All Steel
Fits all Standard guns
Fits all Standard guns
4 50
4 50
Lance®
• Aluminum Rulers
• Curves
• L-Squares
• T-Squares
• Triangles
Quality Specifications
Lance® anodized aluminum, scratch-resistant measuring tools are precision made using the highest quality materials and
the finest workmanship to guarantee smooth, clean work edges and easily-read measurements. The accuracy and clarity of
Lance® calibrations meet the highest standards in the industry.
• Curves are designed to draw the numerous contours of the human form.
• Hip Curves: Calibrations are on one edge, on both sides. Patternmakers, designers and tailors alike reach for this tool to
measure or draw hipline, trouser inseam, lapels, sleeves, skirt seams, etc.
• French Curves: Calibrations are on one edge, on both sides. Used to form arm hole curves. These tools complement the Hip
Curve by adding the various curves formerly found only in a Burmester set.
• T-Squares are available in lengths from 12" to 72“ and made of standard or heavy duty gauge aluminum. Calibrations are in 8ths
and 16ths of an inch on the blade, and in 8ths of an inch on the head. The T-Square heads are made from ABS plastic for the
greatest durability. The blue standard head is 9" long. The Green heavy duty head is 16" long.
• Triangles are excellent tools for commercial artists, draftsmen and hobbyist. They are available in angles of 30°/60°/90° or
45°/45°/90°, and in lengths from 6" to 14". They are calibrated in 16ths of an inch on one edge, one side. Each triangle has 20 or
26 circular template holes, depending on its size. The diameter of the circular template holes ranges from 1/32" to 1 3/8".
• Straight Edge Rulers are universally used tools and come in the following configurations:
• Inches: Calibrations are on two edges in 16ths and 8ths on one side.
• Inches and Centimeters: Calibrations are on two edges, on one side. Millimeters to centimeters on the top edge. Inches in
16ths on the bottom edge.
• Millimeters and Centimeters: Calibrations are on two edges, on one side. Millimeters to centimeters on the top edge and
centimeters on the bottom edge.
• Cork-Backed Inking Rulers: Calibrations are on two edges, on one side. Inches in 8ths and 16ths. Since the water-resistant
cork backing raises the ruler above the work surface, inking can be done without fear of bleeding or smearing.
Quality Specifications (continued)
• L-Squares are universally used tools and come in the following configurations:
• Standard L-Squares are calibrated in inches or centimeters. Each arm is calibrated on two edges on one side and on one
edge on the reverse side.
• Half-Size L-Squares are calibrated in inches or centimeters. Each arm is calibrated on one edge on two sides. The Half-Size
L-Square is a half scale of our Standard L-Squares.
• Mini L-Squares are calibrated in inches or centimeters. Each arm is calibrated on two edges on one side and one edge on
the reverse side. The short arm is also calibrated as a center-finding ruler.
• Lance® Black Anodized Rulers are constructed of black, anodized, hardened aluminum, .090" thick and 1" wide. They are
designed for use in demanding environments such as machine shops and factories where conditions often prove destructive for
rulers of a less hardy construction. The calibrations appear in a sharp contrast of silver against a black background and are able to
withstand extensive wear and tear .
• Specialty Rulers
• Cuff Rulers are handy accurate tools used to quickly mark trouser cuffs of various lengths and widths. Calibrated in inches,
8ths on top edge and 16ths on the bottom edge.
• Center Finding Rulers are designed as an efficient aid in finding the center between two points. They are a significant time-
saving device in pattern-making, tailoring, form design and crafts of all kind. There is a zero-point at the center of the top
edge of the ruler, with equal incremental measurements to the left and to the right in 32nds of an inch. The bottom edge is
a standard ruler calibrated in 16ths.
• Agate / Pica Rulers are precision tools used in the layout of printed material. Calibrated on two edges, on two sides.
• Side One: Inches, in 16ths on top edge and Picas on the bottom.
• Side Two: Inches, in 16ths on top edge and Agates on the bottom.
