SuperGreen IR-30, IR-234, IR-245, IR-260, IR-288 Operation & Installation Manual

...
OPERATION & INSTALLATION MANUAL
IR-30, IR-234, IR-245, IR-260, IR-288, IR-14K220, IR-18K220
Electric Tankless Hot Water Heater
Table of Contents
INTRODUCTION....................................................................................................... 2
Unit Operation ........................................................................................................ 2
Unit Freezing .......................................................................................................... 2
Maintenance ........................................................................................................... 2
Included Parts List ................................................................................................... 2
INTERFACE .............................................................................................................. 3
IR-30, IR-234, IR-245, IR-260, IR-288 ...................................................................... 3
IR-14K220, IR-18K220............................................................................................. 4
MOUNTING YOUR WATER HEATER ........................................................................... 5
ELECTRICAL INSTALLATION .................................................................................... 7
IR-30 Wiring Diagram .............................................................................................. 8
IR-234, IR-245, IR-260, and IR-288 Wiring Diagram ................................................... 8
14K220 and 18K220 Wiring Diagram ......................................................................... 9
HOW TO CALIBRATE .............................................................................................. 10
TROUBLE SHOOTING ............................................................................................. 11
WARRANTY ........................................................................................................... 12
Thank you for choosing SuperGreen products. The most advanced tankless water heaters in the world today using quartz technology and true modulation. All of our products are made with the highest grade materials and professionally assembled. We strive to satisfy each customer with our unit’s superior quality, longevity, and the modern design of all our products. Before use of the unit, please carefully read and understand the manual. It contains important information regar d ing the correct use and care of the unit.
SAFETY INFORMATION
IT IS IMPORTANT TO COMPLETELY READ AND UNDERSTAND THE INSTALLATION
PROCEDURES BEFORE CONTINUING THE INSTALLATION.
FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN PROPERTY DAMAGE,
SERIOUS BODILY INJURY, OR DEATH. THIS PRODUCT SHOULD BE INSTALLED BY A LICENSED ELECTRICIAN AND PLUMBER IN ACCORDANCE W ITH ALL NATIONAL, STATE, AND LO CAL ELECTRICAL & PLUMBING CODES.
Keep this manual in a convenient place for future reference.
Check our website,
www.supergreenusa.com for the
latest version of the Installation & User Manual.
DANGER! WATER TEMPERATURE SAFETY SETTING Safety is our pri mary goal when selecting the water temperature. Any temperature above 120°F can cause seri ous scal di n g or death. Energy conservation is a factor to be considered when selecting the water temperature. Setting the water heater’s thermostat to a lower setting will allow a higher flow rate and use less energy.
Page | 1
INTRODUCTION
SuperGreen Tankless hot water heaters do not store water like a conventional tank-type water heater. It contains multiple high powered quartz heating tube elements that are capable of heating water “on-demand” and continuously as needed , so you wi ll never h ave to worry about running out of hot water again. The unit’s working principle and designs are simple. When the power is turned on, the microprocess or will check t he temperature sensor and curr ent leakage sens or, if there ar e no errors, the hot water generator is ready to work. The performance of the products listed are dependent on incoming water temp, water flow rate, and set temperature of the thermostat. In order for it to function properly it must be matched by location, application, and unit size. As it requires no venting, all units can be installed literally anywhere that is convenient for the owner. This product should be installed indoors only. An outdoor installation is permitted as long as it is mounted in a suitable enclosure that protects it from all-weather elements including freezing. Freezing of the unit may result in permanent damage and will void the warranty.
Unit Operation:
When you open the hot water valve, the flow sensor activates at a minimum water flow. The flow sensor sends the information to the temperature controller to begin modulating the heating elements to heat the water as it passes through the quartz heating tubes and to maximize efficiency. If the wat er fl ow rat e exce eds th e m axi mu m h ea ti ng capacity of the unit, the unit will reach a maximum achievable tempe rature based on f low rate and un it size. When a red uction in the excessive flow rate is made, the unit will achieve the set point temperature. When the fixture is closed, the demand stops, the flow sensor sends information to the controller to turn off the power to the quartz heating elements. The unit remains in it standby mode until the demand for the hot water is needed.
Unit Freezing:
In case of fr eezing, pl ease wait for th e complete defrosting of the unit before using. Verify this by running water through it before turning on the power. Activating unit while still frozen will damage the heaters internal components and void the warranty.
Maintenance:
This unit requires no maintenance. To extend unit service life, it is recommended to use an inlet pre filter, check and clean it periodically. This is an additional part from the internal screen included with the unit. Do not attempt to open the case to make adjustments, repairs, or for any reason. Opening of unit will void all warranties and could result in serious injury or property damage.
Included Parts List:
Electric water heater
Water (adjust) valve
Wall Mount bracket
Screws
Internal scree n
Page | 2
INTERFACE
When you open the hot w ater valve , the flow se nsor activa tes at a minimum water flow. The flow sensor sends the information to the temperature controller to be gin modulating the heating elements to heat the water as it passes through the quartz heating tubes and to maximize efficiency. If the water flow rate excee ds the maximum he ati ng ca pac i ty o f the unit , the unit will reach a maximum achievable temperature based on flow rate and unit size. When a reduction in the e xcessive flow rate i s made, the unit w ill achieve the set point temperature. When the fixture is closed, the demand stops, the flow sensor sends information to the controller to turn off the power to the quartz heating elements. The unit r emains in it standby mo de until the demand for the hot water is needed.
IR-30, IR-234, IR-245, IR-260, IR-288
Page | 3
Loading...
+ 10 hidden pages