Super Hero VC9388 Instruction Manual

Instruction Manual

Carpet
Shampooer

500w

VC9388 ZW-9006A - Bagless

Speci cation Parameters

Rated Voltage: 220-240V
Rated Power: 500W
Rated Frequency: 50HZ
Net Weight: 8kg

ZW-9006A - Bagless

02 SUPERHERO CARPET SHAMPOOER

Congratulations on your purchase of your new
Superhero carpet shampooer. There are many
useful features built into your shampooer and we
recommend that you carefully read this instruction
manual so that you may take best advantage of
them.

BEFORE YOU BEGIN

This product must be operated in accordance
with these instructions and used only for domestic
cleaning to remove dirt and dust from household
carpets, ooring and fabrics.

PLEASE READ THESE INSTRUCTIONS
THOROUGHLY

This will ensure you obtain full benet from your
new carpet shampooer. Keep this Instruction
Manual in a handy place for future reference.

IMPORTANT

Always switch the appliance o and remove the
plug from the electricity supply before cleaning
your appliance, when not in use, or attempting any
maintenance task. The cleaner must only be
connected to an AC supply at the voltage shown
on the rating plate. This cleaner should only be
used for its intended purpose as described in these
instructions. Never operate the carpet shampooer
without lters.

•

Do not handle the plug or carpet shampooer
with wet hands.

•

Do not put any objects into the openings or
operate with the openings blocked. Keep them
free of anything that may reduce airow.

•

Keep hair, loose clothing, ngers and all parts
of the body away from openings and moving
parts.

•

Do not use the carpet shampooer on any
glowing, burning or smoking particles.

•

Do not use without the solution tank and dirty
water tank in place.

•

Turn o all controls before unplugging.

•

Do not use to pick up ammable or
combustible liquids such as petrol, or use in
areas where they may be present.

•

Do not immerse the carpet shampooer into
water or other liquids

NOTE: Carpets should be dry vacuumed
thoroughly before washing. Use a vacuum cleaner
with a powerbrush for best results.

NOTE: If the power cord is damaged it must be
replaced by an authorised service agent or similarly
qualied persons.

This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience
and knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety.

Children should be supervised to ensure that they
do not play with the appliance.

If using an extension cord please make sure that it
is of an approved type and that it is fully extended.
Failure to do so could cause your cleaner to
overheat and damage it.

FAULTS

Consult the troubleshooting guide in this manual
if your carpet shampooer fails to operate properly.
Do not continue to use this appliance if it appears
to be faulty or the supply cord is damaged. If a fault
cannot be rectied, please return to the point of
purchase.

AFTER USE

Switch the cleaner o and remove the plug from
the electricity supply. Always switch o and remove
the plug before attaching any accessories or
cleaning the appliance.

PROTECTING THE ENVIRONMENT

When you have unpacked the unit, do not simply
throw the packing into the household waste. Take
them to an appropriate collecting point for the
recycling.

Please read this manual before operating cleaner

SUPERHERO CARPET SHAMPOOER 03

Parts and components description

SUPERHERO CARPET SHAMPOOER

1

2

3

5

7

6

4

1. Handle

2. Trigger

3. Rod

4. Clean water tank release button

5. Clean water tank

6. Dirty water tank release latch

7. Dirty water tank

04 SUPERHERO CARPET SHAMPOOER

Assembly and Use

The appliance should be switched o and
disconnected from the mains supply before you
start to assemble.

1. Assembly

a. Line up mid-section with base unit and slot into

place. Insert and tighten screws to x into place.

See g. 1

b. Insert handle into mid-section ensuring that the

solution trigger is at the back of the appliance.
Slot handle into neck, insert and tighten screw
to x into place.

See g. 2

c. Insert clean water tank and appliance is fully

assembled.

See g. 3

g. 1

g. 1

g. 2

g. 3

g. 1

g. 2

g. 3