Lance® Curves
Hip Curves French Curves
Product No. Length Calibrations
HC-024-LAN 24" 1/8"
HC-060M-LAN 60 cm 1/2 cm
Product No. Length Calibrations
FC-012-LAN 12" 1/8"
FC-024-LAN 24" 1/8"
FC-032M-LAN 32 cm 1/2 cm
FC-060M-LAN 60 cm 1/2 cm
..
!'''"'T''l"'T
..
[
Lance® T-Squares
Standard T-Squares Heavy Duty T-Squares
(Blue Head 9”) (Green Head 16”)
Product No. Length-Width Calibrations
T-012-LAN 12" x 1-1/2" 1/8", 1/16"
T-015-LAN 15" x 1-1/2" 1/8", 1/16"
T-018-LAN 18" x 1-1/2" 1/8", 1/16"
T-030-LAN 30" x 1-1/2" 1/8", 1/16"
Product No. Length-Width Calibrations
HT-024-LAN 24" x 2" 1/8", 1/16"
HT-030-LAN 30" x 2" 1/8", 1/16"
HT-036-LAN 36" x 2" 1/8", 1/16"
HT-042-LAN 42" x 2" 1/8", 1/16"
HT-048-LAN 48" x 2" 1/8", 1/16"
HT-060-LAN 60" x 2" 1/8", 1/16"
HT-072-LAN 72" x 2" 1/8", 1/16"
Lance® Triangles
30°/60°/90° Triangles 45°/ 45°/90° Triangles
Product No. Length Calibrations
TR-3060-8-LAN 8" 1/16"
TR-3060-10-LAN 10" 1/16"
TR-3060-12-LAN 12" 1/16"
TR-3060-14-LAN 14" 1/16"
Product No. Length Calibrations
TR-4590-6-LAN 6" 1/16"
TR-4590-8-LAN 8" 1/16"
TR-4590-10-LAN 10" 1/16"
TR-4590-12-LAN 12" 1/16"
Lance® Straight Edge Rulers
Calibrated in Calibrated in
Inches Inches / Centimeters
Product No. Length- Width
SE-006-LAN 6" x 3/4" 1/16", 1/32"
Compressed calibration is necessary on smaller rulers (e.g. SE-006)
SE-012-LAN 12" x 1" 1/8", 1/16"
SE-015-LAN 15" x 1-1/4" 1/8", 1/16"
SE-018-LAN 18" x 1-1/4" 1/8", 1/16"
SE-024-LAN 24" x 1-1/4" 1/8", 1/16"
SE-036-LAN 36" x 2" 1/8", 1/16"
SE-048-LAN 48" x 2" 1/8", 1/16"
SE-060-LAN 60" x 2" 1/8", 1/16"
SE-072-LAN 72" x 2" 1/8", 1/16"
SE-096-LAN 96" x 2" 1/8", 1/16"
Calibrations
Product No. Length-Width Calibrations
SE-015EM-LAN 15 cm x 1.91 cm 1/32", cm
SE-030EM-LAN 30 cm x 2.54 cm 1/16", cm
SE-060EM-LAN 60 cm x 3.49 cm 1/16", cm
SE-150EM-LAN 150 cm x 3.81 cm
SE-200EM-LAN 200 cm x 3.81 cm
1/16", cm
1/16", cm
Lance® Straight Edge Rulers (continued)
Calibrated in
Centimeters
Product No. Length- Width Calibrations
SE-030M-LAN 30 cm x 3.8 cm mm, cm
SE-045M-LAN 45 cm x 3.8 cm mm, cm
SE-060M-LAN 60 cm x 3.8 cm mm, cm
SE-100M-LAN 100 cm x 3.8 cm
r~~11mrrrn
11111111m
[' 1
n111111111111111
1 2 3 4 5 6 7
1
1m1nrr111
mm, cm
n1nn111n
111
Cork-Backed Inking Rulers
Calibrated in Inches
Product No. Length-Width Calibrations
CB-006-LAN 6" x 3/4" 1/16", 1/32"
Compressed calibration is necessary on smaller rulers (e.g. SE-006)
CB-012-LAN 12" x 1" 1/8", 1/16"
CB-015-LAN 15" x 1-1/2" 1/8", 1/16"
CB-018-LAN 18" x 1-1/2" 1/8", 1/16"
CB-024-LAN 24" x 1-1/2" 1/8", 1/16"
CB-036-LAN 36" x 2" 1/8", 1/16"
CB-048-LAN 48" x 2" 1/8", 1/16"
11
1111r1
11111
1 'I' 1
11
1111111
fll
'I'
11
11
CO
';:1,1,l.
