Super Circuits ATX-GSM Quick Start Manual
1 www.supercircuits.com ATX-GSM_RQ
Using the ATX-GSM
1. To charge the DVR, plug the USB cable provided into the USB por t on the side of the DVR, then into
a USB port of a computer or the power adapter provided. It will take abou t 5 hours to fully charge
the DVR.
2. Insert an ac tive GSM SIM card into DVR. Insert the card with the top of the card toward the back of
the unit, then push the card in until it clicks into place (see the product photo to the le ft). You can
use either a contracted AT&T™ card or a contracted or prepaid T-Mobile® card (preferred). After
the GSM SIM card is installed, the LED will light gre en for about 6 seconds, indicat ing the device is
working.
GSM SIM
card
microSD
card
Back
side
3. Place a call to the phone number of the installed GSM SIM card. You will be able to hear audio from
the device. In this mode, your ATX-GSM is functioning as a voice monitor.
ATX-GSM GSM Bug – Mini Audio/Video
Recorder Quick Start Guide
The ATX-GSM is a small, digital audio an d video recorder (DVR) with remote control u sing SMS commands
through GSM. It is must useful for live audio monitoring, or audio recording. The product include s the DVR
unit, USB cable and power adapter, and clip, magnetic, and sur face mounting brackets. An ac tive GSM SIM
card and micro-SD card (cards not provided) are require d to use this product.
Manual
record
switch
LED
USB port
Microphone Camera
GSM SIM*
card slot
microSD*
card slot
DVR front-left side
DVR front-right side
* Shown with c ards installed.
2 www.supercircuits.com © 2012 Supercircuits, Inc. All rights reserved.
NOTE: If you remove the GSM SIM card from the ATX-GSM, or set the Manual Record s witch to o, the
DVR will switch o.
Specic ations
Parame ter Value
Pixels 300,00 0
Resolu tion 320 x 240
Frames p er second 6.5
File ty pe 3GP (QuickTim e®, MMS)
Operat ing temperatu re 14 °F ~ 140 °F
Operat ing humidity 20% ~ 80%
Batte ry capacit y 650 mA
Standby ti me 8 ~ 10 days (maximu m)
Talk time 200 hr
Size (h x w x d) 1.97 in x 1.38 in x .67 in (50 mm x 35 mm x 17 mm)
Power 5 Vdc from USB or a dapter (provid ed)
For the SMS commands
1. Insert a microSD card (maximum 8GB) into card slot on the r ight side of the DVR.
2. Send an SMS message “000” to the phone number of the GSM SIM card. A few seconds later
you will receive the SMS reply “Welcome to use edog your number *** **** has bind
success!”. The phone that you sent the message from is now the only phone that can control the
DVR.
3. Send an SMS message “111” to the phone number of the GSM SIM card. Within 5 ~ 10 minutes,
the DVR will reply with a video clip to your phone via MMS. NOTE: The times tamp of the message
in your phone will be earlier than the actual time/day your message was sent. You may have to
scroll up in your mes sage list to nd the video clip.
4. Send an SMS message “222” to the phone number of the GSM SIM card. The device will star t
recording video and reply with the me ssage “Video record is beginning! Please send 333 to
stop it later!”. Video les are saved to the microSD card.
5. Send an SMS message “333” to the phone number of the GSM SIM card. The DVR will stop
recording and reply with the message “Video record save!”.
6. Send an SMS message “555” to the phone number of the GSM SIM card. The device will star t
voice-only recording.
7. Send an SMS message “666” to the phone number of the GSM SIM card. The device will stop voice
recording, then save the voice les to the microSD card.
Loading...