!
1
.U.
1,l,1
,l.
1,l,1,l,1,l,1,l.1,l,1
•~
2 3 4 5 6 7 8 9
91-
SI-
,l,
1,l,
1,l
,1,
l,1,
J,1
,l,
Ill 111111 11 111 fll 111111111
ti-
C
l-
1.l,
1,l
,1,l,1,l,1.l,1
l:1-
,l.l
,l,1
,l,1,l
H
,1,l,1,l,1,l,,J,1,
l,1,J,1,l,l,l
111111
01-
,1,l,1.l,1
11111111
1
M L
6
,l,1,l.
1,l,
1,l.1,I,
,;,m
I I
Lance® L-Square
1/8", 1/24", 1/32", 1/2",
1/8ths, 16ths,
Centimeters in mms,
3rds, 2/3rds, 6ths,
12ths, 24ths, 1/2s, 4ths,
1/8", 1/24", 1/32", 1/2",
1/8ths, 16ths,
Centimeters in mms,
3rds, 2/3rds, 6ths,
12ths, 24ths, 1/2s, 4ths,
Calibrated in Inches or Centimeters
Product No. Blade Length Calibrations
LS-024-LAN 24" X 14"
LS-615M-LAN 60 cm x 35 cm
:l--~
: . d
~
i w
Standard L-Square
1/4ths,
2/3rds, 6ths, 12ths
8ths, 16ths, 32nds
"=l
..:l
Half-Size L-Squares
Calibrated in Inches or Centimeters
Product No. Blade Length Calibrations
LS-012-05-LAN 12" x 6"
1/4ths,
2/3rds, 6ths, 12ths
LS-030-05M-LAN 30 cm X 16 cm
8ths, 16ths, 32nds
u
-=
" =
u
-:
- u
-=
..
-=
u
-=
..
-=
..
-=
..
--=
•
I:
11
-=
• tr-=
..
-=
,,
-=
..
-=
u
-=
-
.,
.--:::
u
-=
• --=
~
,.
=
• ·
-=
'"-=
This image has been magnified for easier readability
§'.i'''l
'l'
l''
~ 1
~
:..
....11 "'"'
;;_
=::J
;
~
I
N-
~
'l'''l'l'l"'l'l'
,q,-
J ldil1 -1L
l'''l'"l'
1,13
2 3
11
Lance® L-Square
"l'''l'
"l'''l'
l'l'
A.
'.a
m L
21
ilil1 iidili
''l'
l'J
'l'l'l'l
4'
al
i!Jlil1
'l'l'l'l'''l'
~NeE
41
''l'''l'
''l'''l'
5
,.
ililil1 i1ili11 -1
sl
"l'"l'''l'l'l
6 7 8
Mini L-Square
6J
lilil1 1
'''l
'l'l
'''
l'l'l'''
u1,
11
Lilil1 -1lil1l
01t
l'l!l'
91
sl
l'l
'l'
l''
'''''l
'l'
l''
101
91
uildiJul11li1
'l'"l'"l'''l'l'l'''l'lll
1,1 1
...............
101
21
11
1
1.
~ ~
Calibrated in Inches or Centimeters
~
2-
3
a:g;'2.D
;
~
- -:.
~-
;:
~
-::::;
~ ~
~U),..__U,_8
Product No. Blade Length Calibrations
LS-012-LAN 12" X 6"
LS-030M-LAN 30 cm x 15 cm
1/8", 1/16"
mm, cm
Lance® Black Engraved Rulers
Calibrated in Inches 16ths - Top Edge
Left to Right Right to Left
Product No. Size
TLR-012B-LAN 12"
TLR-024B-LAN 24"
TLR-036B-LAN 36"
TLR-048B-LAN 48"
TLR-060B-LAN 60"
TLR-072B-LAN 72"
TLR-096B-LAN 96"
TLR-144B-LAN 144"
Product No. Size
TRL-012B-LAN 12"
TRL-024B-LAN 24"
TRL-036B-LAN 36"
TRL-048B-LAN 48"
TRL-060B-LAN 60"
TRL-072B-LAN 72"
TRL-096B-LAN 96"
TRL-144B-LAN 144"
Calibrated in Inches 16ths – Bottom Edge
Left to Right Right to Left
Product No. Size
BLR-012B-LAN 12"
BLR-024B-LAN 24"
BLR-036B-LAN 36"
BLR-048B-LAN 48"
BLR-060B-LAN 60"
BLR-072B-LAN 72"
BLR-096B-LAN 96"
BLR-144B-LAN 144"
Product No. Size
BRL-012B-LAN 12"
BRL-024B-LAN 24"
BRL-036B-LAN 36"
BRL-048B-LAN 48"
BRL-060B-LAN 60"
BRL-072B-LAN 72"
BRL-096B-LAN 96"
BRL-144B-LAN 144"
Lance® Black Engraved Rulers
Calibrated in Centimeters & Millimeters – Top Edge
Calibrated in Inches & 16ths – Bottom Edge
Product No.
TBLR-20EM-LAN 20"
TBLR-40EM-LAN 40"
TBLR-60EM-LAN 60"
TBLR-80EM-LAN 80"
TBLR-100EM-LAN 100"
Inches / MM
Size
50.8 cm
101.6 cm
152.4 cm
203.2 cm
254.0 cm
Lance® Black Engraved Rulers
Calibrated in Centimeters & Millimeters
Top / Left to Right
Product No. Size
TLR-050B-M-LAN 50 cm
TLR-100B-M-LAN 100 cm
TLR-150B-M-LAN 150 cm
TLR-200B-M-LAN 200 cm
Bottom / Left to Right
Product No. Size
BLR-050B-M-LAN 50 cm
BLR-100B-M-LAN 100 cm
BLR-150B-M-LAN 150 cm
BLR-200B-M-LAN 200 cm
Top / Right to Left
Product No. Size
TRL-050B-M-LAN 50 cm
TRL-100B-M-LAN 100 cm
TRL-150B-M-LAN 150 cm
TRL-200B-M-LAN 200 cm
TRL-210B-M-LAN 210 cm
Bottom / Right to Left
Product No. Size
BRL-050B-M-LAN 50 cm
BRL-100B-M-LAN 100 cm
BRL-150B-M-LAN 150 cm
BRL-200B-M-LAN 200 cm
1 2 3 4 5 6 7 8 9 10
49
48 4 7 46 45 44 43 42 41 40 39 38
11
12
Lance® Specialty Rulers
Cuff Rulers
Product No. Length - Width Calibrations
CR-125-LAN
CR-150-LAN
CR-175-LAN
CR-200-LAN
CR-225-LAN
12" X 1-1/4"
12" X 1-1/2"
12" X 1-3/4"
12" X 2"
12" X 2-1/4"
CUFF
1/8", 1/16"
1/8", 1/16"
1/8", 1/16"
1/8", 1/16"
1/8", 1/16"
RULE
6 8
Agate – Pica Rulers
Center Finding Rulers
Product No. Length - Width Calibrations
CF-012-LAN
CF-018-LAN
CF-024-LAN
CF-036-LAN
CF-048-LAN
3 4 5 6 7 8 9
12" X 1 3/4"
18" X 1 3/4"
24" X 1 3/4"
36" X 1 3/4"
48" X 1 3/4"
1/16", 1/32"
1/16", 1/32"
1/16", 1/32"
1/16", 1/32"
1/16", 1/32"
Product No. Length - Width
AP-012-LAN
AP-018-LAN
AP-024-LAN
12" X 1”
18" X 1 1/2"
24" X 1 1/2"
Calibrations
1/16", picas, agates
1/16", picas, agates
1/16", picas, agates
Ruler Cross Reference
Information
AP
12"
Agate / Pica Rule
AP
18"
Agate / Pica Rule
AP
24"
Agate / Pica Rule
BLR
12" Bottom Left / Right Black Engraved Aluminum Rule
BLR
24" Bottom Left / Right Black Engraved Aluminum Rule
BLR
36" Bottom Left / Right Black Engraved Aluminum Rule
BLR
48" Bottom Left / Right Black Engraved Aluminum Rule
BLR
50cm
Bottom Left / Right Black Engraved Aluminum Rule
BLR
60" Bottom Left / Right Black Engraved Aluminum Rule
BLR
72" Bottom Left / Right Black Engraved Aluminum Rule
BLR
96" Bottom Left / Right Black Engraved Aluminum Rule
BLR
100cm
Bottom Left / Right Black Engraved Aluminum Rule
BLR
144"
Bottom Left / Right Black Engraved Aluminum Rule
BLR
150cm
Bottom Left / Right Black Engraved Aluminum Rule
BLR
200cm
Bottom Left / Right Black Engraved Aluminum Rule
BRL
12" Bottom Right / Left Black Engraved Aluminum Rule
BRL
24" Bottom Right / Left Black Engraved Aluminum Rule
BRL
36" Bottom Right / Left Black Engraved Aluminum Rule
BRL
48" Bottom Right / Left Black Engraved Aluminum Rule
BRL
50cm
Bottom Right / Left Black Engraved Aluminum Rule
BRL
60" Bottom Right / Left Black Engraved Aluminum Rule
BRL
72" Bottom Right / Left Black Engraved Aluminum Rule
BRL
96" Bottom Right / Left Black Engraved Aluminum Rule
BRL
100cm
Bottom Right / Left Black Engraved Aluminum Rule
BRL
144"
Bottom Right / Left Black Engraved Aluminum Rule
BRL
150cm
Bottom Right / Left Black Engraved Aluminum Rule
BRL
200cm
Bottom Right / Left Black Engraved Aluminum Rule
Lance® #
-012-LAN 32-112
-018-LAN 32-118
-024-LAN 32-124
-012B-LAN 82-112
-024B-LAN 82-124
-036B-LAN 82-136
-048B-LAN 82-148
-050B-M-LAN 82-205
-060B-LAN 82-160
-072B-LAN 82-172
-096B-LAN 82-196
-100B-M-LAN 82-210
-144B-LAN 82-144
-150B-M-LAN 82-215
-200B-M-LAN 82-220
-012B-LAN 83-112
-024B-LAN 83-124
-036B-LAN 83-136
-048B-LAN 83-148
-050B-M-LAN 83-205
-060B-LAN 83-160
-072B-LAN 83-172
-096B-LAN 83-196
-100B-M-LAN 83-210
-144B-LAN 83-144
-150B-M-LAN 83-215
-200B-M-LAN 83-220
Fairgate # Size
x 1"
x 1.5"
x 1.5"
Ruler Type
Special
Metric
Metric
Metric
Metric
Metric
Metric
Metric
Metric
Ruler Cross Reference
Information
CB
6”
Straight Edge Cork Back
CB
12”
Straight Edge Cork Back
CB
15”
Straight Edge Cork Back
CB
18”
Straight Edge Cork Back
CB
24”
Straight Edge Cork Back
CB
36”
Straight Edge Cork Back
CB
48”
Straight Edge Cork Back
CF
12”
Center Finding Rule
CF
18”
Center Finding Rule
CF
24”
Center Finding Rule
CF
36”
Center Finding Rule
CF
48”
Center Finding Rule
CR
12”
Cuff Rule Aluminum
CR
12” x 1.5”
Cuff Rule Aluminum
CR
12”
Cuff Rule Aluminum
CR
12”
Cuff Rule Aluminum
CR
12”
Cuff Rule Aluminum
FC
12” French Curve Aluminum
FC
24” French Curve Aluminum
FC
32cm
French Curve Aluminum
FC
60cm
French Curve Aluminum
HC
24” Hip Curve Aluminum Rule
HC
60cm
Hip Curve Aluminum Rule
HT
24” Heavy Duty T
HT
30” Heavy Duty T
HT
36” Heavy Duty T
HT
42” Heavy Duty T
Lance® #
-006-LAN 20-106
-012-LAN 20-112
-015-LAN 20-115
-018-LAN 20-118
-024-LAN 20-124
-036-LAN 20-136
-048-LAN 20-148
-012-LAN 23-112
-018-LAN 23-118
-024-LAN 23-124
-036-LAN 23-136
-048-LAN 23-148
-125-LAN 14-100
-150-LAN 14-101
-175-LAN 14-111
-200-LAN 14-102
-225-LAN 14-112
-012-LAN 12-112
-024-LAN 12-124
-032M-LAN 12-232
-060M-LAN 12-260
-024-LAN
-060M-LAN
-024-LAN 60-124
-030-LAN 60-130
-036-LAN 60-136
-042-LAN 60-142
Fairgate # Size
x 3/4”
x 1”
x 1.5”
x 1.5”
x 1.5”
x 2”
x 2”
x 1.75”
x 1.75”
x 1.75”
x 1.75”
x 1.75”
x 1.25”
x 1.75”
x 2”
x 2.25”
11-124
11-260
Ruler Type
Special
Metric
Metric
Metric
-Square
-Square
-Square
-Square
Ruler Cross Reference
Information
HT
48” Heavy Duty T
HT
60” Heavy Duty T
HT
72” Heavy Duty T
LS
12”
Mini L
LS
12”
Mini L
LS
24”
L-
LS
30cm x
Half
LS
30cm x
Mini L
LS
615 mm x 355 mm
L-
SE
6”
Straight Edge Aluminum Rule
SE
12”
Straight Edge Aluminum Rule
SE
15 cm
Straight Edge Aluminum Rule
Metric / English
SE
15”
Straight Edge Aluminum Rule
SE
18”
Straight Edge Aluminum Rule
SE
24”
Straight Edge Aluminum Rule
SE
30 cm
Straight Edge Aluminum Rule
Metric / English
SE
30 cm
Straight Edge Aluminum Rule
SE
36”
Straight Edge Aluminum Rule
SE
45 cm
Straight Edge Aluminum Rule
Metric / English
SE
48”
Straight Edge Aluminum Rule
SE
60 cm
Straight Edge Aluminum Rule
Metric / English
SE
60”
Straight Edge Aluminum Rule
SE
60 cm
Straight Edge Aluminum Rule
SE
72”
Straight Edge Aluminum Rule
SE
96”
Straight Edge Aluminum Rule
SE
1 meter
Straight Edge Aluminum Rule
SE
150 cm
Straight Edge Aluminum Rule
Lance® #
-048-LAN 60-148
-060-LAN 60-160
-072-LAN 60-172
-012-05-LAN 50-148
-012-LAN 50-147
-024-LAN 50-124
-030-05M-LAN 50-247
-030M-LAN 50-248
-615M-LAN 50-235
-006-LAN 20-106
-012-LAN 20-112
-015EM-LAN 20-115
-015-LAN 20-315
-018-LAN 20-118
-024-LAN 20-124
-030EM-LAN 20-330
-030M-LAN 21-230
-036-LAN 20-136
-045M-LAN 20-345
-048-LAN 20-148
-060EM-LAN 20-360
-060-LAN 20-160
-060M-LAN 21-260
-072-LAN 20-172
-096-LAN 20-196
-100M-LAN 20-310
-150EM-LAN 20-350
Fairgate # Size
x 6”
x 6.5”
x 14”
150mm
15cm
x 3/4”
x 1”
x 1.91 cm
x 1.25”
x 1.25”
x 1.25”
x 2.54 cm
x 35 mm
x 2”
x 35 mm
x 2”
x 35 cm
x 2”
x 35 mm
x 2”
x 2”
x 35 mm
x 3.81 cm
Ruler Type
Special
-Square
-Square
-Square
-Square Aluminum
-Square Aluminum
Square Aluminum
Size L-Square Metric
-Square Aluminum Metric
square Aluminum Metric
MM / CM
MM /CM
MM / CM
Ruler Cross Reference
Information
SE
200 cm
Straight Edge Aluminum Rule
T-
12” Standard
T-
15” Standard T
T-
18” Standard T
T-
30” Standard T
TBLR
100”
Top / Bottom Left / Right Black Engrave Rule
Metric / English
TBLR
20” Top / Bottom Left / Right Black Engrave Rule
Metric / English
TBLR
40” Top / Bottom Left / Right Black Engrave Rule
Metric / English
TBLR
60” Top / Bottom Left / Right Black Engrave Rule
Metric / English
TBLR
80” Top / Bottom Left / Right Black Engrave Rule
Metric / English
TLR
12” Top Left / Right Black Engrave Rule
TLR
24” Top Left / Right Black Engrave Rule
TLR
36” Top Left / Right Black Engrave Rule
TLR
48” Top Left / Right Black Engrave Rule
TLR
50 cm
Top Left / Right Black Engrave Rule
TLR
60” Top Left / Right Black Engrave Rule
TLR
72” Top Left / Right Black Engrave Rule
TLR
96” Top Left / Right Black Engrave Rule
TLR
100 cm
Top Left / Right Black Engrave Rule
TLR
144”
Top Left / Right Black Engrave Rule
TLR
150 cm
Top Left / Right Black Engrave Rule
TLR
200 cm
Top Left / Right Black Engrave Rule
TR
10” 30/60 Template Triangle
TR
12” 30/60 Template Triangle
TR
14” 30/60 Template Triangle
TR
8” 30/60 Template Triangle
TR
10” 45/90 Template Triangle
Lance® #
-200EM-LAN 20-320
012-LAN 63-112
015-LAN 63-115
018-LAN 63-118
030-LAN 63-130
-100EM-LAN 80-300
-20EM-LAN 80-320
-40EM-LAN 80-340
-60EM-LAN 80-360
-80EM-LAN 80-380
-012B-LAN 80-112
-024B-LAN 80-124
-036B-LAN 80-136
-048B-LAN 80-148
-050B-M-LAN 80-205
-060B-LAN 80-160
-072B-LAN 80-172
-096B-LAN 80-196
-100B-M-LAN 80-210
-144B-LAN 80-144
-150B-M-LAN 80-215
-200B-M-LAN 80-220
-3060-10-LAN 70-110
-3060-12-LAN 70-112
-3060-14-LAN 70-114
-3060-8-LAN 70-108
-4590-10-LAN 71-110
Fairgate # Size
x 3.81 cm
Ruler Type
Special
Metric
T-Square
-Square
-Square
-Square
Metric
Metric
Metric
Metric
Ruler Cross Reference
Information
TR
12"
45/90 Template Triangles
TR
6" 45/90 Template Triangles
TR
8" 45/90 Template Triangles
TRL
12" Top Right / Left Black Engraved Rule
TRL
24" Top Right / Left Black Engraved Rule
TRL
36" Top Right / Left Black Engraved Rule
TRL
48" Top Right / Left Black Engraved Rule
TRL
50 cm
Top Right / Left Black Engraved Rule
TRL
60" Top Right / Left Black Engraved Rule
TRL
72" Top Right / Left Black Engraved Rule
TRL
96" Top Right / Left Black Engraved Rule
TRL
100 cm
Top Right / Left Black Engraved Rule
TRL
144"
Top Right / Left Black Engraved Rule
TRL
150 cm
Top Right / Left Black Engraved Rule
TRL
200 cm
Top Right / Left Black Engraved Rule
TRL
210 cm
Top Right / Left Black Engraved Rule
Lance® #
-4590-12-LAN 71-112
-4590-6-LAN 71-106
-4590-8-LAN 71-108
-012B-LAN 81-112
-024B-LAN 81-124
-036B-LAN 81-136
-048B-LAN 81-148
-050B-M-LAN 81-205
-060B-LAN 81-160
-072B-LAN 81-172
-096B-LAN 81-196
-100B-M-LAN 81-210
-144B-LAN 81-144
-150B-M-LAN 81-215
-200B-M-LAN 81-220
-210B-M-LAN Not Available
Fairgate # Size
Ruler Type
Special
Metric
Metric
Metric
Metric
Metric
Loading...